INSPECTIONS AND SAMPLES Sample Clauses

INSPECTIONS AND SAMPLES. Should ITT Sheraton have reason to believe based on information available to it that the quality standards referred to in Section 2.06 have not been maintained, at the request of ITT Sheraton, ITT World Directories shall, and shall cause the Information Services Subsidiaries to, permit a knowledgeable independent expert or consultant retained by ITT Sheraton to have reasonable access to their premises and personnel during normal working hours and shall furnish or permit inspection of, at ITT Sheraton's request and without charge to ITT Sheraton or to such expert or consultant, product samples, cartons, containers, packaging, wrapping and service materials bearing or used in connection with the ITT Name and/or the ITT Marks for the purpose of ensuring that ITT World Directories and the Information Services Subsidiaries are complying with such quality standards. The selection of the independent expert shall be subject to the approval of ITT World Directories, which approval shall not be unreasonably delayed or withheld. Any information obtained during such inspection and provided to ITT Sheraton shall be limited to that which is necessary to ensure compliance with such quality standards and shall be kept confidential by ITT Sheraton and its Subsidiaries.
Sample 1
AutoNDA by SimpleDocs
INSPECTIONS AND SAMPLES. Licensee agrees that Licensor or its duly authorized agent (PROVIDED THAT Licensor or such agent shall have executed a confidentiality agreement reasonably satisfactory to Licensee) shall have the right, on an annual basis at a time to be agreed upon by Licensor and Licensee, to inspect the manufacturing process utilized to produce the Products under this Agreement to ensure compliance with the quality standards set forth herein. The inspection shall be limited to those areas of the facilities where the Products are manufactured, and the Licensor agrees to such restrictions on such inspections as may be required under the Licensee's contractual arrangements with third parties. During such inspections, (i) review may be made of quality control and manufacturing reports as may be reasonably requested, (ii) Licensor or its duly authorized agent may take a reasonable number of representative samples of the Products for quality audit purposes, and (iii) Licensor or its duly authorized agent may review representative samples of promotional, marketing and point-of-sale materials for the Products illustrating Licensee's use of the Trademarks.
Sample 1
INSPECTIONS AND SAMPLES. Licensor shall have the right to exercise quality control over the Licensee's and its Affiliates' use of the Licensed Marks on or in connection with the Licensed Products to the extent reasonably necessary or advisable under applicable Law to maintain the validity of the Licensed Marks or to protect the goodwill associated therewith. In furtherance of the foregoing, subject to Section 4.2: (a) The Licensee shall permit representatives of the Licensor to inspect the Licensee's and its Affiliates' facilities upon reasonable prior written notice (at least one (1) day in advance) and during regular business hours; and (b) prior to any use of any Licensed Marks in connection with a Licensed Product which has not previously been approved or is not substantially consistent with a previously approved use, Licensee shall deliver to Licensor a representative sample of the Licensed Product and the packaging, labeling, promotional, advertising, or other materials bearing the Licensed Marks to Licensor for its approval, which approval shall not be unreasonably withheld, conditioned or delayed.
Sample 1
INSPECTIONS AND SAMPLES. Should Licensor have reason to believe based on information available to it that the quality standards referred to in Section 2.07 have not been maintained then, at the request of Licensor, ITT Hartford and the ITT Hartford Sublicensees shall permit a knowledgeable independent expert or consultant specifically retained by Licensor to have reasonable access to their premises and personnel during normal working hours and shall furnish or permit inspection of, at Licensor's request and without charge to Licensor or to such expert or consultant, product samples, cartons, containers, packaging, wrapping and service materials bearing or used in connection with the ITT Name and/or the
Sample 1
INSPECTIONS AND SAMPLES. Should Licensor have reason to believe based on information available to it that the quality standards referred to in Section 2.07 have not been maintained then, at the request of Licensor, ITT Hartford and the ITT Hartford Sublicensees shall permit a knowledgeable independent expert or consultant specifically retained by Licensor to have reasonable access to their premises and personnel during normal working hours and shall furnish or permit inspection of, at Licensor's request and without charge to Licensor or to such expert or consultant, product samples, cartons, containers, packaging, wrapping and service materials bearing or used in connection with the ITT Name and/or the ITT Marks for the purpose of ensuring that ITT Hartford and the ITT Hartford Sublicensees are complying with such quality standards. Any information obtained during such inspection and provided to Licensor shall be limited to that which is necessary to ensure compliance with such quality standards.
Sample 1
