LONZA'S OBLIGATIONS AS MANUFACTURER Sample Clauses

LONZA'S OBLIGATIONS AS MANUFACTURER. 12.1 Control of Cell Lines and Cell Banks. ***. Lonza shall maintain all portions of the Cell Lines, Master Cell Banks and Working Cell Banks that it has created or received, or that it creates or receives, in safe and secure storage, under its control in the ***, and shall not transfer or permit the transfer of any of the foregoing to any Lonza Affiliate or any Third Party unless such transfer is specifically authorized in advance and in writing by Trubion. Trubion may, upon request, and from time to time, review the relevant portions of Lonza's disaster recovery plan, and, in the event that Trubion determines that Lonza's disaster recovery plan is not sufficient for Trubion's purposes, the Parties shall negotiate in good faith to determine additional disaster recovery procedures, including, without limitation, storage of back-up portions of the Cell Lines, Master Cell Banks and Working Cell Banks in additional Lonza Facilities. Lonza shall comply with all applicable Legal Requirements, including without limitation applicable FDA regulatory requirements, relating to general safety in handling the Cell Lines, Master Cell Banks, Working Cell Banks and any raw materials and components used in manufacturing Bulk Drug. Lonza shall not use the Trubion Process, Cell Lines, related reference standards, Master Cell Banks, Working Cell Banks or any other raw materials, intermediates or active pharmaceutical ingredients supplied by or on behalf of Trubion to Lonza or its Affiliates pursuant to this Agreement, the August 2003 Agreement or the January 2004 Agreement (all of the foregoing, collectively, and including all improvements and enhancements thereto and any derivatives thereof, the "Trubion Materials") for any purpose whatsoever other than the performance of its obligations under this Agreement, including without limitation to manufacture and supply Bulk Drug to Trubion. As between the Parties, Trubion is the sole and exclusive owner of all Trubion Materials, and all right, title and interest in and to the Trubion Materials shall, as between the Parties, remain vested in Trubion. Risk of loss to the Product and any tangible Trubion Materials shall transfer to Lonza upon delivery to Lonza or its Subcontractor. 12.2 Manufacturing Capabilities; LB ***. (a) [intentionally deleted]
AutoNDA by SimpleDocs

Related to LONZA'S OBLIGATIONS AS MANUFACTURER

  • Licensors Obligations 4.5.1. Xxxxx the Licensee the right to use the intellectual property (the Service) as in the Agreement. Ensure 24/7 availability of the Service, apart from preventive maintenance time. 4.5.2. Keep confidential any information, materials, documents which become available to the Licensee in the course of performance of this Agreement. 4.5.3. Duly publish the official messages (documents) related to the right to use the Service.

  • CONTRACTOR’S OBLIGATION FOR RESELLER PARTICIPATION Contractor shall not, directly or indirectly, by agreement, communication or any other means, restrict any Reseller’s participation or ability to participate or compete in an Authorized User RFQ. Conditions of Reseller Participation Resellers must be approved in advance by OGS and posted to the State website before they may respond to an Authorized User’s RFQ. OGS also reserves the right to rescind any such participation at any time or request that Contractor name additional Resellers, in the best interests of Authorized Users, at the OGS’s sole discretion. Contractor shall have the right to qualify Resellers and their participation under this Contract provided that:

  • TRANSNET’S OBLIGATIONS 8.1 Transnet undertakes to promptly comply with any reasonable request by the Supplier/Service Provider for information, including information concerning Transnet's operations and activities, that relates to the Goods/Services as may be necessary for the Supplier/Service Provider to provide the Goods/Services, but for no other purpose. However, Transnet's compliance with any request for information is subject to any internal security rules and requirements and subject to the observance by the Supplier/Service Provider of its confidentiality obligations under this Agreement. 8.2 The Supplier/Service Provider shall give Transnet reasonable notice of any information it requires. 8.3 Transnet agrees to provide the Supplier/Service Provider or its Personnel such access to and use of its facilities as is necessary to allow the Supplier/Service Provider to perform its obligations under this Agreement.

