Design Methodology Sample Clauses

Design Methodology. D3.1.1 Language Concepts Supporting Engineering Scenarios
Sample 1
AutoNDA by SimpleDocs
Design Methodology. This section describes the methodology that it is followed to map efficiently an algorithm to specific hardware technology, as shown in Figure 15. This method is generic in the sense that the steps are technology independent as method, and mapping technology affects aspects of the modeling and not the method itself. The sequence of steps to get from a specification to a working hardware prototype is called a design flow, and each step of the design flow is associated with specific Computer Aided Design (CAD) tools, such as simulators, synthesis tools and place and route tools. Algorithm Analysis Define SW Interface Define HW Interface HW/SW Partitioning HW Design Flow SW Design Flow Model using Hardware Description Language Model using Software Programming Language Integrate Simulate Debug Debug Simulate Co-Simulation Verification Figure 15: Design flow for mapping an algorithm on hardware
Sample 1
Design Methodology. (a) Fujitsu agrees that Ross xxx no obligation under this Agreement to (i) customize or modify the Viper Design Methodology for any design environment other than that for which it was designed by Ross, (xi) provide any documentation for the Viper Design Methodology over and above that which is or was created for Ross' xxternal needs, or (iii) update or support the Viper Design Methodology or any associated documentation in the future. Notwithstanding the preceding sentence, Ross xxxees to provide any new or updated Viper Design Methodology (together with any associated documentation) not previously provided to Fujitsu at the same time it delivers any Deliverable to Fujitsu and to provide a final, complete set of Viper Design Methodology to Fujitsu upon FCS. Following FCS, Ross xxxll have no obligation to provide any Viper Design Methodology to Fujitsu.
Sample 1

Related to Design Methodology

  • Methodology 1. The price at which the Assuming Institution sells or disposes of Qualified Financial Contracts will be deemed to be the fair market value of such contracts, if such sale or disposition occurs at prevailing market rates within a predefined timetable as agreed upon by the Assuming Institution and the Receiver.

  • Service Providing Methodology 1.3.1 Party A and Party B agree that during the term of this Agreement, where necessary, Party B may enter into further service agreements with Party A or any other party designated by Party A, which shall provide the specific contents, manner, personnel, and fees for the specific services.

  • Service Level Standards In addition to all other requirements in this Agreement, and in accordance with the Best Claims Practices & Estimating Guidelines, Vendor shall use reasonable and good faith efforts to meet the Service Level Standards set forth below.

  • Selection of Architect/Construction Drawings Tenant shall retain the architect/space planner designated by Tenant and reasonably approved by Landlord (the “Architect”) to prepare the “Construction Drawings,” as that term is defined in this Section 3.2. Tenant shall retain the engineering consultants selected by Tenant (the “Engineers”) to prepare all plans and engineering working drawings relating to the structural, mechanical, electrical, plumbing, HVAC, life safety, and sprinkler work in the Premises, which work is not part of the Base Building. The plans and drawings to be prepared by Architect and the Engineers hereunder shall be known collectively as the “Construction Drawings.” All Construction Drawings shall comply with the drawing format and specifications reasonably determined by Landlord, and shall be subject to Landlord’s approval. Tenant and Architect shall verify, in the field, the dimensions and conditions as shown on the relevant portions of the base building plans, and Tenant and Architect shall be solely responsible for the same, and Landlord shall have no responsibility in connection therewith. Landlord’s review of the Construction Drawings as set forth in this Section 3, shall be for its sole purpose and shall not imply Landlord’s review of the same, or obligate Landlord to review the same, for quality, design, Code compliance or other like matters. Accordingly, notwithstanding that any Construction Drawings are reviewed by Landlord or its space planner, architect, engineers and consultants, and notwithstanding any advice or assistance which may be rendered to Tenant by Landlord or Landlord’s space planner, architect, engineers, and consultants, Landlord shall have no liability whatsoever in connection therewith and shall not be responsible for any omissions or errors contained in the Construction Drawings, and Tenant’s waiver and indemnity set forth in the Lease shall specifically apply to the Construction Drawings.

  • Underwriting Methodology The methodology used in underwriting the extension of credit for each Mortgage Loan employs objective mathematical principles which relate the related Mortgagor's income, assets and liabilities to the proposed payment and such underwriting methodology does not rely on the extent of the related Mortgagor's equity in the collateral as the principal determining factor in approving such credit extension. Such underwriting methodology confirmed that at the time of origination (application/approval) the related Mortgagor had a reasonable ability to make timely payments on the Mortgage Loan;

  • Benchmarking 19.1 The Parties shall comply with the provisions of Framework Schedule 12 (Continuous Improvement and Benchmarking) in relation to the benchmarking of any or all of the Goods and/or Services.

  • Approved Working Drawings The Final Working Drawings shall be approved by Landlord (the “Approved Working Drawings”) prior to the commencement of construction of the Premises by Tenant. After approval by Landlord of the Final Working Drawings, Tenant may submit the same to the appropriate municipal authorities for all applicable building permits. Tenant hereby agrees that neither Landlord nor Landlord’s consultants shall be responsible for obtaining any building permit or certificate of occupancy for the Premises and that obtaining the same shall be Tenant’s responsibility; provided, however, that Landlord shall cooperate with Tenant in executing permit applications and performing other ministerial acts reasonably necessary to enable Tenant to obtain any such permit or certificate of occupancy. No changes, modifications or alterations in the Approved Working Drawings may be made without the prior written consent of Landlord, which consent may not be unreasonably withheld.

  • Selection Criteria Each Contract is secured by a new or used Motorcycle. No Contract has a Contract Rate less than 1.00%. Each Contract amortizes the amount financed over an original term no greater than 84 months (excluding periods of deferral of first payment). Each Contract has a Principal Balance of at least $500.00 as of the Cutoff Date.

  • Financial testing The financial covenants set out in Clause 20.2 (Financial condition) shall be tested by reference to each of the financial statements and/or each Compliance Certificate delivered pursuant to Clause 19.2 (Compliance Certificate).

  • Allocation Method The Plan Administrator will allocate a Plan-Designated QNEC using the following method (Choose one of a., b., c., or d.):

Draft better contracts in just 5 minutes Get the weekly Law Insider newsletter packed with expert videos, webinars, ebooks, and more!