Procurement by Applicant From Manufacturers/Suppliers Sample Clauses

Procurement by Applicant From Manufacturers/Suppliers. SCE shall provide the Applicant with a Manufacturers'/ Suppliers' Material Information List showing SCE's material manufacturing specification numbers. Unless otherwise specified by SCE all Material used in the Distribution Line Extension shall be new and be obtained from the manufacturers approved by SCE to supply that particular material and shall meet the manufacturing standards represented by the applicable material manufacturing specification numbers. The Applicant shall provide SCE with manufacturers'/suppliers' certifications that all permanent Materials used in the Work comply with the applicable SCE manufacturing standard.
Sample 1
AutoNDA by SimpleDocs

Related to Procurement by Applicant From Manufacturers/Suppliers

  • PRODUCT MANUFACTURER'S SUPPLIERS Only those dealers/distributors listed by the manufacturer will be considered authorized to act on behalf of the Product Manufacturer.

  • Course Curriculum, Instruction, and Grading X. Xxxx College courses offered as dual credit, regardless of where they are taught, follow the same syllabus, course outline, textbook, grading method, and other academic policies as the courses outlined in the Hill College catalog. B. Approved courses being taught for dual credit must follow the approved master syllabus of the discipline and of Hill College. C. Textbooks should be identical to those approved for use by Hill College. Should an instructor propose an alternative textbook, the textbook must be approved in advance by the appropriate instructional department of Hill College and the Vice President of Instruction. Other instructional materials for dual credit/concurrent courses must be identical or at an equivalent level to materials used by Hill College. D. Courses which result in college‐level credit will follow the standard grading practices of Hill College, as identified by college policy and as identified in the appropriately approved course syllabus. The grades used in college records are A (excellent), B (above average), C (average), D (below average), F (failure), I (incomplete), W (withdrawn), WC (withdrawn COVID). The lowest passing grade is D. Grade point averages are computed by assigning values to each grade as follows: A = 4 points, B = 3 points, C = 2 points, D = 1 point, and F = 0 points. Grading criteria may be devised by Hill College and the ISD to allow faculty the opportunity to award high school credit only or high school and college credit depending upon student performance. E. Faculty, who are responsible for teaching dual credit/concurrent classes, are responsible for keeping appropriate records, certifying census date rosters, providing interim grade reports, certifying final grade reports at the end of the semester, certifying attendance, and providing other reports and information as may be required by Hill College and/or the School District.

  • Selection of Subcontractors, Procurement of Materials and Leasing of Equipment The contractor shall not discriminate on the grounds of race, color, religion, sex, national origin, age or disability in the selection and retention of subcontractors, including procurement of materials and leases of equipment. The contractor shall take all necessary and reasonable steps to ensure nondiscrimination in the administration of this contract. a. The contractor shall notify all potential subcontractors and suppliers and lessors of their EEO obligations under this contract. b. The contractor will use good faith efforts to ensure subcontractor compliance with their EEO obligations.

  • Office of Supplier Diversity The State of Florida supports its diverse business community by creating opportunities for woman-, veteran-, and minority-owned small business enterprises to participate in procurements and contracts. The Department encourages supplier diversity through certification of woman-, veteran-, and minority-owned small business enterprises and provides advocacy, outreach, and networking through regional business events. For additional information, please contact the Office of Supplier Diversity (OSD) at xxxxxxx@xxx.xxxxxxxxx.xxx.

  • Manufacturers Promptly after obtaining actual knowledge thereof, notice of any Manufacturer Event of Default or termination or replacement of a Manufacturer Program;

