Repair or Replacement of Defective Product Sample Clauses

Repair or Replacement of Defective Product. In accordance with Jabil’s standard return material authorization process and procedure (“RMA”), Jabil will either repair or replace, in its sole discretion, any Product that contains a defect caused by a breach of the warranty set forth in this Section 5 provided that the Product is received within thirty (30) days following the end of any applicable Warranty Period (“RMA Product”). If Company desires to return a Product based on a claim of breach of the warranty set forth in this Section 5, Company shall request an RMA number from Jabil. Company shall then consign the alleged defective Product, FOB Jabil’s designated repair facility, and specify the Jabil assigned RMA number. Jabil will analyze any such RMA Product and, if a breach of warranty is found (“Defect”), then Jabil will repair or replace the RMA Product within fifteen (15 ) business days of receipt by Jabil of the RMA Product and all required associated documentation. In the event a Defect is found, Jabil will reimburse Company for the reasonable cost of transporting the RMA Product to Jabil’s designated repair facility and Jabil will deliver the repaired RMA Product or its replacement, FCA Company’s designated destination. [***] incurred to analyze and, if requested by Company, repair or replace the non-Defective RMA Product and [***].
Sample 1Sample 2Sample 3See All (14)
AutoNDA by SimpleDocs
Repair or Replacement of Defective Product. Kin Yat may elect, in its sole discretion, to repair or re-manufacture any Non-Conforming Products caused by a breach of the warranty set forth in this Section 5. Any such repair or re-manufacture shall be pursuant to Kin Yat’s standard return material authorization process and procedure (“RMA”), pursuant to which iRobot will request an RMA number from Kin Yat for such Non-Conforming Product. Portions of this Exhibit were omitted and have been filed separately with the Secretary of the Commission pursuant to the Company’s application requesting confidential treatment under Rule 24b-2 of the Exchange Act - [***] denotes omissions. iRobot shall then consign the Non-Conforming Products along with objective documentation of the applicable breach of warranty (“Defect”), FOB Kin Yat’s repair facility in the same country and region as the Non-Conforming Products (or such other location as agreed to by the Parties in writing), and specify the Kin Yat assigned RMA number. Kin Yat will repair or re-manufacture the Non-Conforming Products within [***] of receipt by Kin Yat of such Non-Conforming Products, and in the event the Defect is confirmed, Kin Yat will reimburse iRobot for the reasonable cost of transporting the Non-Conforming Products to Kin Yat’s designated facility and Kin Yat will deliver the repaired or re-manufactured Products, FCA iRobot’s designated destination. If no such Defect is confirmed, iRobot shall reimburse Kin Yat for all fees, costs and expenses incurred to analyze and, if requested by iRobot, repair or re-manufacture the non-defective Products and iRobot shall bear responsibility for all transportation costs to and from Kin Yat’s designated repair facility.
Sample 1Sample 2Sample 3See All (12)
Repair or Replacement of Defective Product. In accordance with Jabil’s standard return material authorization process and procedure (“RMA”), Jabil will either repair or replace or credit [****], any Product, including a Product previously accepted by Company, that contains a defect caused by a breach of the warranty set forth in Section 5.1 provided that the Product is received by Jabil within [****] following the end of any applicable Warranty Period (“RMA Product”). Jabil will analyze any such RMA Product and, if a breach of the Product Warranty is found (“Defect” or “Defective”), then Jabil will repair or replace the RMA Product within [****] of receipt by Jabil of the RMA Product and all required associated documentation. If Jabil determines no such Defect is found, Parties shall follow the dispute resolution process, as outlined in Section 4.6.2.
Sample 1Sample 2
Repair or Replacement of Defective Product. As a sole remedy, Supplier shall, at its election, either repair or replace any Product that contains a defect caused by a breach of the warranty set forth in Section 5.1. If Buyer desires to return a Product based on a breach of the warranty set forth in Section 5.1 (“RMA Product”), Buyer will send a request to Supplier and Supplier will provide Buyer with an RMA number. Xxxxx will return the allegedly defective Product to the Supplier’s facility, specifying the RMA number and including documentation describing the nature of the defect, how it was discovered and under what conditions it occurred. Supplier will analyze any such RMA Product and, if a breach of warranty is found, then Supplier will promptly repair or replace the RMA Product following receipt by Supplier of the RMA Product and all required associated documentation. In the event a defect is found, Supplier will reimburse Buyer for the reasonable cost of transporting the RMA Product to the Supplier’s facility and Supplier will promptly ship the repaired RMA Product or its replacement to Buyer. All repaired Products will be warranted for a period of one hundred twenty (120) days from the date of shipment to Buyer or the remainder of the original Warranty Period, whichever is greater. If no defect is found, Buyer will reimburse Supplier for all reasonable fees, costs, and expenses incurred by Supplier in handling the non-defective item, and transportation costs to and from the Supplier facility will be borne by Buyer.
Sample 1
Repair or Replacement of Defective Product. In accordance with Jabil’s standard return material authorization process and procedure ("RMA"), Jabil shall either repair or replace, in its sole discretion, any Product that contains a defect caused by a breach of the warranty set forth in Article 11.2 provided that the Product is received within thirty (30) days following the end of any applicable Warranty Period (“RMA Product”). If Quantum desires to return a Product based on a claim of breach of the warranty set forth in Article 11.2, Quantum shall request an RMA number from Jabil. *****. Quantum shall pay all shipping, transportation, insurance, freight forwarding and other costs relevant to DDP shipments incurred in connection with the shipment of all such defective Products to Jabil’s repair facility. Jabil shall analyze any such RMA Product and:
Sample 1