  • The Supplier's Obligations The Supplier will in writing, by the time and date specified by the Contracting Body in accordance with paragraph 3.1.3(b) provide the Contracting Body with either: 3.2.1 a statement to the effect that it does not wish to tender in relation to the relevant Service Requirements; or 3.2.2 the Statement of Work and full details of its tender made in respect of the relevant Statement of Requirements. In the event that the Supplier submits a Statement of Work, it should include, as a minimum: a) an email response subject line to comprise unique reference number and Supplier name, so as to clearly identify the Supplier; b) a brief summary, in the email (followed by a confirmation letter), stating whether or not the Supplier is bidding for the Statement of Requirements; c) a proposal covering the Services Requirements; and d) confirmation of discounts applicable to the work, as referenced in Framework Agreement Schedule 3 (Charging Structure). 3.2.3 The Supplier shall ensure that any prices submitted in relation to a further competition held pursuant to this paragraph 3 shall be based on the Charging Structure and take into account any discount to which the Contracting Body may be entitled as set out in Framework Agreement Schedule 3 (Charging Structure). 3.2.4 The Supplier agrees that: a) all tenders submitted by the Supplier in relation to a further competition held pursuant to this paragraph 3 shall remain open for acceptance by the Contracting Body for ninety (90) Working Days (or such other period specified in the invitation to tender issued by the relevant Contracting Body in accordance with the Ordering Procedure); and b) all tenders submitted by the Supplier are made and will be made in good faith and that the Supplier has not and will not fix(ed) or adjust(ed) the amount of the offer by or in accordance with any agreement or arrangement with any other person. The Supplier certifies that it has not and undertakes that it will not: (a) communicate to any person other than the person inviting these offers the amount or approximate amount of the offer, except where the disclosure, in confidence, of the approximate amount of the offer was necessary to obtain quotations required for the preparation of the offer; and (b) enter into any arrangement or agreement with any other person that he or the other person(s) shall refrain from making an offer or as to the amount of any offer to be submitted.

  • SUPPLIER’S OBLIGATIONS 4.2.1 The Supplier shall be responsible for implementing all the necessary resources for the performance of its obligations under the Contract, with the exception of those specifically mentionedin the Contractas beingunder the responsibility of the Purchaser. The Supplier shall haveall of thematerials andtoolsneededfor theperformanceof the Contractandshall allocate qualified staff in sufficient numbers to perform the Contract within the contractual deadline. The Supplier shall ensureappropriatepersonneltraining andqualification andsubmitanyproof relating to such qualification upon Purchaser’s request. Within seven (7) days, at the latest, of the Contract coming into force, the Supplier shall appoint a staff member as aprojectmanager and shall inform the Purchaser accordingly. The project manager shall plan, coordinate and monitor all the Supply’sneedsin compliancewith the Contractandthe Good Industry Practices andshall be the Supplier’s contact person for the Purchaser. 4.2.2 The Supplier shall request from the Purchaser in a timely manner, any approvals and instructions needed for the correct performance of the Contract. If applicable, the Purchaser shall grant access to the site where the Supply is to be performed (the “Site”) and /or make available to the Supplier the materials and/or perform the works identified in the Contract. 4.2.3 The Supplier shall promptly remedy or shall ensure that its subcontractors promptly remedy any defects relating to the Supply noted during the abovementioned visits as well as any defect notified to it by the Purchaser concerning its performance. 4.2.4 The Supplier shall ensure that the Supply provided are fit for the purposes that may reasonablybeinferred from the Contractandinaccordancewith the timetableforperformance defined in the Contract. In any event the Supplier commitshimself toachieveperformance and results stipulated in the Contract. The performance deadlinesmay only be extended or reduced through an amendment to the Contract, in accordance with the provisions of Article 5.1. The Supply shall be delivered in a state of full completion with the complete Documentation associated therewith as well as all instructions, recommendations and other indications necessary in order for them to be used correctly and under the appropriate safety conditions. “Documentation” shall mean any operation and maintenance manuals, drawings, calculations, technical data, logic diagrams, progress reports, quality documentation, conformity certificates, test reports, bill of lading, certificates of origin, export control classification list number as per any applicable export regulation - such as (i) the European Council Regulation 428/2009 (as amended), (ii) the U.S. Export Administration Regulations (“EAR”), (iii) percentage of U.S. origin content, (iv) U.S. Export Control Classification Number (“ECCN”), (v) U.S. Munitions List category (“USML”),(vi) (if applicable) export authorizations and licenses, and/or (vii) Harmonized Tariff Code - and any such other documents required under the Contract and/or applicable laws. The Supplier shall also furnish such programme of design, manufacture and delivery as the Purchaser may reasonably require. If so required by the Purchaser, the Supplier shall submit any such Documentation to the Purchaser with sufficient time for review and approval. Where the Documentation provided by the Supplier is not compliant with Purchaser’s contractual requirements, the Supplier must make the necessary modifications, and indemnify the Purchaser for any costs, liabilities or penalties incurred by the Purchaser due to the delays or non-compliance in Documentation delivered by the Supplier and shall not be entitled to an adjustment of the delivery schedule in case of any revision.