  • Succession; Sub-Servicers; Subcontractors (a) For so long as the Trust or any Other Securitization Trust is subject to the reporting requirements of the Exchange Act (in addition to any requirements contained in Section 10.07 of this Agreement), in connection with the succession to the Master Servicer, the Special Servicer or any Sub-Servicer as servicer or sub-servicer (to the extent such Sub-Servicer is a “servicer” as contemplated by Item 1108(a)(2) of Regulation AB) or succession to the Certificate Administrator under this Agreement by any Person (i) into which the Master Servicer, the Special Servicer, such Sub-Servicer or Certificate Administrator may be merged or consolidated, or (ii) which may be appointed as a successor to the Master Servicer, the Special Servicer, any such Sub-Servicer or Certificate Administrator, the Certificate Administrator (or, in the case of a successor to the Certificate Administrator, the Trustee) shall provide to the Depositor, as well as any Other Depositor as to which the applicable Companion Loan is affected, at least five (5) Business Days prior to the effective date of such succession or appointment as long as such disclosure prior to such effective date would not be violative of any applicable law or confidentiality agreement, otherwise no later than one (1) Business Day after such effective date, (x) written notice to the Depositor and each such Other Depositor of such succession or appointment and (y) in writing and in form and substance reasonably satisfactory to the Depositor and each such Other Depositor, all information relating to such successor (which such successor Master Servicer, Special Servicer, Sub-Servicer or Certificate Administrator shall be required to provide) reasonably requested by the Depositor or any such Other Depositor in order to comply with its reporting obligation under Item 6.02 of Form 8-K pursuant to the Exchange Act (if such reports under the Exchange Act are required to be filed under the Exchange Act). The Certificate Administrator (or the Trustee, if applicable) shall provide similar notice to the Depositor and each such Other Depositor in connection with any resignation or termination of the Master Servicer, the Special Servicer, any Sub-Servicer or the Certificate Administrator. In addition, with respect to each Serviced Companion Loan, the Certificate Administrator shall comply with the Trust’s obligations under each Co-Lender Agreement (including with respect to the provision of any required notices) in connection with any resignation, termination, replacement or appointment of the Master Servicer, the Special Servicer, any Sub-Servicer or the Certificate Administrator or any successor thereto. (b) For so long as the Trust or any Other Securitization Trust is subject to the reporting requirements of the Exchange Act, if the Master Servicer, the Special Servicer, any Sub-Servicer, the Custodian, the Trustee and the Certificate Administrator (each of the Master Servicer, the Special Servicer, the Custodian, the Trustee and the Certificate Administrator and each Sub-Servicer, for purposes of this Section 10.02(b), Section 10.02(c), Section 10.02(d) and Section 10.17, a “Servicer”) utilizes one or more Subcontractors to perform certain of its obligations hereunder, such Servicer shall promptly upon request provide to the Depositor, as well as any Other Depositor as to which the applicable Serviced Companion Loan is affected, a written description (in form and substance satisfactory to the Depositor and each such Other Depositor) of the role and function of each Subcontractor that is a Servicing Function Participant utilized by such Servicer during the preceding calendar year, specifying (i) the identity of such Subcontractor, and (ii) which elements of the Servicing Criteria will be addressed in assessments of compliance provided by each such Subcontractor. Each Servicer shall cause any Subcontractor determined to be a Servicing Function Participant used by such Servicer for the benefit of the Depositor to comply with the provisions of Section 10.09 and Section 10.10 of this Agreement to the same extent as if such Subcontractor were such Servicer. Such Servicer shall obtain from each such Subcontractor (or, in the case of each Sub-Servicer set forth on Exhibit S, shall use commercially reasonable efforts to cause such Sub-Servicer) and deliver to the applicable Persons any assessment of compliance report and related accountant’s attestation required to be delivered by such Subcontractor under Section 10.09 and Section 10.10 of this Agreement, in each case, as and when required to be delivered. (c) For so long as the Trust or any Other Securitization Trust is subject to the reporting requirements of the Exchange Act, notwithstanding the foregoing, if a Servicer engages a Subcontractor in connection with the performance of any of its duties under this Agreement, such Servicer shall be responsible for determining whether such Subcontractor is a “servicer” within the meaning of Item 1101 of Regulation AB and whether such Subcontractor meets the criteria in Item 1108(a)(2)(i), (ii) or (iii) of Regulation AB. If a Servicer determines, pursuant to the preceding sentence, that such Subcontractor is a “servicer” within the meaning of Item 1101 of Regulation AB and meets the criteria in Item 1108(a)(2)(i), (ii) or (iii) of Regulation AB, then the engagement of such Subcontractor shall not be effective unless and until notice is given to the Depositor and the Certificate Administrator, as well as any Other Depositor as to which the applicable Companion Loan is affected, of any such Subcontractor and sub-servicing agreement and, if such Subcontractor is engaged by the Master Servicer or the Special Servicer, such Subcontractor shall be deemed to be a Sub-Servicer for purposes of this Agreement. Written notice of the engagement of such Subcontractor and the related Sub-Servicing Agreement (other than such agreements set forth on Exhibit S hereto) (with respect to the Master Servicer or the Special Servicer) or sub-servicing agreement (with respect to any other Servicer) shall be delivered to the Depositor, the Certificate Administrator and each such Other Depositor at least five (5) Business Days prior to the effective date of such engagement. Such notice shall contain all information reasonably necessary, and in such form as may be necessary, to enable the Certificate Administrator, as well as any Other Exchange Act Reporting Party as to which the applicable Serviced Companion Loan is affected, to accurately and timely report the event under Item 6.02 of Form 8-K pursuant to Section 10.07 of this Agreement (if such reports under the Exchange Act are required to be filed under the Exchange Act). (d) For so long as the Trust or any Other Securitization Trust is subject to the reporting requirements of the Exchange Act, notwithstanding the foregoing and subject to Section 3.01(c) of this Agreement, if the Master Servicer or the Special Servicer engages a Sub-Servicer or if any other Servicer engages a sub-servicer, in each case, in connection with the performance of any of the duties of the Master Servicer, the Special Servicer or such other Servicer, as applicable, under this Agreement and the related Sub-Servicing Agreement (with respect to the Master Servicer or the Special Servicer) or sub-servicing agreement (with respect to any other Servicer) is either (i) assigned (other than, in the case of a Sub-Servicer engaged by the Master Servicer, an assignment to the Master Servicer) or (ii) amended or modified and the Master Servicer, the Special Servicer or such other Servicer, as applicable, determines that, as a result of such amendment or modification, the Sub-Servicer or sub-servicer, as applicable, would become a “servicer” within the meaning of Item 1101 of Regulation AB that (1) meets the criteria in Item 1108(a)(2)(i), (ii) or (iii) of Regulation AB or (2) meets the criteria in Item 1108(a)(2)(iii) of Regulation AB and services 20% or more of the pool assets, then the Master Servicer, the Special Servicer or such other Servicer, as applicable, shall provide written notice of such amendment, modification or assignment to the Depositor and the Certificate Administrator, as well as any Other Depositor as to which the applicable Companion Loan is affected at least five (5) Business Days prior to the effective date of such amendment, modification or assignment (or if such prior notice would be violative of applicable law or any applicable confidentiality agreement, no later than the time required under Section 10.07 of this Agreement). Such notice shall contain all information reasonably necessary, and in such form as may be necessary, to enable the Certificate Administrator, as well as any Other Exchange Act Reporting Party as to which the applicable Serviced Companion Loan is affected, to accurately and timely report the event under Item 6.02 of Form 8-K pursuant to Section 10.07 of this Agreement (if such reports under the Exchange Act are required to be filed under the Exchange Act). (e) For so long as the Trust or any Other Securitization Trust is subject to the reporting requirements of the Exchange Act, in connection with the succession to the Trustee or Certificate Administrator under this Agreement by any Person (i) into which the Trustee or Certificate Administrator may be merged or consolidated, or (ii) which may be appointed as a successor to the Trustee or Certificate Administrator, the Trustee or Certificate Administrator, as applicable, shall notify the Depositor and each Other Depositor, at least ten (10) Business Days prior to the effective date of such succession or appointment (or if such prior notice would be violative of applicable law or any applicable confidentiality agreement, no later than the time required under Section 10.07 of this Agreement) and shall furnish pursuant to Section 10.07 of this Agreement to the Depositor and each Other Depositor in writing and in form and substance reasonably satisfactory to the Depositor and each Other Depositor, all information reasonably necessary for the Certificate Administrator, the Trustee and each Other Exchange Act Reporting Party to accurately and timely report the event under Item 6.02 of Form 8-K pursuant to Section 10.07 of this Agreement or otherwise (if such reports under the Exchange Act are required to be filed under the Exchange Act).