INSPECTIONS AND SAMPLES. 4.1. Licensor shall have the right to exercise quality control over Licensee’s and its Affiliates’ use of the Licensed Marks on or in connection with the Licensed Products to the extent reasonably necessary under applicable Law to maintain the validity of the Licensed Marks and protect the goodwill associated therewith. In furtherance of the foregoing, subject to Section 4.2, prior to any use of any Licensed Mark which has not previously been approved or is not substantially consistent with a previously approved use, Licensee shall deliver to Licensor a representative sample of the Licensed Product or the packaging, labeling, promotional, advertising, or other materials bearing the Licensed Mark to Licensor for its approval, which approval shall not be unreasonably withheld, conditioned, or delayed. 4.2. In the event that Licensor has any objection to any practices of Licensee following an inspection, or to any sample provided, Licensor shall provide written notice to Licensee of such objection in reasonable detail to facilitate cure by Licensee. If Licensee has not received written notice of any objection within five (5) business days following Licensor’s receipt of the sample, as applicable, Licensor shall be deemed to have approved such use of the Licensed Marks, as applicable. Approval of any particular use of any Licensed Mark, once given by Licensor, shall continue in effect with respect to such use, and any use substantially consistent therewith, without need for further approval, unless such use, is altered in any material respect that Licensor reasonably determines exceeds the scope of Licensee’s rights under Section 2.1 or violates any provision of Section 3.
Sample 1
INSPECTIONS AND SAMPLES. Unless otherwise provided in the Contract, all equipment, materials, and work shall be subject to inspection and testing by the District. The District shall have the right to reject equipment, materials, and work not in accordance with the Contract. Rejected work shall be satisfactorily corrected; rejected equipment shall be satisfactorily repaired or replaced with satisfactory equipment; and rejected material shall be satisfactorily replaced with satisfactory material, all in accordance with the Contract. The Contractor shall promptly segregate and remove rejected materials and equipment from the premises. All such correcting, repairing, replacing, and removing shall be by and at the expense of the Contractor. The District will perform inspections in such manner as not to delay the work unreasonably, and the Contractor shall perform its work in such manner as not to delay inspection unreasonably. The Contractor shall give the District reasonable advance notice of operations requiring special inspections or tests, and it may request inspection of a portion of any work at any time by reasonable advance notice to the District. The Contractor shall, at its expense, furnish promptly all facilities, labor, and materials necessary and required for such inspection and tests. Contractor shall provide work area access at all reasonable times to the District and its officers, agents, employees, and any other duly authorized representatives and employees, and all duly authorized representatives of governmental agencies having jurisdiction over work areas or any part thereof for the purpose of determining compliance with Contract requirements. The Contractor shall also arrange for the District, and its officers, agents, employees, and any other duly authorized representatives and employees, to have access at all reasonable times to all places where equipment or materials are being manufactured, produced, or fabricated for use under the Contract. The Contractor shall furnish the District all reasonable facilities for the District’s safety and convenience in inspecting work, at all times and at all places where inspection may take place. If the District finds that conditions are unsafe for inspection at a particular location, he may, upon notice to the Contractor, refuse to inspect in that location until such conditions are corrected. The Contractor shall bear any additional costs resulting from such action, including any costs incurred to permit subsequent inspection o...
Sample 1
AutoNDA by SimpleDocs
INSPECTIONS AND SAMPLES. Each of Piestro and 800 shall have the right to exercise quality control over Go’s and its Approved Sublicensee’s (and any applicable subcontractors) use of the Licensed Marks on or in connection with the Licensed Products and the Service to protect the goodwill associated therewith. In furtherance of the foregoing, subject to Section 4.2: (a) Go shall permit representatives of 800 and/or Piestro, as applicable, to inspect Go’s and its Authorized Sublicensee’s facilities and shall use reasonable efforts to obtain access for 800’s or Piestro’s representatives to inspect the facilities of third-party manufacturers with whom Go contracts pursuant to Section 2.5, upon reasonable notice and during normal business hours; and (b) prior to any use of any Licensed Mxxx which has not previously been approved or is not substantially consistent with a previously approved use, Go shall deliver to 800 and Piestro a representative sample of the Licensed Product, Service or the packaging, labeling, promotional, advertising, or other materials bearing the Licensed Mxxx to 800 and Piestro for approval, which approval shall not be unreasonably withheld, conditioned, or delayed.
Sample 1

