Measuring and testing equipment Sample Clauses

Measuring and testing equipment. The supplier must make sure that measuring methods and measuring equipment are used, with which the product properties can be monitored as early as pre-series, as well as later during series production. This measuring equipment is subject to measuring equipment monitoring and its suitability is to be verified with an MSA (measurement system analysis). Version Date Checked/approved File name Page
Sample 1Sample 2
AutoNDA by SimpleDocs
Measuring and testing equipment. The supplier guarantees that all significant quality characteristics will checked and that the process for steering and monitoring is fixed for all relevant measuring and testing equipment. This process implies:  testing and release of measuring and testing equipment;  marking;  monitoring, calibration, mounting, timely elimination of errors and maintenance of the measuring and testing equipment;  evidence of the test equipment capability.
Sample 1
Measuring and testing equipment. ‌ 4.2.1 The Supplier declares and guarantees that it has sufficient and suitable measuring and testing equipment to ensure that the manufacturing process and the Product comply with the characteristics indicated in the Technical Documents and in all documents relevant to the Supply relationship. 4.2.2 The Supplier shall regularly verify and calibrate such measuring and testing equipment and shall keep the relevant registration throughout the performance of the Supply.
Sample 1
Measuring and testing equipment. The supplier shall obtain measuring and testing equipment so that all features can be tested in accordance with the technical documents or supply specifications. Special measuring and testing equipment can, if necessary, be provided by XXXXXXXX XXXX WERK as part of a loan agreement. Checking and, if necessary, correcting the functionality and the precision of the measuring and testing equipment at regular intervals is vital.
Sample 1
Measuring and testing equipment. Power consumption of a monitor shall be measured and tested from the AC source to the unit. Partner must measure a representative sample of the configuration of all the models that it ships to the customer, but the Partner does not need to consider power consumption changes that may result from component additions made by the user after sale of the product. See EPA’s testing procedure guidelines for more information. Partner is responsible for only applying the ENERGY STAR logo to its monitors that meet the ENERGY STAR criteria. Partner shall self-certify those products that it determines are compliant. Partner may submit compliant product information to EPA on a voluntary basis using the product information form, if it wishes to have such products included in the ENERGY STAR Product Listing. D. Product Qualification for the ENERGY STAR Logo ENERGY STAR Partner agrees to introduce one or more models of monitors that meet the specifications outlined below. An ENERGY STAR-compliant monitor shall have the capability to automatically enter two successive low-power modes. In the first low-power "sleep" mode, the monitor shall consume 15 xxxxx or less after receiving instructions from a computer or via other functions. If the monitor continues to be idle, upon instructions from the CPU or via other functions, it shall enter a second low-power "deep sleep" mode. An ENERGY STAR- compliant monitor in this second low-power mode shall consume 8 xxxxx of electricity or less. Monitors that have the capability to proceed automatically from active mode to a low-power mode of 8 xxxxx or less comply with the power consumption requirements of this agreement. Upon resumption of user activity, the monitor shall automatically return to full operational capability. It is recommended that for activity not initiated by the user, the monitor will remain in its low-power mode. If the monitor includes a USB hub/ports, it shall be tested without any devices or an upstream cord connected to the hub/ports. E. Customer Education 1. Identification of Qualifying Products in the Marketplace
Sample 1
Measuring and testing equipment. Power consumption of a computer shall be measured and tested from an AC source to the system. Partner must measure a representative sample of the configuration of all the models that it ships to the customer, but the Partner does not need to consider power consumption changes that may result from component additions made by the computer user after sale of product. See EPA’s testing procedure guidelines for more information. Partner is responsible for only applying the ENERGY STAR logo to its system configurations that meet the ENERGY STAR criteria. Partner shall self-certify those products that it determines are compliant. Partner may submit compliant product information to EPA on a voluntary basis using the product information form, if it wishes to have such products included in the ENERGY STAR Product Listing. Product information forms shall include complete information on the features and options installed on tested configurations.
Sample 1
Measuring and testing equipment. The Supplier must provide suitable measuring and testing equipment to ensure the required quality. The Supplier must prove suitability for the intended measuring task by means of a measurement system analysis (MSA). The measuring and testing equipment must be monitored and marked with a suitable system. The monitoring results must be documented. If test equipment is provided by Xxxxxxx GmbH & Co. KG, it must be treated in the Supplier's system like its own test equipment.
Sample 1
AutoNDA by SimpleDocs

