RE-WEIGHING PRODUCT Deliveries are subject to re- weighing at the point of destination by the Authorized User. If shrinkage occurs which exceeds that normally allowable in the trade, the Authorized User shall have the option to require delivery of the difference in quantity or to reduce the payment accordingly. Such option shall be exercised in writing by the Authorized User.
Research Collaboration 3.7.1 Aarvik shall carry out the activities of each Work Item and deliver the required Data Package and/or deliverables in accordance with the applicable SOW. Without limiting the generality of the foregoing, Aarvik shall, in accordance with the applicable SOWs and the timeline approved by JRC, apply the Aarvik IP to (i) design and synthesize Collaboration Compounds, and (ii) by itself or through subcontractor(s), [***]. During the Research Term, if any Party identifies any Third Party Patent or Know-How that is necessary or reasonably useful for any activity under the SOWs but has not been included in the Aarvik IP, then such Party shall immediately inform the other Party and the Parties shall discuss in good faith the need of obtaining a license from such Third Party.
3.7.2 No later than [***] ([***]) days after completion of the [***], Aarvik shall, to the extent not already provided to ArriVent, deliver the Data Packages and all other deliverables required under the [***], as well as the results of the Patentability and FTO Analysis as described in Section 3.2.3, to ArriVent. ArriVent shall have the sole discretion to decide whether or not to advance any Collaboration Compound and which Collaboration Compound(s) will be advanced for further studies beyond the [***]. ArriVent shall inform Axxxxx of its decision in writing. If AxxxXxxx decides to advance the Collaboration Program to [***], ArriVent shall make the payment for the [***] pursuant to Section 6.2.1.
3.7.3 If, upon completion of the [***] for the Collaboration Program, AxxxXxxx decides not to advance the Collaboration Program to [***], ArriVent may terminate the Collaboration Program. If AxxxXxxx decides to advance the Collaboration Program to [***], ArriVent shall make the payment for the [***] pursuant to Section 6.2.1.
3.7.4 No later than [***] ([***]) days after completion of the [***], Aarvik shall, to the extent not already provided to ArriVent, deliver all Data Packages and deliverables required under the [***] to ArriVent. ArriVent shall have the sole discretion to decide whether or not to advance any Collaboration Compound and which Collaboration Compound(s) will be advanced for further studies beyond the [***]. ArriVent shall inform Axxxxx of its decision in writing.
3.7.5 No later than [***] ([***]) days after completion of the [***], Aarvik shall, to the extent not already provided to ArriVent, deliver all Data Packages and deliverables required under the [***] to ArriVent.
3.7.6 Within [***] ([***]) days after completion of the [***], Aarvik shall deliver to ArriVent a full report on all key results and findings of the Collaboration Program, and such other data, results and information as ArriVent may deem necessary for it to determine whether or not to exercise the Option (the “Full Report”).
For clarity the time allowances provided in clause 2.10 shall operate to reduce the maximum timetabled classroom teaching time specified in clause 4.2 of this agreement.
License Period a. The License is hereby granted in favour of the Licensee for a total period of 15 (fifteen) years from the Commencement Date subject to unless otherwise terminated by Maha-Metro or surrendered by the Successful Bidder/Licensee, in term of provisions of License Agreement.
b. The tenure of License Agreement shall commence from the date of handing over of the property business space.
c. Tenure of the License Period of any additional space handed over subsequently shall be co- terminus with above period irrespective of date of actual handing over for such additional space.
d. There shall be a lock in period of five (05) years from the date of commencement of agreement/ handing over of licensed space.
e. Licensee shall have option to exit from the License Agreement immediately after completion of lock in period of 5 (Five) years. For it, Licensee shall have to issue 180 days prior notice to Maha-Metro. Such prior notice intimation can be given after four and half (4 ½) years however option to exit will be available only after five (05) years.
f. At no time during the license tenure, the Licensee shall be allowed to surrender partial Licensed Space which has been handed over to the Licensee by Maha-Metro.
g. At the end of License period or in the event of termination of this agreement prior to completion of license tenure, for any reason whatsoever, all rights given under this License Agreement shall cease to have effect and the premises shall revert to Maha-Metro, without any obligation to Maha-Metro to pay or adjust any consideration or other payment to the Licensee.
h. The tenure shall be inclusive of fitment period as applicable for the tendered space.
i. On completion/ termination of License Agreement, the Licensee shall hand over the space with normal wear & tear. The Licensee shall be allowed to remove its assets like temporary structure, furniture, almirahs, air-conditioners, DG sets, equipments, etc. without causing damage to the existing structure. However, the Licensee shall not be allowed to remove any facility, equipment, fixture, etc. which has become an integral part of the development plan of the space.
j. At the end of the License Period or sooner determination of this Agreement for any reason whatsoever all rights given under this License Agreement shall cease to have effect and the Licensed Area with all the furniture and fixtures and other assets permanently attached to the Licensed Area shall revert to Maha-Metro without any obligation on part of Maha-Metro to pay or adjust any consideration or other payment to the Licensee. The Licensee voluntarily gives Maha-Metro the right to seal the said Licensed Space(s) and remarket the same as part on its discretion upon Termination of this Agreement. No claim, compensation or damages will be entertained by Maha-Metro on this account.