Related to Repair or Replacement of Defective Product

  • Defective Product Seller must guarantee a return for all defective products. a) Goods rejected by Buyer for whatever reason shall be held, transported and/or stored at Seller’s sole expense. Seller shall promptly reimburse Buyer for any such expenses. B) Defective product purchase COD will be returned COD to Seller or COD check will be cancelled, at Buyer’s discretion. c) Seller is responsible for all costs associated RoHS noncompliance returns and will accept a full return for all parts not meeting RoHS compliance criteria if necessary. d) Seller is 100% responsible for all monetary and/or rework costs associated with product failures in addition to any further cost whatsoever associated with product failures. e) If suspect parts/counterfeit parts are furnished under this agreement such parts shall be impounded by Buyer. Buyer may provide a sample batch Supplier for verification and authentication. In addition, Buyer reserves the right to send such items to the appropriate manufacturer and appropriate authorities for investigation. f) Seller shall be liable for all costs relating to impound, investigation, removal, or replacement of suspect/counterfeit parts.

  • Defective Products None of the Group Companies has manufactured, sold or supplied products which are, or were, in any material respect, faulty or defective, or which do not comply in any material respect with any representations or warranties expressly made by such Group Company, or with all applicable regulations, standards and requirements.

  • Tooling Unless otherwise specified in this Agreement, all tooling and/or all other articles required for the performance hereof shall be furnished by Seller, maintained in good condition and replaced when necessary at Seller's expense. If NETAPP agrees to pay Seller for special tooling or other items either separately or as a stated part of the unit price of Goods purchased herein, title to same shall be and remain in NETAPP upon payment therefore.

  • Product Warranty Seller provides general warranties of fitness and general warranties that the goods are free from defects, for 1 year from acceptance of the goods, except as may otherwise be set forth in the Description/Proposal, or other attached warranty.

  • Raw Materials Lonza shall procure all required Raw Materials as well as consumables other than those Raw Materials that are Customer Materials. Customer shall be responsible for payment for all consumables and Raw Materials ordered or irrevocably committed to be procured by Lonza hereunder. Upon cancellation of any Batch or termination of the Agreement, all unused Raw Materials shall be paid for by Customer within [***] days of invoice and at Customer’s option will either be (a) held by Lonza for future use for the production of Product, (b) delivered to Customer, or (c) disposed of by Lonza.

  • Additional Equipment Additional Equipment may from time to time be added as the subject matter of this Agreement as agreed on by the parties. Any additional property will be added in an amendment describing the property, the monthly rental, security deposit, and stipulated loss value of the additional Equipment. All amendments must be in writing and signed by both parties. Other than by this amendment procedure, this Agreement may not be amended, modified, or altered in any manner except in writing signed by both parties.

  • Removal of Equipment Subject, always, to the other terms and provisions of this Fee Agreement, the Company and any Sponsor Affiliates shall be entitled to remove and dispose of components of the Project from the Project in its sole discretion with the result that said components shall no longer be considered a part of the Project and, to the extent such constitute Economic Development Property, shall no longer be subject to the terms of this Fee Agreement. Economic Development Property is disposed of only when it is scrapped or sold or removed from the Project. If it is removed from the Project, it is subject to ad valorem property taxes to the extent the Property remains in the State and is otherwise subject to ad valorem property taxes.

  • Leased Equipment The risk of loss or damage to leased equipment, goods or property shall not transfer to the University except as provided in §680.219, Florida Statutes. Any security interest in the leased equipment, goods or property granted to the Contractor contrary to AGO 79-72 and AGO 80-9 is null and void. Limitations of remedies provisions, which are unconscionable under applicable Florida law, are void. MATERIAL SAFETY DATA SHEET (MSDS). In compliance with Florida Statutes, Ch. 442, a Material Safety Data Sheet (MSDS) must accompany any applicable item delivered under this Agreement.

  • Latent Defects Notwithstanding anything to the contrary set forth herein, no acceptance, or deemed acceptance, by City pursuant to this Section shall be applicable with respect to any Latent Defects. An acceptance, or deemed acceptance, by City pursuant to this Section shall not mean that City has accepted, or the other party has been relieved of, responsibility for: (i) compliance with the Laws; (ii) the proper application of construction means or methods; or (iii) correcting any portion of the Project if it later is determined that any portion of the Project is inconsistent with the Final Documents and Drawings.

  • Supply of Materials The following materials will be supplied by the department Name of Materials Rate. Place of delivery 1.

Time is Money Join Law Insider Premium to draft better contracts faster.