  • Licensee’s Obligations 3.1 The Licensee shall pay the Licence Fee in advance on or before the 7th day of each English calendar month. 3.2 The Licensee shall observe, perform, conform and comply with and carry out at its own cost in so far as the Licensed Premises are concerned, terms and conditions thereof and provisions, requirements of such acts, rules, regulations, notifications and notices which may, from time to time, be or made applicable or may be issued and certified in respect of the Licensed Premises by Union of India, State of Maharashtra, Municipal Corporation of Greater Mumbai and/or any local or public authority (except such of the provisions and requirements thereof as may involve structural alteration in the Licensed Premises or any part thereof) and shall, at all times indemnify and keep always indemnified the Licensor from and against all liabilities, costs, charges and expenses in respect of non-observance, non-performance and non-compliance thereof. 3.3 The Licensee will keep the interior of the Licensed Premises and every part thereof including doors, windows, shutters, pipes, including existing false ceiling, air conditioning ducting etc., and all additions and improvements therein and thereto in good and substantial repair and condition, (subject to reasonable wear and tear) save and except any such items as have been removed with prior approval of the Licensor. 3.4 In the event, the Licensee as a corporate entity, undertakes any restructuring resulting in formation of subsidiaries of the Licensee, the Licensee may be permitted to extend the use and occupation of the Licensed Premises to such of its subsidiaries so far as the such subsidiaries are in the same line of business as the Licensee and that the permission by the Licensor to extend the use and occupation of the Licensed Premises is at the absolute discretion of the Licensor and with the Licensor's prior express written consent which consent shall not be unreasonably withheld. Provided however, the Licensee shall promptly notify the Licensor of the use of the Licensed Premises by such subsidiaries. 3.5 The Licensee shall use the Licensed Premises without in any manner disturbing and/or interfering with the activities and business of the Licensor or its associates or its subsidiary companies or any other persons authorised by the Licensor in that regard. 3.6 The Licensee shall take all steps reasonably deemed necessary for protecting the Licensed Premises 3.7 The Licensee shall take utmost care in using the Licensed Premises and shall use the Licensed Premises only for the business of the Licensee and in a lawful manner and for no other purpose. 3.8 The Licensee shall keep the Licensed Premises and every part thereof in clean and tidy condition. The Licensee shall not keep anything in or around the Licensed Premises, which shall always be kept un-littered and clean. 3.9 The Licensee or its representatives shall not in any manner prevent the Licensor or any other person authorised by the Licensor from using the common facilities and things used in common with the Licensor or any other person or occupiers authorised by the Licensor. 3.10 The Licensee shall not do any act, deed, thing and matter which would constitute a breach of any statutory requirements and which would adversely affect the Licensed Premises or any part thereof or the rights of the Licensor. 3.11 The Licensee shall at its own cost provide fire safety equipment on the Licensed Premises. In so far as the compliance with the provisions of the Maharashtra Fire Prevention and fire safety laws is concerned the Licensee shall at it own cost provide all the fire safety equipments and take all steps necessary to ensure compliance with the provisions of such laws as may be applicable in this regard. 3.12 The Licensee agrees, confirms and undertakes to bear/reimburse all costs, charges and expenses relating to stamping and registration of this Agreement and its duplicate in their entirety, and shall extend all cooperation to the Licensor in getting the said Agreement registered. However, each Party shall bear its own legal costs.

