Paint removal definition

Paint removal means a method of abatement that permanently eliminates lead-based paint from surfaces.
Sample 1Sample 2Sample 3
Paint removal means a method of abatement that permanently eliminates lead-based paint from surfaces; or surface preparation by stripping, scraping or sanding, as part of paint stabilization, or prior to encapsulation.
Sample 1Sample 2Sample 3
Paint removal means a strategy of abatement which entails stripping lead paint from surfaces.
Sample 1Sample 2Sample 3

Examples of Paint removal in a sentence

  • Paint removal may be accomplished by such methods as scraping, heat treat- ment (infra-red or coil type heat guns) or chemicals.

  • VECTRUS/CEV will inspect all projects involving Lead Based Paint removal and any required documentation must be provided to VECTRUS/ CEV prior to beginning work.

  • Paint removal should be considered only where there is paint surface deterioration and as part of an overall maintenance program which involves repainting or applying other appropriate protective coatings.

  • Paint removal may be accomplished by such methods as scraping, heat treatment (infra-red or coil type heat guns) or chemicals.

  • Due to the dangers of thermal expansion, water washing should be avoided in frosty conditions.Paint Removal from Masonry Paint removal will require planning permission and listed building consent.The restoration of the original surface through the removal of paint can improve the character and appearance of a building.

  • Paint removal waste will be referred to throughout the item text as 'waste'.

  • Paint removal practices that are prohibited by these regulations and HUD regulations, including, but not limited to: open flame/high heat methods to remove paint (e.g., heat guns over 1100°F and torches), power sanders or grinders without HEPA vacuum attachments, abrasive blasting or sand-blasting without HEPA vacuum exhaust, extensive dry scraping or dry sanding, and volatile paint strippers in an unventilated space.

  • A transition is said to be enabled when some preconditions are met (to allow the firing of the transition).

  • Paint removal – Removing dried paint by mechanical, chemical or other methods.

  • Paint removal activities undertaken by contractors during maintenance and refurbishment activities such as by blasting, burning, dry scraping, dry sanding and using power tools creates the most serious danger as the particles are small enough to be inhaled or deposited in furnishings or carpet, making removal extremely difficult.


More Definitions of Paint removal

Paint removal means the separation of the paint from the substrate using heat guns, chemi- cals, or certain contained abrasive measures,
Sample 1Sample 2
Paint removal. Remove all paint to white metal/concrete block/concrete surfaces throughout entire cell. Include all furniture. Provide sand blasting throughout. Where sand blasting is not possible due to protection requirements provide mechanical grinding and fill all grind marks after abatement. Presume all surfaces are painted unless noted otherwise”
Sample 1

Related to Paint removal

  • Paint remover or stripper means any product designed to strip or remove paints or other related coatings, by chemical action, from a substrate without markedly affecting the substrate. “Paint Remover or Stripper” does not include “Multi-purpose Solvent,” paint brush cleaners, products designed and labeled exclusively as “Graffiti Remover,” and hand cleaner products that claim to remove paints and other related coatings from skin.

  • Graffiti remover means a product labeled to remove spray paint, ink, marker, crayon, lipstick, nail polish, or shoe polish, from a variety of noncloth or nonfabric substrates. “Graffiti Remover” does not include “Paint Remover or Stripper,” “Nail Polish Remover,” or “Spot Remover.” Products labeled for dual use as both a paint stripper and graffiti remover are considered “Graffiti Removers.”

  • Emergency removal for purposes of this Policy shall mean removing a respondent from the District’s education program or activity on an emergency basis, provided that the District undertakes an individualized safety and risk analysis, determines that an immediate threat to the physical health or safety of any student or other individual arising from the allegations of sexual harassment justifies removal, and provides the respondent with notice and an opportunity to challenge the decision immediately following the removal. Emergency Removals as permitted by this Policy shall not be construed to modify any rights under the Individuals with Disabilities Education Act, Section 504 of the Rehabilitation Act of 1973, or the Americans with Disabilities Act.

  • Nail polish remover means a product designed to remove nail polish and coatings from fingernails or toenails.

  • Adhesive remover means a product designed to remove adhesive from either a specific substrate or a variety of substrates. “Adhesive Remover” does not include products that remove adhesives intended for use on humans or animals.