Related to INSPECTIONS AND SAMPLES

  • Inspections and Tests 26.1 The Supplier shall at its own expense and at no cost to the Procuring Entity carry out all such tests and/or inspections of the Goods and Related Services as are specified in the SCC. 26.2 The inspections and tests may be conducted on the premises of the Supplier or its Subcontractor, at point of delivery, and/or at the Goods' final destination, or in another place in Kenya as specified in the SCC. Subject to GCC Sub-Clause 26.3, if conducted on the premises of the Supplier or its Subcontractor, all reasonable facilities and assistance, including access to drawings and production data, shall be furnished to the inspectors at no charge to the Procuring Entity. 26.3 The Procuring Entity or its designated representative shall be entitled to attend the tests and/or inspections referred to in GCC Sub-Clause 26.2, provided that the Procuring Entity bear all of its own costs and expenses incurred in connection with such attendance including, but not limited to, all travelling and board and lodging expenses. 26.4 Whenever the Supplier is ready to carry out any such test and inspection, it shall give a reasonable advance notice, including the place and time, to the Procuring Entity. The Supplier shall obtain from any relevant third party or manufacturer any necessary permission or consent to enable the Procuring Entity or its designated representative to attend the test and/or inspection. 26.5 The Procuring Entity may require the Supplier to carry out any test and/or inspection not required by the Contract but deemed necessary to verify that the characteristics and performance of the Goods comply with the technical specifications codes and standards under the Contract, provided that the Supplier's reasonable costs and expenses incurred in the carrying out of such test and/or inspection shall be added to the Contract Price. Further, if such test and/or inspection impedes the progress of manufacturing and/or the Supplier's performance of its other obligations under the Contract, due allowance will be made in respect of the Delivery Dates and Completion Dates and the other obligations so affected. 26.6 The Supplier shall provide the Procuring Entity with a report of the results of any such test and/or inspection. 26.7 The Procuring Entity may reject any Goods or any part thereof that fail to pass any test and/or inspection or do not conform to the specifications. The Supplier shall either rectify or replace such rejected Goods or parts thereof or make alterations necessary to meet the specifications at no cost to the Procuring Entity, and shall repeat the test and/or inspection, at no cost to the Procuring Entity, upon giving a notice pursuant to GCC Sub- Clause 26.4. 26.8 The Supplier agrees that neither the execution of a test and/or inspection of the Goods or any part thereof, nor the attendance by the Procuring Entity or its representative, nor the issue of any report pursuant to GCC Sub-Clause 26.6, shall release the Supplier from any warranties or other obligations under the Contract.

  • Inspection and Tests 3.8.1 The Procuring entity or its representative shall have the right to inspect and/or to test the goods to confirm their conformity to the Contract specifications. The Procuring entity shall notify the tenderer in writing in a timely manner, of the identity of any representatives retained for these purposes. 3.8.2 The inspections and tests may be conducted in the premises of the tenderer or its subcontractor(s), at point of delivery, and/or at the Goods’ final destination If conducted on the premises of the tenderer or its subcontractor(s), all reasonable facilities and assistance, including access to drawings and production data, shall be furnished to the inspectors at no charge to the Procuring entity. 3.8.3 Should any inspected or tested goods fail to conform to the Specifications, the Procuring entity may reject the equipment, and the tenderer shall either replace the rejected equipment or make alterations necessary to make specification requirements free of costs to the Procuring entity. 3.8.4 The Procuring entity’s right to inspect, test and where necessary, reject the goods after the Goods’ arrival shall in no way be limited or waived by reason of the equipment having previously been inspected, tested and passed by the Procuring entity or its representative prior to the equipment delivery. 3.8.5 Nothing in paragraph 3.8 shall in any way release the tenderer from any warranty or other obligations under this Contract.

