Independent lamps. If different types of lamps complying with the requirements of several Regulations, uses the same outer lens having the same or different colour, a single international approval mark may be axxxxxx, consisting of a circle surrounding the letter "E" followed by the distinguishing number of the country which has granted the approval, and an approval number. This approval mark may be lxxxxxx xnywhere on the lamp, provided that:
4.5.1. It is visible after their installation.
4.5.2. The identification symbol for each lamp appropriate to each Regulation under which approval has been granted, together with the corresponding series of amendments incorporating the most recent major technical amendments to the Regulation at the time of issue of the approval and if necessary, the required arrow shall be marked.
4.5.3. The size of the components of a single approval mark shall not be less than the minimum size required for the smallest of the individual marks under which approval has been granted.
4.5.4. The main body of the lamp shall include the space described in paragraph 3.3. above and shall bear the approval mark of the actual function(s).
4.5.5. Model E in Annex 2 to this Regulation gives examples of an approval mark with the above-mentioned additional symbols.
Independent lamps. Annex 4, Figures 1 to 9, to this Regulation gives examples of arrangements of the approval xxxx with the above-mentioned additional symbols.
Independent lamps. If different types of lamps complying with the requirements of several Regulations, use the same outer lens having the same or different colour, a single international approval xxxx xxx be affixed, consisting of a circle surrounding the letter "E" followed by the distinguishing number of the country which has granted the 29 for Xxxxxxx, 00 (xxxxxx), 00 xxx Xxxxxx xxx Xxxxxxxxxxx, 32 for Latvia, 33 (vacant), 34 for Bulgaria, 35 (vacant), 36 for Lithuania, 37 for Turkey, 38 (vacant), 39 for Azerbaijan, 40 for The former Yugoslav Republic of Macedonia, 41 (vacant), 42 for the European Community (Approvals are granted by its Member States using their respective ECE symbol), 43 for Japan, 44 (vacant), 45 for Australia, 46 for Xxxxxxx, 00 for South Africa, 48 for New Zealand, 49 for Cyprus, 50 for Malta, 51 for the Republic of Korea, 52 for Malaysia, 53 for Thailand, 54 and 55 (vacant), 56 for Montenegro, 57 (vacant) and 58 for Tunisia. Subsequent numbers shall be assigned to other countries in the chronological order in which they ratify or accede to the Agreement Concerning the Adoption of Uniform Technical Prescriptions for Wheeled Vehicles, Equipment and Parts which can be Fitted and/or be Used on Wheeled Vehicles and the Conditions for Reciprocal Recognition of Approvals Granted on the Basis of these Prescriptions, and the numbers thus assigned shall be communicated by the Secretary-General of the United Nations to the Contracting Parties to the Agreement. approval, and an approval number. This approval xxxx xxx be located anywhere on the lamp, provided that :
4.4.1. It is visible after their installation.
4.4.2. The identification symbol for each lamp appropriate to each Regulation under which approval has been granted, together with the corresponding series of amendments incorporating the most recent major technical amendments to the Regulation at the time of issue of the approval and if necessary, the required arrow shall be marked.
4.4.3. The size of the components of a single approval xxxx shall not be less than the minimum size required for the smallest of the individual marks under which approval has been granted.
4.4.4. The main body of the lamp shall include the space described in paragraph 3.4. above and shall bear the approval xxxx of the actual function(s).
4.4.5. Model E in Annex 2 to this Regulation gives examples of an approval xxxx with the above-mentioned additional symbols.
Independent lamps. Annex 3, Figure 1, to this Regulation gives an example of arrangement of the approval mark with the above-mentioned additional symbols. If different types of lamps complying with the requirements of several Regulations, use the same outer lens having the same or different colour, a single international approval xxxx xxx be affixed, consisting of a circle surrounding the letter "E" followed by the distinguishing number of the country which has granted the approval, and an approval number. This approval xxxx xxx be located anywhere on the lamp, provided that:
4.3.1.1. It is visible after their installation.
4.3.1.2. The identification symbol for each lamp appropriate to each Regulation under which approval has been granted, together with the corresponding series of amendments incorporating the most recent major technical amendments to the Regulation at the time of issue of the approval and if necessary, the required arrow shall be marked.