  • Legend Removal Date shall have the meaning ascribed to such term in Section 4.1(c).

  • Spot remover means any product labeled to clean localized areas, or remove localized spots or stains on cloth or fabric such as drapes, carpets, upholstery, and clothing, that does not require subsequent laundering to achieve stain removal. Spot remover does not include dry cleaning fluid, laundry pre-wash, or multi-purpose solvent.

  • Removal means a removal for disciplinary reasons from the student’s current educational placement other than a suspension and change in placement to an interim alternative educational setting (IAES) ordered by an impartial hearing officer because the student poses a risk of harm to himself or herself or others.

  • Notice of Removal means a notice, under clause 17.4.5, from an Association to a Nominated Person Removing the Nominated Person.

  • General purpose adhesive remover means a product designed or labeled to remove cyanoacrylate adhesives as well as nonreactive adhesives or residue from a variety of substrates. “General Purpose Adhesive Remover” includes, but is not limited to, products that remove thermoplastic adhesives; pressure sensitive adhesives; dextrine or starch-based adhesives; casein glues; rubber or latex-based adhesives; as well as products that remove stickers; decals; stencils; or similar materials. “General Purpose Adhesive Remover” does not include “Floor or Wall Covering Adhesive Remover.”

  • Loose-fitting facepiece means a respiratory inlet covering that is designed to form a partial seal with the face.

  • Tight-fitting facepiece means a respiratory inlet covering that forms a complete seal with the face.

  • Monthly Minimum Removal Efficiency means the minimum reduction in the pollutant parameter specified when the effluent average monthly concentration for that parameter is compared to the influent average monthly concentration.

  • Standard Installation means the installation of drop cable to a customer’s premise where the distance from the point of entry into the building being served is less than 150 feet from the active cable television system plant.

  • Paint means any pigmented liquid, liquefiable, or mastic composition designed for application to a substrate in a thin layer which is converted to an opaque solid film after application and is used for protection, decoration or identification, or to serve some functional purpose such as the filling or concealing of surface irregularities or the modification of light and heat radiation characteristics.

  • Permitted Installation means the activities and the limits to those activities described in Table 1.1.1 of this Permit.

  • Nuclear installation means any installation of such class or description as may be prescribed by regulations made by the relevant Secretary of State from time to time by statutory instrument, being an installation designed or adapted for:

  • Graffiti shall not include: (1) any sign or banner that is authorized by, and in compliance with, the applicable requirements of the San Francisco Public Works Code, the San Francisco Planning Code or the San Francisco Building Code; or (2) any mural or other painting or marking on the property that is protected as a work of fine art under the California Art Preservation Act (California Civil Code Sections 987 et seq.) or as a work of visual art under the Federal Visual Artists Rights Act of 1990 (17 U.S.C. §§ 101 et seq.). Any failure of Contractor to comply with this section of this Agreement shall constitute an Event of Default of this Agreement.

  • Unauthorized Removal means the Contractor’s removal of Key Personnel without the prior written consent of the State.

  • water installation means the pipes and water fittings which are situated on any premises and ownership thereof vests in the owner thereof and used or intended to be used in connection with the use of water on such premises, and includes a pipe and water fitting situated outside the boundary of the premises, which either connects to the connection pipe relating to such premises or is otherwise laid with the permission of the municipality;

  • Existing installation means an installation, construction of which began prior to the effective date of any regulation having application to it.

  • Painting has the meaning set forth in Section 1.6(a).

  • Replacement Airframe means an Airbus A321 aircraft or a comparable or improved model of Manufacturer (except (a) Engines or engines from time to time installed thereon and any and all Parts related to such Engine or engines and (b) Excluded Equipment), that shall have been made subject to the Lien of the Indenture pursuant to Section 7.05 thereof, together with all Parts relating to such aircraft.

  • Bug and tar remover means a product labeled to remove either or both of the following from painted motor vehicle surfaces without causing damage to the finish:

  • Addition (to an existing building means an extension or increase in the floor area or height of a building or structure.

  • Exterior container means a MIL-STD-129 defined container, bundle, or assembly that is sufficient by reason of material, design, and construction to protect unit packs and intermediate containers and their contents during shipment and storage. It can be a unit pack or a container with a combination of unit packs or intermediate containers. An exterior container may or may not be used as a shipping container.