Manufacturing Technology Transfer Upon AbbVie’s written request with respect to a given Collaboration CAR-T Product and Licensed Product, Caribou shall effect a full transfer to AbbVie or its designee (which designee may be an Affiliate or a Third Party Provider) of all Materials and Know-How Controlled by Caribou relating to the then-current process for the Manufacture of such Collaboration CAR-T Product and any corresponding Licensed Products (each, a “Manufacturing Process”). Caribou shall provide, shall cause its Affiliates to provide, and shall use Commercially Reasonable Efforts to assist AbbVie in causing all Third Party Providers to provide, all reasonable assistance requested by AbbVie to enable AbbVie (or its Affiliate or designated Third Party Provider, as applicable) to implement each Manufacturing Process at the facilities designated by AbbVie. If requested by AbbVie, such assistance shall include facilitating the entering into of agreements with applicable Third Party suppliers relating to such Collaboration CAR-T Product and any corresponding Licensed Products. Without limitation of the foregoing, in connection with the Manufacturing Process and related transfer:
(a) Caribou shall, and shall cause its Affiliates to, make available to AbbVie (or its Affiliate or designated Third Party Provider, as applicable), and shall use Commercially Reasonable Efforts to assist AbbVie in causing all Third Party Providers to make available to AbbVie, from time to time as AbbVie may request, all Materials and Manufacturing-related Know-How Controlled by Caribou relating to each Manufacturing Process, including methods, reagents and processes and testing/characterization Know-How, and all documentation constituting material support, performance advice, shop practice, standard operating procedures, specifications as to Materials to be used, and control methods, that are necessary or reasonably useful to enable AbbVie (or its Affiliate or designated Third Party manufacturer, as applicable) to use and practice such Manufacturing Process;
(b) Caribou shall cause all appropriate employees and representatives of Caribou and its Affiliates, and shall use Commercially Reasonable Efforts to assist AbbVie in causing all appropriate employees and representatives of Third Party Providers, to meet with employees or representatives of AbbVie (or its Affiliate or designated Third Party Provider, as applicable) at the applicable manufacturing facility at mutually convenient times to assist with the working up and use of each Manufacturing Process and with the training of the personnel of AbbVie (or its Affiliate or designated Third Party Provider, as applicable) to the extent necessary or reasonably useful to enable AbbVie (or its Affiliate or designated Third Party Provider, as applicable) to use and practice such Manufacturing Process;
(c) Without limiting the generality of this Section 4.4.2, Caribou shall cause all appropriate analytical and quality control laboratory employees and representatives of Caribou and its Affiliates, and shall use Commercially Reasonable Efforts to assist AbbVie in causing all appropriate analytical and quality control laboratory employees and representatives of Third Party Providers, to meet with employees or representatives of AbbVie (or its Affiliate or designated Third Party Provider, as applicable) at the applicable manufacturing facility and make available all necessary equipment, at mutually convenient times, to support and execute the provision of all applicable analytical methods and the validation thereof (including all applicable Know-How, Information and Materials Controlled by Caribou, and sufficient supplies of all primary and other reference standards);
(d) Caribou shall, and shall cause its Affiliates to, take such steps, and shall use Commercially Reasonable Efforts to assist AbbVie in causing Third Party Providers take such steps, as are necessary or reasonably useful to assist AbbVie (or its Affiliate or designated Third Party Provider, as applicable) in obtaining any necessary licenses, permits or approvals from Regulatory Authorities with respect to the Manufacture of the applicable Collaboration CAR-T Products and corresponding Licensed Products at the applicable facilities; and
(e) Caribou shall, and shall cause its Affiliates to, provide, and shall use Commercially Reasonable Efforts to assist AbbVie in causing Third Party Providers to provide, such other assistance as AbbVie (or its Affiliate or designated Third Party Provider, as applicable) may reasonably request to enable AbbVie (or its Affiliate or designated Third Party Provider, as applicable) to use and practice each Manufacturing Process and otherwise to Manufacture the applicable Collaboration CAR-T Products and corresponding Licensed Products.
