Interior Doors. All interior doors shall be 1-3/4” thick, commercial grade, solid core, wood construction, stained and varnished. Face veneer shall be selected grade red oak of standard commercial thickness not less than 1/28” before sanding. Doors and frames shall bear UL labels as required by code. Similar commercial plastic laminate faced or hollow metal may also be provided if approved by the State. Interior doors shall be furnished with 6” wide x 24” high window openings and glazing (wired glazing if required by building code) on the storage room, break room and all pass through doors. The window is not required on the manager’s office and security room. Provide an allowance of one 3’-0” x 6’-8” door for each 25 lineal feet of gypsum board drywall partitioning. Interior doors on all Legal and Regulatory Administration doors i.e. Hearing Offices and Regulation Agents shall have a solid door but a door height side lite on the latch side of the door.
Interior Doors. All interior doors shall be 1-3/4” thick, commercial grade, solid core, wood construction, stained and varnished. Face veneer shall be selected grade red oak of standard commercial thickness not less than 1/28” before sanding. Doors and frames shall bear UL labels as required by code. Similar commercial plastic laminate faced or hollow metal may also be provided if approved by the State. Interior doors shall be furnished with 6” wide x 24” high window openings and glazing (wired glazing if required by building code) on the storage room, break room and all pass through doors.
Interior Doors. All interior doors to be solid core flush panel oak veneer with 3 coats natural color lacquer finish. Frames to be timely metal. Door sizes to be 3'-0" X 7'-0" X 1-3/4" unless otherwise noted on architectural drawings.
Interior Doors. 2.2.1 Office and Conference Room Doors are to be 1 3/4” x 3’-0” x 8’-0” solid core, plain sliced walnut, finish: Marshfield Doors clear 0-95 or equivalent.
2.2.2 Common Area and Support Room Doors are to be 1 3/4” x 3’-0” x 8’-0” solid core, plain sliced walnut, finish: Marshfield Doors clear 0-95 or equivalent.
2.2.3 Laboratory Doors are to be 60 minute rated where required, non-rated elsewhere, 1 3/4” x 3’-0” x 8’-0”. Solid core, plain sliced walnut, finish: Marshfield Doors clear 0-95 or equivalent. Each lab will have a pair of doors for large equipment access. Doors are to be a half-lite vision panel consisting of 1/4” thick tempered safety glass. Armor plates and kick plates will be provided on Lab doors at appropriate locations.
2.2.4 Lab Support Doors, where provided, are to be 60 minute rated as required, non-rated elsewhere, 1 3/4” x 3’-6” x 8’-0”. Solid core, plain sliced walnut, finish: Marshfield Doors clear 0-95 or equivalent. Doors are to be a half-lite vision panel consisting of 1/4” thick tempered safety glass. Armor plates and kick plates will be provided on Lab Support Doors at appropriate locations.
Interior Doors. For solid core wood doors: Hinges: 4-1/2” X 4-1/2” Xxxxx AB700 Full Mortise Hinge, Finish: ANSI A8112 Steel with steel pin Passage Set: Schlage L Series Mortise L9010 03A Finish: 625 One wall bumper: Xxxxx 236W, Finish: US26D Chromium plated dull
Interior Doors. One (1) solid core wood veneer door with hollow metal -------------- frames and latchset will be provided per three hundred (300) square feet of rentable area.
Interior Doors. 2.1.1 Main suite entry doors shall be non-rated 4” deep 13⁄4” x 3’-0” x 8’-0” (pair) aluminum storefront/glass system, clear anodized finish. SCHEDULE 1 GENESIS 1900 ALAMEDA 1 [BigHat Biosciences, Inc.]
2.1.2 Laboratory Suite Doors shall be rated where required by code, non-rated elsewhere, 13⁄4” x 3’-0” x 8’-0”. Solid core. Marshfield, Face: plain sliced, walnut; Finish: Clear 0-95. Each lab shall have a pair of doors for large equipment access. Rated doors shall have a narrow lite vision panel not exceeding 100 sq. inches (typical 1⁄4” tempered 4” wide x 25” tall). Nonrated doors shall have a half-lite vision panel consisting of 1⁄4” thick tempered safety glass. Closers, armor plates, automatic door bottoms, and thresholds shall be provided on Lab doors at appropriate locations.