  • Customer’s Obligations The Customer shall: (a) provide the Supplier with: (i) all necessary co-operation in relation to this agreement; and (ii) all necessary access to such information as may be required by the Supplier; in order to render the Services, including but not limited to Customer Data, security access information and configuration services; (b) comply with all applicable laws and regulations with respect to its activities under this agreement; (c) carry out all other Customer responsibilities set out in this agreement in a timely and efficient manner. In the event of any delays in the Customer's provision of such assistance as agreed by the parties, the Supplier may adjust any agreed timetable or delivery schedule as reasonably necessary; (d) ensure that the Authorised Users use the Services and the Documentation in accordance with the terms and conditions of this agreement and shall be responsible for any Authorised User’s breach of this agreement; (e) obtain and shall maintain all necessary licences, consents, and permissions necessary for the Supplier, its contractors and agents to perform their obligations under this agreement, including without limitation the Services; (f) ensure that its network and systems comply with the relevant specifications provided by the Supplier from time to time; and (g) be solely responsible for procuring and maintaining its network connections and telecommunications links from its systems to the Supplier’s data centres, and all problems, conditions, delays, delivery failures and all other loss or damage arising from or relating to the Customer's network connections or telecommunications links or caused by the internet.

  • THE CUSTOMER’S OBLIGATIONS (1) The Customer must maintain procedures relating to a withdrawal of the goods, recall and tampering and records necessary to support a recall of the goods, and allow the Supplier to inspect such procedures and records at any time on reasonable notice. (2) The Customer must provide any services, resources or facilities to the Supplier as may be reasonably required in respect of a recall of the goods. (3) The Supplier agrees to refund or provide credit to the Customer for any units of the goods that are recalled under this clause unless the conduct of the Customer or its employees, contractors or other persons it has engaged has given rise to the recall of the goods.

  • CONSULTANT’S OBLIGATIONS Consultant shall immediately correct any breach of this Agreement or violation of the MLS Policies within its control, whether committed by Firm, Salesperson Party, or Consultant, upon notice from MLS.

  • Client’s Obligations 4.1 The Client shall: (a) ensure that the terms of the Order and any other information it provides in the Order Form are complete and accurate; (b) co-operate with the Company in all matters relating to the Services; (c) provide the Company, its employees, agents, consultants and subcontractors, with access to the Client’s premises, office accommodation and other facilities as reasonably required by the Company to provide the Services; (d) provide the Company with such information and materials as the Company may reasonably require in order to supply the Services, and ensure that such information is complete and accurate in all material respects; (e) prepare the Client’s premises for the supply of the Services; (f) obtain and maintain all necessary licences, permissions and consents which may be required for the Services before the date on which the Services are to start; (g) comply with all applicable laws, including health and safety laws; and (h) keep all materials, equipment, documents and other property of the Company (Company Materials) at the Client’s premises in safe custody at its own risk, maintain the Company Materials in good condition until returned to the Company, and not dispose of or use the Company Materials other than in accordance with the Company’s written instructions or authorisation; and (i) comply with any additional obligations as set out in the Order Form. 4.2 If the Company’s performance of any of its obligations under the Contract is prevented or delayed by any act or omission by the Client or failure by the Client to perform any relevant obligation (Client Default): (a) without limiting or affecting any other right or remedy available to it, the Company shall have the right to suspend performance of the Services until the Client remedies the Client Default, and to rely on the Client Default to relieve it from the performance of any of its obligations in each case to the extent the Client Default prevents or delays the Company’s performance of any of its obligations; (b) the Company shall not be liable for any costs or losses sustained or incurred by the Client arising directly or indirectly from the Company’s failure or delay to perform any of its obligations as set out in this Clause 4.2; and (c) the Client shall reimburse the Company on written demand for any costs or losses sustained or incurred by the Company arising directly or indirectly from the Client Default. 4.3 The Client shall provide any Client Requirements to the Company in a timely manner in order to enable the Company to provide the Services, including, without limitation, all materials, assets, information and/or documentation of the Client which the Client has agreed to provide or which subsequently becomes necessary to provide in order to allow the Company to provide the Services. 4.4 In the event that the Client should fail to supply the Client Requirements at the time specified or in a timely manner as set out in the above clause 4.3, the Company shall not be held responsible for any consequences of such delays, and the Clients hereby holds harmless the Company from and against all claims, liabilities, losses, costs or expenses arising out of or in connection with such delays.

Draft better contracts in just 5 minutes Get the weekly Law Insider newsletter packed with expert videos, webinars, ebooks, and more!