4.3.1.3. The size of the components of a single approval mark shall not be less than the minimum size required for the smallest of the individual marks under which approval has been granted.
4.3.1.4. The main body of the lamp shall include the space described in paragraph 3.3. above and shall bear the approval mark of the actual function(s).
4.3.1.5. Figure 4 in Annex 3 to this Regulation gives examples of an approval mark with the above-mentioned additional symbols.
Independent lamps. Annex 2, Figure 1, to this Regulation gives an example of arrangement of the approval xxxx with the above-mentioned additional symbols.
2/ 1 for Germany, 2 for France, 3 for Italy, 4 for the Netherlands, 5 for Sweden, 6 for Belgium, 7 for Hungary, 8 for the Czech Republic, 9 for Spain, 10 for Serbia, 11 for the United Kingdom, 12 for Xxxxxxx, 00 for Luxembourg, 14 for Xxxxxxxxxxx, 00 (xxxxxx), 16 for Norway, 17 for Finland, 18 for Denmark, 19 for Romania, 20 for Poland, 21 for Portugal, 22 for the Russian Federation, 23 for Greece, 24 for Xxxxxxx, 00 for Xxxxxxx, 00 for Slovenia, 27 for Xxxxxxxx, 00 for Belarus, 29 for Xxxxxxx, 00 (xxxxxx), 00 xxx Xxxxxx xxx Xxxxxxxxxxx, 32 for Latvia, 33 (vacant), 34 for Bulgaria, 35 (vacant), 36 for Lithuania, 37 for Turkey, 38 (vacant), 39 for Azerbaijan, 40 for The former Yugoslav Republic of Macedonia, 41 (vacant), 42 for the European Community (Approvals are granted by its Member States using their respective ECE symbol), 43 for Japan, 44 (vacant), 45 for Australia, 46 for Xxxxxxx, 00 for South Africa, 48 for New Zealand, 49 for Cyprus, 50 for Malta, 51 for the Republic of Korea, 52 for Malaysia, 53 for Thailand, 54 and 55 (vacant), 56 for Montenegro, 57 (vacant) and 58 for Tunisia. Subsequent numbers shall be assigned to other countries in the chronological order in which they ratify or accede to the Agreement Concerning the Adoption of Uniform Technical Prescriptions for Wheeled Vehicles, Equipment and Parts which can be Fitted and/or be Used on Wheeled Vehicles and the Conditions for Reciprocal Recognition of Approvals Granted on the Basis of these Prescriptions, and the numbers thus assigned shall be communicated by the Secretary- General of the United Nations to the Contracting Parties to the Agreement.
Independent lamps. Annex 3, figures 1 to 9, gives examples of arrangements of the approval marks with the above-mentioned additional symbols.
Independent lamps. Annex 1 of the pertinent Regulation gives a simple example of arrangement of the approval xxxx with the above-mentioned additional symbols. For exact (further) marking to be inserted into the generic scheme of Annex 1 of Part II to this Regulation (Horizontal Reference Document (HRD)) see Annex y, Figure 1, of each Regulation pertaining to individual devices If different types of lamps complying with the requirements of several Regulations, use the same outer lens having the same or different colour, a single international approval xxxx xxx be affixed, consisting of a circle surrounding the letter “E” followed by the distinguishing number of the country which has granted the approval, and an approval number. This approval xxxx xxx be located anywhere on the lamp, provided that:
5.3.1.1 It is visible after their installation (see paragraph 5.4);
5.3.1.2 The identification symbol for each lamp appropriate to each Regulation under which approval has been granted, together with the corresponding series of amendments incorporating the most recent major technical amendments to the Regulation at the time of issue of the approval and if necessary, the required arrow, shall be marked;
5.3.1.3 The size of the components of a single approval xxxx shall not be less than the minimum size required for the smallest of the individual marks under which approval has been granted;
5.3.1.4 The main body of the lamp shall include the space described in paragraph 4.3, above, and shall bear the approval xxxx of the actual function(s);
5.3.1.5 Point 4 in Annex 1 of Part II to this Regulation (Horizontal Reference Document (HRD)) gives examples of an approval xxxx with the above-mentioned additional symbols.