2.1.3 Lab Support Doors, where provided, shall be rated as required by code, non-rated elsewhere, 13⁄4” x 3’-0” x 8’-0”. Solid core. Marshfield, Face: plain sliced, walnut; Finish: Clear 0-95 or equivalent. Rated doors shall have a narrow lite vision panel not exceeding 100 sq. inches (typical 1⁄4” tempered 4” wide x 25” tall). Non-rated doors shall have a half-lite vision panel consisting of 1⁄4” thick tempered safety glass. Closers, armor plates, automatic door bottoms, and thresholds shall be provided on Lab doors at appropriate locations.
2.1.4 Office and Conference Room Doors shall be non-rated, 13⁄4” x 3’-0” x 8’-0”. Solid core. Marshfield, Face: plain sliced, walnut; Finish: Clear 0-95 or equivalent. No lite.
2.1.5 Building Service Types of Doors: shall be either 13⁄4” x 3’-0” x 8’-0”, 13⁄4” x 3’-0” x 8’-0”, or a pair of 13⁄4” x 3’-0” x 8’-0”, heavy-duty hollow metal, SDI A250.8, Level 2. Physical Performance shall be Level B, per SDI A250.4, 1-3⁄4” thick (44.5 mm), uncoated face, cold-rolled steel sheet with a minimum thickness of Inch (1.0 mm). Edge shall be constructed as Model 1, Full Flush. At Vivarium locations, edge shall be construction as Model 2, Seamless. Cores shall be manufactured from Kraft-paper honeycomb, polystyrene, polyurethane, polyisocyanurate, mineral-board, or vertical steel-stiffener core at the manufacturer’s discretion.
Interior Doors. For solid core wood office doors:
a. Manufactures: Ives 3CB Series
b. Doors up to 36 inches wide: Standard weight, 4-1/2 inches high
c. Finish: ANSI A8112 steel with steel pin. Office Set: Schlage L Series Mortise L9056 series, 17A. Finish: 630, US32D, Satin Stainless steel. Floor stop: IVES FS439, Finish: US26D Satin chrome plated. Hinges: Three-knuckle, concealed bearing hinges.
a. Manufactures: Ives 3CB Series
b. Doors up to 36 inches wide: Standard weight, 4-1/2 inches high
c. Finish: ANSI A8112 steel with steel pin. Passage Set: Schlage L Series Mortise L9010 17A. Finish: 630, US32D, Satin Stainless steel. Floor stop: IVES FS439, Finish: US26D Satin chrome plated. Hinges: Three-knuckle, concealed bearing hinges.
a. Manufactures: Ives 3CB Series
b. Doors up to 36 inches wide: Standard weight, 4-1/2 inches high SCHEDULE 1 GENESIS 1900 ALAMEDA 3 [BigHat Biosciences, Inc.]
c. Doors over 36 inches wide: Heavy weight, 5 inches high
d. Finish: ANSI A8112 steel with steel pin. Passage Set: Schlage L Series Mortise L9010 17A. Finish: 630, US32D, Satin Stainless steel. Wall stop: IVES WS406/407CVX, Finish: 630/US32D Satin stainless steel. Armor plate, automatic door bottom, and threshold. Pairs of lab doors: same as lab doors above, except provide:
a. Coordinator by XXXX, COR X FL, Finish: 628/US28, “Stain aluminum, clear coated.
b. Closers: LCN 1460 series, Finish 630, US32D, Satin Stainless steel. Hinges: Three-knuckle, concealed bearing hinges.
a. Manufactures: Ives 3CB Series
b. Doors up to 36 inches wide: Standard weight, 4-1/2 inches high
c. Finish: ANSI A8112 steel with steel pin. Storeroom Set: Schlage L Series Mortise L9080 T, 17A. Finish: 630, US32D, Satin Stainless steel. Wall stop: IVES WS406/407CVX, Finish: 630/US32D Satin stainless steel. Armor plate, perimeter seals. Hinges: Three-knuckle, concealed bearing hinges.
a. Manufactures: Ives 3CB Series
b. Finish: ANSI A8112 steel with steel pin. Storeroom Set: Schlage L Series Mortise L9080 T, 17A. Finish: 630, US32D, Satin Stainless steel. Wall stop: IVES WS406/407CVX, Finish: 630/US32D Satin stainless steel. Coordinator by XXXX, COR X FL, Finish: 628/US28, “Stain aluminum, clear coated. Closers: LCN 1460 series, Finish 630, US32D, Satin Stainless steel. Armor plate, astragal, perimeter seals, and thresholds as applicable. SCHEDULE 1 GENESIS 1900 ALAMEDA 4 [BigHat Biosciences, Inc.]
Interior Doors. Not included.
Interior Doors. Interior doors and frames within the -------------- Premises shall be specified by Landlord, and purchased and installed by Tenant.
