DOORS, FRAMES AND HARDWARE. SINGLE CORRIDOR DOOR AND HARDWARE
DOORS, FRAMES AND HARDWARE. Corridor Doors and Frames (Entrance to Suite)
DOORS, FRAMES AND HARDWARE. A) Interior Office Doors
DOORS, FRAMES AND HARDWARE. All base building doors, frames and hardware are part of the shell construction. Typical units consist of painted hollow metal frame with 3’ x 8’ stain grade wood door with ADA lever handle.
DOORS, FRAMES AND HARDWARE. 1. One (1) door per twenty-five (25) lineal feet of interior partition allowance.
2. Interior doors shall be 3'0" wide by 7'0" high and 1-3/4" thick, solid core door with frame, prefinished, with a standard Mendecino Oak finish, both sides.
3. Interior door hardware will include lever-handled latch sets, 0-0/0" xxxx xx 0-0/0" xxxxx, xxxxx stop and three (3) silencers.
4. Hardware finish to be Schlage Brushed Aluminum or equal.
DOORS, FRAMES AND HARDWARE. A. Main entrance shall be a pair of glass Herculite doors.
B. All interior partition doors will be 6'-8" in height by 1-3/4" in thickness, stain grade wood solid core, birch veneer with stain or clear urethane finish and width of 3'-0", and shall have lever handle passage latchsets and templated butt hinges.
C. All door bucks are to be aluminum or steel knockdown type. All jointed heads on knockdown door bucks to be flush type.
D. Landlord shall supply, in addition to exterior doors, up to three locksets on interior office doors. All keying shall conform to Landlord's master keying system.
DOORS, FRAMES AND HARDWARE. A. All doors are priced as building standard.
DOORS, FRAMES AND HARDWARE. (a) Single swing 6' - 8" x 3' - 0", paint grade, pre-hung hollow core wood doors and wood frames shall be provided assuming 35% open office space, or approximately 1 door per 300 square feet of office space. Finish will be two (2) coats of semi-gloss paint, as selected by Tenant from Building-standard, one (1) coat throughout.
(b) One (1) 6' - 8" x 3' - 0", paint grade wood, pre-hung solid core door with wood frame shall be provided from office to warehouse.
(c) Hardware included shall be a satin finish stainless steel lever passage set (not lockable), one pair of standard steel butt hinges, and a floor mounted standard steel door stop for every standard interior door. Locksets are not provided as a standard.
DOORS, FRAMES AND HARDWARE. A. Metal doors shall be provided at service core and mechanical rooms. They will be flush type 3’x8’xl-3/4” with stained hardwood finish at rooms with guest access (toilet rooms) and painted hollow metal at service rooms (electrical closets, mechanical rooms, etc.) in accordance with fire resistive requirements for each opening.
B. Exterior service doors will be painted hollow metal 3’ x 7’ x 1 3/4” in a painted hollow metal frame. At storefront and curtainwall locations, aluminum doors with glazing will be provided by the Landlord.
C. Interior Fire Exit Stair doors will be 3’ x 8’ x 1 3/4” and will include a vision panel in the door.
D. Frames - All base building doors, except storefront doors, shall be installed and painted. Hollow metal door frame and door colors to be approved by Tenant.
E. Hardware - Base building doors shall have mortise-bodied levers with keyed locksets and closers.
F. Hardware sets shall be Schlage, Xxxxxxx or approved equal.
G. Hardware shall be a brushed aluminum or brushed chrome finish.
DOORS, FRAMES AND HARDWARE. 2.1 Standard Entry/Corridor
2.1.1 Door 3' - 5/8" (6' - 0") x 8'0", 20-minute-rated, solid core door. Door finish to be plastic laminate-Color to be selected by WDG.
2.1.2 Frame 3' - 5/8" (or 6' - 0") x 8'0". Alumax Eagle Series, Brushed Aluminum.