  • Maintaining Records; Access to Properties and Inspections Maintain financial records in accordance with GAAP and, upon reasonable notice, permit any representatives designated by the Administrative Agent or any Lender to visit and inspect the financial records and the properties of the Borrower or any Significant Subsidiary during normal business hours and to discuss the affairs, finances and condition of the Borrower or any Significant Subsidiary with the officers thereof and independent accountants therefor.

  • Inspection and Testing Each Constructing Entity shall cause inspection and testing of the Interconnection Facilities that it constructs in accordance with the provisions of this section. The Construction Parties acknowledge and agree that inspection and testing of facilities may be undertaken as facilities are completed and need not await completion of all of the facilities that a Constructing Entity is building.

  • Books and Records; Inspection and Examination The Borrower will keep accurate books of record and account for itself pertaining to the Collateral and pertaining to the Borrower's business and financial condition and such other matters as the Lender may from time to time request in which true and complete entries will be made in accordance with GAAP and, upon the Lender's request, will permit any officer, employee, attorney or accountant for the Lender to audit, review, make extracts from or copy any and all corporate and financial books and records of the Borrower at all times during ordinary business hours, to send and discuss with account debtors and other obligors requests for verification of amounts owed to the Borrower, and to discuss the Borrower's affairs with any of its directors, officers, employees or agents. The Borrower will permit the Lender, or its employees, accountants, attorneys or agents, to examine and inspect any Collateral, other collateral covered by the Security Documents or any other property of the Borrower at any time during ordinary business hours.

  • Safety Inspection During inspection of County facilities conducted by the State Division of Occupational Safety and Health for the purpose of determining compliance with the California OSHA requirements, an OCEA designated employee shall be allowed to accompany the inspector while the inspector is in the employee's agency/department. The employee so designated shall suffer no loss of pay when this function is performed during the employee's regularly scheduled work hours.

  • INSPECTION AND REJECTION 8.1 Purchaser shall have the right to inspect and test Products at any time prior to shipment, and within a reasonable time after delivery to the Purchaser’s Destination. Products not inspected within a reasonable time after delivery shall be deemed accepted by Purchaser. The payment for Products shall in no way impair the right of Purchaser to reject nonconforming Products, or to avail itself of any other remedies to which it may be entitled. 8.2 If any of the Products are found at any time to be defective in material or workmanship, damaged, or otherwise not in conformity with the requirements of this Agreement or any applicable Purchase Order, as its exclusive remedy, Purchaser may at its option and at Vendor’s sole cost and expense, elect either to (i) return any damaged, non-conforming or defective Products to Vendor for correction or replacement, or (ii) require Vendor to inspect the Products and remove or replace damaged, non-conforming or defective Products with conforming Products. If Purchaser elects option (ii) in the preceding sentence and Vendor fails promptly to make the necessary inspection, removal and replacement, Purchaser, at its option, may inspect the Products and Vendor shall bear the cost thereof. Payment by Purchaser of any invoice shall not constitute acceptance of the Products covered by such invoice, and acceptance by Purchaser shall not relieve Vendor of its warranties or other obligations under this Agreement. 8.3 The provisions of this Article shall survive the expiration or termination of this Agreement.