Licensed Product The term “Licensed Product” shall mean any product (a) the manufacture, use, importation, sale or offer for sale of which would, in the absence of the license granted by this Agreement, infringe a Valid Claim of any of the Licensed Patent Rights, or (b) that is comprised of, utilizes or incorporates Licensed Biological Materials, or (c) that is discovered, developed or made using a Licensed Process.
Commercialization License Subject to the terms of this Agreement, including without limitation Section 2.2 and Theravance's Co-Promotion rights in Section 5.3.2, Theravance hereby grants to GSK, and GSK accepts, an exclusive license under the Theravance Patents and Theravance Know-How to make, have made, use, sell, offer for sale and import Alliance Products in the Territory.
Competing Products The provisions of Section 21 are set forth on attached Exhibit H and are incorporated in this Section 21 by this reference.
Joint Patent Rights If not already established under the Research Collaboration Agreement, prior to either Party filing any Patent Right disclosing Joint Program Technology or Joint Probody Platform Improvements, the Parties shall establish a patent committee (the “Patent Committee”) comprised of at least one (1) representative of each Party for the purpose of facilitating the preparation, filing, prosecution, maintenance and defense of Joint Patent Rights. As agreed upon by the Parties, meetings of the Patent Committee may be face-to-face or may be conducted by teleconferences or videoconferences, from time to time as needed. The Patent Committee will be the forum through which the Parties coordinate their respective obligations to each other described in Sections 5.2.2 and 5.2.3 hereof and in this Section. In the event the Parties conceive or generate any Joint Program Technology or Joint Probody Platform Improvements, the Parties shall promptly meet to discuss and determine, based on mutual consent, whether to seek patent protection thereon, which Party will control filing, prosecution and maintenance of such patents and how to pay for the filing, prosecution and maintenance of such patents. It is presumed that ImmunoGen will control filing, prosecution and maintenance of Joint Patent Rights claiming Joint Program Technology or Joint Conjugation Probody Platform Improvements, and that CytomX will control filing, prosecution and maintenance of Joint Patent Rights claiming Joint Unconjugated Probody Platform Improvements. Neither Party will file any Joint Patent Right without the prior written consent of the other Party, which consent shall not be unreasonably withheld, conditioned or delayed. The Party controlling filing and prosecution of any such Joint Patent Right (a) shall keep the other Party informed regarding each Patent Right, (b) shall consider in good faith any recommendations made by the other Party in regard to the filing, prosecution or maintenance of any such Patent Right and (c) shall not unreasonably refuse to incorporate any recommendations made by the other Party in regard to such filing, prosecution or maintenance.
Clinical Trials The studies, tests and preclinical and clinical trials conducted by or on behalf of, or sponsored by, the Company, or in which the Company has participated, that are described in the Registration Statement, the Time of Sale Disclosure Package or the Prospectus, or the results of which are referred to in the Registration Statement, the Time of Sale Disclosure Package or the Prospectus, were and, if still pending, are being conducted in all material respects in accordance with protocols, procedures and controls pursuant to, where applicable, accepted professional and scientific standards for products or product candidates comparable to those being developed by the Company and all applicable statutes, rules and regulations of the FDA, the EMEA, Health Canada and other comparable drug and medical device (including diagnostic product) regulatory agencies outside of the United States to which they are subject; the descriptions of the results of such studies, tests and trials contained in the Registration Statement, the Time of Sale Disclosure Package or the Prospectus do not contain any misstatement of a material fact or omit a material fact necessary to make such statements not misleading; the Company has no knowledge of any studies, tests or trials not described in the Disclosure Package and the Prospectus the results of which reasonably call into question in any material respect the results of the studies, tests and trials described in the Registration Statement, the Time of Sale Disclosure Package or Prospectus; and the Company has not received any notices or other correspondence from the FDA, EMEA, Health Canada or any other foreign, state or local governmental body exercising comparable authority or any Institutional Review Board or comparable authority requiring or threatening the termination, suspension or material modification of any studies, tests or preclinical or clinical trials conducted by or on behalf of, or sponsored by, the Company or in which the Company has participated, and, to the Company’s knowledge, there are no reasonable grounds for the same. Except as disclosed in the Registration Statement, the Time of Sale Disclosure Package and the Prospectus, there has not been any violation of law or regulation by the Company in its respective product development efforts, submissions or reports to any regulatory authority that could reasonably be expected to require investigation, corrective action or enforcement action.
