Dynamic test definition

Dynamic test means the test during which lifting machinery is operated in all its possible configurations at the maximum working load multiplied by the appropriate dynamic test coefficient with account being taken of the dynamic behaviour of the lifting machinery in order to check that it functions properly.
Sample 1Sample 2Sample 3
Dynamic test means the test during which the machinery is operated in all its possible configurations at maximum working load with account being taken of the dynamic behaviour of the machinery in order to check that the machinery and safety features are functioning properly.
Sample 1Sample 2
Dynamic test means a test which complies with the requirements of para- graph 3(7);
Sample 1Sample 2Sample 3

Examples of Dynamic test in a sentence

  • Tolerances(a) Static test, see paragraph (b)(3) – 2.a(1), (2), and (3) of the table of FSTD validation tests.(b) Dynamic test – ± 0.9 daN (2 lbs) or ± 10% on dynamic increment above static test.The competent authority is open to alternative means such as the one described above.

  • Tolerances(a) Static test: see (b)(3) – 2.a(1), (2), and (3) of table of FSTD validation tests.(b) Dynamic test: ± 0.9 daN (2 lbs) or ± 10% on dynamic increment above static test.The competent authority should consider alternative means such as the one described above.

  • Dynamic test on the switching thresholds in the input sub-system:The switching thresholds for the detection of the high level are tested cyclically with a high rate.

  • Each vehicle shall meet the injury criteria specified in S21.5 and S23.5, as appropriate, when the pas- senger air bag is deployed in accord- ance with the procedures specified in S28.2.S27.6 Dynamic test requirement (sup- pression of air bag for occupants insidethe ASZ).S27.6.1 Driver.

  • Safety factor test (para 1.3 of Annexure –I), Bend tests (para 2 of Annexure-I), Dynamic test (para 3 of Annexure –I) on brake beams shall be conducted under the supervision of inspecting authority at periodic interval of one year.

  • The T134 Mach and Reynolds numbers are M∞=0.053 and Recref=0.375 million.Table 6- Dynamic test cases for ROLL F-O.

  • Figure 23 Dynamic test 3.2.3. A static separation test shall also be performed.

  • Each vehicle shall meet the injury criteria specified in S21.5 and S23.5, as appropriate, when the pas- senger air bag is deployed in accord- ance with the procedures specified in S28.2.S27.6 Dynamic test requirement (sup- pression of air bag for occupants inside the ASZ).S27.6.1 Driver.

  • Dynamic test on the ability of the input sub-system to switch:The ability of the input sub-system to switch to the low level is tested cyclically on all inputs with the exception of I04—I07, with a high rate.

  • Dynamic test is also underway at the existing WRL and MOL during non-service hours.


More Definitions of Dynamic test

Dynamic test means a test which complies with the requirements of paragraph 3(7);
Sample 1Sample 2
Dynamic test means the test during which lifting machinery is operated in all its possible configurations at the maximum working load multiplied by
Sample 1

Related to Dynamic test

  • Genetic testing means an analysis of genetic markers to exclude or identify a man as the father or a woman as the mother of a child. The term includes an analysis of one or a combination of the following:

  • RDDS test Means one query sent to a particular “IP address” of one of the servers of one of the RDDS services. Queries shall be about existing objects in the Registry System and the responses must contain the corresponding information otherwise the query will be considered unanswered. Queries with an RTT 5 times higher than the corresponding SLR will be considered as unanswered. The possible results to an RDDS test are: a number in milliseconds corresponding to the RTT or undefined/unanswered.

  • Fit test means the use of a protocol to qualitatively or quantitatively evaluate the fit of a respirator on an individual.

  • EPP test Means one EPP command sent to a particular “IP address” for one of the EPP servers. Query and transform commands, with the exception of “create”, shall be about existing objects in the Registry System. The response shall include appropriate data from the Registry System. The possible results to an EPP test are: a number in milliseconds corresponding to the “EPP command RTT” or undefined/unanswered.

  • COVID-19 test means a viral test for SARS-CoV-2 that is:

  • Screening Test means a drug or alcohol test which uses a method of analysis allowed by the Minnesota Drug and Alcohol Testing in the Workplace Act to be used for such purposes.

  • stratigraphic test well means a drilling effort, geologically directed, to obtain information pertaining to a specific geologic condition. Ordinarily, such wells are drilled without the intention of being completed for hydrocarbon production. They include wells for the purpose of core tests and all types of expendable holes related to hydrocarbon exploration. Stratigraphic test wells are classified as (i) "exploratory type" if not drilled into a proved property; or (ii) "development type", if drilled into a proved property. Development type stratigraphic wells are also referred to as "evaluation wells".

  • Penetration Testing means security testing in which assessors mimic real-world attacks to identify methods for circumventing the security features of an application, system, or network. (NIST SP 800-115)

  • DNS test Means one non-­‐recursive DNS query sent to a particular “IP address” (via UDP or TCP). If DNSSEC is offered in the queried DNS zone, for a query to be considered answered, the signatures must be positively verified against a corresponding DS record published in the parent zone or, if the parent is not signed, against a statically configured Trust Anchor. The answer to the query must contain the corresponding information from the Registry System, otherwise the query will be considered unanswered. A query with a “DNS resolution RTT” 5 times higher than the corresponding SLR, will be considered unanswered. The possible results to a DNS test are: a number in milliseconds corresponding to the “DNS resolution RTT” or, undefined/unanswered.

  • Acceptance Test is a test of the Features executed by the Customer to prepare the acceptance.

  • Drug test means a test designed to detect the illegal use of a controlled substance.

  • Drug use test means a scientifically substantiated method to test for the presence of illegal or performance-enhancing drugs or the metabolites thereof in a person’s urine.

  • Performance Test means all operational checks and tests required to determine the performance parameters including inter-alia capacity, efficiency and operating characteristics of the Stores as specified in the Contract.

  • Acceptance Testing mean the tests, reviews and other activities that are performed by or on behalf of Agency to determine whether the Deliverables meet the Acceptance Criteria or otherwise satisfy the Agency, as determined by the Agency in its sole discretion.

  • Acceptance Tests means those tests performed during the Performance Period which are intended to determine compliance of Equipment and Software with the specifications and all other Attachments incorporated herein by reference and to determine the reliability of the Equipment.

  • Cannabis testing facility means an entity registered by

  • Vehicle measuring attitude means the position of the vehicle as defined by the co-ordinates of fiducial marks in the three-dimensional reference system.

  • Commissioning test means tests applied to the Generating Facility, after completion of the construction of the Generating Facility, in order to verify that the Generating Facility may be released for Operation.

  • Percolation test means a subsurface soil test at the depth of a proposed absorption system or similar component of an OWTS to determine the water absorption capability of the soil, the results of which are normally expressed as the rate at which one inch of water is absorbed. The rate is expressed in minutes per inch.

  • Test means such test as is prescribed by the particulars or considered necessary by the Inspecting Officer whether performed or made by the Inspecting Officer or any agency acting under the direction of the Inspecting Officer;

  • B-BBEE status level of contributor means the B-BBEE status of an entity in terms of a code of good practice on black economic empowerment, issued in terms of section 9(1) of the Broad-Based Black Economic Empowerment Act;