  • Books and Records; Inspections Each Credit Party will, and will cause each of its Subsidiaries to, keep proper books of record and accounts in which full, true and correct entries in conformity in all material respects with GAAP shall be made of all dealings and transactions in relation to its business and activities. Each Credit Party will, and will cause each of its Subsidiaries to, permit any authorized representatives designated by the Administrative Agent at the request of the Requisite Lenders (including the right to appoint third party agents), at the Borrower’s expense (subject to the proviso below), to visit and inspect any of the properties of any Credit Party and any of its respective Subsidiaries, to inspect, copy and take extracts from its and their financial and accounting records, and to discuss its and their affairs, finances and accounts with its and their officers and independent public accountants (and an authorized representative of the Borrower shall be allowed to be present during such discussions), all upon reasonable notice and at such reasonable times during normal business hours and as often as may reasonably be requested, in each case, in a manner that does not unduly interfere with the business and operations of the Credit Parties and their Subsidiaries; provided that (i) the Borrower shall only be obligated to reimburse the Administrative Agent and the Requisite Lenders for the expenses of one such inspection per calendar year prior to the occurrence of an Event of Default; and (ii) any authorized representatives designated by any Lender (including the right to appoint third party agents) may accompany the Administrative Agent or its representative in connection with any inspection, in each case at such Lender’s sole expense; provided, further, that, notwithstanding anything to the contrary in this Section 5.6, none of Holdings or any of its Subsidiaries will be required to disclose, permit the inspection, examination or making copies or abstracts of, or discussion of, any document, information or other matter (a) in respect of which disclosure to the Administrative Agent or any Lender (or their respective representatives or contractors) is prohibited by law or any binding confidentiality obligation pursuant to any Contractual Obligation with any Third Party in effect prior to (and not entered into in contemplation of) such Credit Party’s or Subsidiary’s obligations under this Section 5.6 (it being understood and agreed that the Credit Parties shall use their commercially reasonable efforts to provide such information in a manner which would comply with such confidentiality obligation) or (b) that is subject to attorney-client or similar privilege or constitutes attorney work product.

  • Inspection of Properties and Books Etc The Borrower shall permit the Lenders, through the Administrative Agent or any of the Lenders’ other designated representatives, no more frequently than once each calendar year, or more frequently as determined by the Lenders upon the occurrence and during the continuance of an Event of Default, to visit and inspect any of the properties of the Borrower or any of its Subsidiaries, and each such inspection, if no Event of Default has occurred and is continuing, shall be at the Lenders’ expense. The Borrower shall also permit the Lenders, through the Administrative Agent or any of the Lenders’ other designated representatives, to examine the books of account of the Borrower and its Subsidiaries (and to make copies thereof and extracts therefrom), and to discuss the affairs, finances and accounts of the Borrower and its Subsidiaries with, and to be advised as to the same by, its and their officers, all at such reasonable times and intervals as the Administrative Agent or any Lender may reasonably request. The Borrower authorizes the Administrative Agent and, if accompanied by the Administrative Agent, the Lenders to communicate directly with the Borrower’s independent certified public accountants and authorizes such accountants to disclose to the Administrative Agent and the Lenders any and all financial statements and other supporting financial documents and schedules with respect to the business, financial condition and other affairs of the Borrower or any of its Subsidiaries.

  • Inspection of Properties and Books The Borrower and the Guarantors will, and will cause their respective Subsidiaries to, permit the Agent and the Lenders, at the Borrower’s expense (to the extent provided for below) and upon reasonable prior notice, to visit and inspect any of the properties of the Borrower, each Guarantor or any of their respective Subsidiaries (subject to the rights of tenants under their Leases), to examine the books of account of the Borrower, any Guarantor and their respective Subsidiaries (and to make copies thereof and extracts therefrom) and to discuss the affairs, finances and accounts of the Borrower, any Guarantor and their respective Subsidiaries with, and to be advised as to the same by, their respective officers, partners or members, all at such reasonable times and intervals as the Agent or any Lender may reasonably request, provided that so long as no Default or Event of Default shall have occurred and be continuing, the Borrower shall not be required to pay for such visits and inspections more often than once in any twelve (12) month period. The Lenders shall use good faith efforts to coordinate such visits and inspections so as to minimize the interference with and disruption to the normal business operations of such Persons.

Draft better contracts in just 5 minutes Get the weekly Law Insider newsletter packed with expert videos, webinars, ebooks, and more!