Related to Measuring and testing equipment

  • MEASURING EQUIPMENT 1, Seller will maintain and operate, at its own, expense and at the point of delivery of gas hereunder, a meter or meters and other necessary equipment by which the volume of gas delivered hereunder shall be measured, Such meters and equipment shall remain the property of the Seller. 2. Xxxxx agrees to fumish to Seller electricity for operating Seller's meters, at not cost to Seller, 3. Xxxxx agrees to change the charts on Xxxxxx's meters at no cost to Seller and forward same to Seller. 4. Buyer hereby grants to Seller suitable rights-ot-way and easemenisnecessary or incidenial for ihe installation, maintenance, operation and removal of pipeline and other facilities together with rights of ingress thereto and egress there from at all times and hereby agrees to deliver to Seller, for the sum of one dollar ($1 ,00), an appropriate instrument or grant defining such rights and easements located on Buyer's plant site. 5. Buyer may install, maintain and operate such check measuring equipment, including a recording gravitometer and calorimeter as it shall desire, provided that such equipment shall be so installed so as not to interfere with the operation of Seller's measuring equipment at or near the point of deliver. However, all xxxxxxxx to the Buyer shall be based on the metering of the Seller, subject only to the provisions of Paragraph 8 of this Article, 6. Each party shall have the right to be present at the time of any installing, reading, cleaning, changing, repairing, inspecting, testing, calibrating, or adjusting done in connection with the other's measuring equipment used in measuring deliveries hereunder and each party shall advise the other of any intended major maintenance operation sufficiently in advance in order that the other party may conveniently have its representative present.

  • Testing of Metering Equipment Connecting Transmission Owner shall inspect and test all of its Metering Equipment upon installation and at least once every two (2) years thereafter. If requested to do so by NYISO or Developer, Connecting Transmission Owner shall, at Developer’s expense, inspect or test Metering Equipment more frequently than every two (2) years. Connecting Transmission Owner shall give reasonable notice of the time when any inspection or test shall take place, and Developer and NYISO may have representatives present at the test or inspection. If at any time Metering Equipment is found to be inaccurate or defective, it shall be adjusted, repaired or replaced at Developer’s expense, in order to provide accurate metering, unless the inaccuracy or defect is due to Connecting Transmission Owner’s failure to maintain, then Connecting Transmission Owner shall pay. If Metering Equipment fails to register, or if the measurement made by Metering Equipment during a test varies by more than two percent from the measurement made by the standard meter used in the test, Connecting Transmission Owner shall adjust the measurements by correcting all measurements for the period during which Metering Equipment was in error by using Developer’s check meters, if installed. If no such check meters are installed or if the period cannot be reasonably ascertained, the adjustment shall be for the period immediately preceding the test of the Metering Equipment equal to one-half the time from the date of the last previous test of the Metering Equipment. The NYISO shall reserve the right to review all associated metering equipment installation on the Developer’s or Connecting Transmission Owner’s property at any time.

  • Benchmarks for Measuring Accessibility For the purposes of this Agreement, the accessibility of online content and functionality will be measured according to the W3C’s Web Content Accessibility Guidelines (WCAG) 2.0 Level AA and the Web Accessibility Initiative Accessible Rich Internet Applications Suite (WAI-ARIA) 1.0 for web content, which are incorporated by reference.

  • Meter Testing Company shall provide at least twenty-four (24) hours' notice to Seller prior to any test it may perform on the revenue meters or metering equipment. Seller shall have the right to have a representative present during each such test. Seller may request, and Company shall perform, if requested, tests in addition to the every fifth-year test and Seller shall pay the cost of such tests. Company may, in its sole discretion, perform tests in addition to the fifth year test and Company shall pay the cost of such tests. If any of the revenue meters or metering equipment is found to be inaccurate at any time, as determined by testing in accordance with this Section 10.2 (Meter Testing), Company shall promptly cause such equipment to be made accurate, and the period of inaccuracy, as well as an estimate for correct meter readings, shall be determined in accordance with Section 10.3 (Corrections).

