Fire Sprinkler Sample Clauses

Fire Sprinkler. Provide separate zoned system as best suited for this size and type of building.

Fire Sprinkler. A temporary sprinkler loop, hydraulically sized for a ”Light Hazard” density, shall be installed at an elevation above the concrete slab of approximately 9’- 6”, serving approximately 225 sq ft per head, with brass upright pendant-type heads, or as otherwise required by applicable code. Piping mains, branches, and drops shall be static pressure tested. Temporary sprinkler piping and heads shall be furnished and installed by Landlord. The eventual removal of the temporary sprinkler loop and replacement with Tenant’s sprinkler piping and permanent heads, in its entirety and designed in full accordance with applicable codes and reference standards, shall be performed by Tenant at its’ sole cost and expense. Landlord shall provide two (2) combined fire standpipes, with two (2) OS&Y zone valves located at each standpipe in two (2) of the three (3) the fire stairs on each of Tenant’s floors, complete with flow and tamper monitoring, for Tenant’s connection of its loop and branch piping.

Fire Sprinkler. (a) Reliable, semi-recessed chrome heads with electrostatically painted escutcheons to match ceiling tile. Install centerline of ceiling tiles. No heads are to be installed within 2’-0” of the nearest wall.

Fire Sprinkler a. Drops and heads from existing distribution. b. Adjustable heads. c. Semi-recessed heads with white enamel trim. Located in center of ceiling tile, except per code requirements.

Fire Sprinkler a) Drop heads from existing distribution, to be located in center of ceiling tile. b) Adjustable heads. c) Semi-recessed head model ‘H’ 2” orifice with white enamel trim. d) Record Designer: Design-Build by incumbent contractor.

Fire Sprinkler. A complete, unpainted, automatic fire protection sprinkler system for light hazard protection will be provided for the building in accordance with the written requirements of the Fire ▇▇▇▇▇▇▇▇, NFPA and other applicable codes. All piping, standpipes, valves and specialties will be provided for a complete system to meet code compliance in shell condition. The sprinkler system will contain a flow alarm connected to a fire alarm panel for remote alarm monitoring. Heads will be installed in upright position as part of shell condition delivery.

Fire Sprinkler. 2.3.1. Install 2 FIFR sprinkler heads.

Fire Sprinkler. A. DROPS AND HEAD FROM EXISTING DISTRIBUTION. B. ADJUSTABLE HEADS. C. SEMI-RECESSED HEADS MODE “H-2” ORIFICE WITH WHITE ENAMEL TRIM, BY CENTRAL SPRINKLER CORPORATION. LOCATED IN CENTER OF CEILING TILE (EXCEPT AS CODE REQUIRED NEAR SOFFIT). ALLOWANCE: ONE (1) PER 125 SQUARE FEET OF USABLE AREA.

Fire Sprinkler a. The facility shall be provided with an ESFR Class IV fire protection sprinkler system. The system shall be installed in compliance with Texas State Board of Insurance requirements. The service line shall be sized to provide adequate volumes and pressures. The system shall include all water mains, connections and meter requirements. Any additions or modifications to this system shall be made a part of the tenant improvements or as job extra.