  • Year 2000 Compatibility Take all action necessary to assure that its computer based systems are able to operate and effectively process data including dates on and after January 1, 2000, and, at the reasonable request of the Administrative Agent or the Required Lenders, provide evidence to the Lenders of such year 2000 compatibility.

  • Installation, Maintenance, Testing and Repair Unless otherwise agreed in writing by the Parties, to the extent required by Applicable Law, Interconnection provided by a Party shall be equal in quality to that provided by such Party to itself, any subsidiary, affiliates or third party. If either Party is unable to fulfill its obligations under this Section 14.2, it shall notify the other Party of its inability to do so and will negotiate alternative intervals in good faith. The Parties agree that to the extent required by Applicable Law, the standards to be used by a Party for isolating and clearing any disconnections and/or other outages or troubles shall be at parity with standards used by such Party with respect to itself, any subsidiary, affiliate or third party.

  • Performance Testing (a) All performance tests of the Project, including any Initial Performance Test required in Section 2 of Appendix VIII, will be performed in accordance with the test procedures set forth in Appendix VIII (“Performance Test”), including additional procedures and protocols related to Performance Testing as mutually agreed between Buyer and Seller (“Test Procedures”). Seller shall bear all costs and receive all revenues, if applicable, associated with all Performance Tests. (b) After the Initial Delivery Date and during the Delivery Term, Buyer will have the right to conduct a Performance Test (“Buyer Performance Test”) no more than once a calendar year to demonstrate whether the Project is capable of delivering the Distribution Services at the Contract Capacity. Within 30 calendar days following a Buyer Performance Test, Seller will have the right to retest the Project with a Performance Test (“Seller Retest”). For the avoidance of doubt, the results of any Seller Retest will supersede the results of the preceding Buyer Performance Test. (i) If a Buyer Performance Test or, if a corresponding Seller Retest has occurred, a Seller Retest demonstrates the Project is capable of delivering Distribution Services at or above ninety-nine percent (99%) of the Initial Contract Capacity, the Contract Capacity will remain the Initial Contract Capacity; (ii) If a Buyer Performance Test or, if a corresponding Seller Retest has occurred, a Seller Retest demonstrates the Project is capable of delivering Distribution Services at more than or equal to eighty-five (85%) of the Initial Contract Capacity, but less than ninety-nine percent (99%) of the Initial Contract Capacity (“Testing Band”), the Contract Capacity will be automatically adjusted (upwards or downwards) to the capacity commensurate with the amount of Distribution Services the Project delivered during the Performance Test within the Testing Band. (iii) If a Buyer Performance Test or, if a corresponding Seller Retest has occurred, a Seller Retest demonstrates the Project is not capable of delivering Distribution Services of at least eighty-five percent (85%) of the Initial Contract Capacity, an Event of Default shall occur in accordance with Section 7.1(a)(viii).

  • Metering Equipment 13.01. Utility will furnish, install, own and maintain metering equipment capable of measuring the flow of kilowatt-hours (kWh) of energy. The Customer's service associated with the CRG will be metered at a single metering point. The metering equipment will measure energy delivered by Utility to Customer and also measure energy delivered by Customer to Utility. Customer agrees to provide safe and reasonable access to the premises for installation of this equipment and its future maintenance or removal.

  • Computer Equipment Recycling Program If this Contract is for the purchase or lease of computer equipment, then Contractor certifies that it is in compliance with Subchapter Y, Chapter 361 of the Texas Health and Safety Code related to the Computer Equipment Recycling Program and the Texas Commission on Environmental Quality rules in 30 TAC Chapter 328.

  • Revenue Metering The Connecting Transmission Owner owned revenue metering shall be located at the Xxxxx Solar Collector Substation on the generator side of the 69kV breaker and shall consist of: • three (3) combination current/voltage transformer (“CT/VT”) units (manufacturer and model shall be ABB/Xxxxxxx KXM-350 high accuracy, or other Connecting Transmission Owner specified equivalent); and • one (1) revenue meter. (Note: Connecting Transmission Owner’s revenue metering CTs and VTs cannot be used to feed the Interconnection Customer’s check meter.)

Draft better contracts in just 5 minutes Get the weekly Law Insider newsletter packed with expert videos, webinars, ebooks, and more!