  • Contractor Sales Reporting Vendor Management Fee Contractor Reports Master Contract Sales Reporting. Contractor shall report total Master Contract sales quarterly to Enterprise Services, as set forth below. Master Contract Sales Reporting System. Contractor shall report quarterly Master Contract sales in Enterprise Services’ Master Contract Sales Reporting System. Enterprise Services will provide Contractor with a login password and a vendor number. The password and vendor number will be provided to the Sales Reporting Representative(s) listed on Contractor’s Bidder Profile. Data. Each sales report must identify every authorized Purchaser by name as it is known to Enterprise Services and its total combined sales amount invoiced during the reporting period (i.e., sales of an entire agency or political subdivision, not its individual subsections). The “Miscellaneous” option may be used only with prior approval by Enterprise Services. Upon request, Contractor shall provide contact information for all authorized purchasers specified herein during the term of the Master Contract. If there are no Master Contract sales during the reporting period, Contractor must report zero sales. Due dates for Master Contract Sales Reporting. Quarterly Master Contract Sales Reports must be submitted electronically by the following deadlines for all sales invoiced during the applicable calendar quarter: March 31: April 30 June 30: July 31 September 30: October 31 December 31: January 31 Vendor Management Fee. Contractor shall pay to Enterprise Services a vendor management fee (“VMF”) of 1.50 percent on the purchase price for all Master Contract sales (the purchase price is the total invoice price less applicable sales tax). The sum owed by Contractor to Enterprise Services as a result of the VMF is calculated as follows: Amount owed to Enterprise Services = Total Master Contract sales invoiced (not including sales tax) x .0150. The VMF must be rolled into Contractor’s current pricing. The VMF must not be shown as a separate line item on any invoice unless specifically requested and approved by Enterprise Services. Enterprise Services will invoice Contractor quarterly based on Master Contract sales reported by Contractor. Contractors are not to remit payment until they receive an invoice from Enterprise Services. Contractor’s VMF payment to Enterprise Services must reference this Master Contract number, work request number (if applicable), the year and quarter for which the VMF is being remitted, and the Contractor’s name as set forth in this Master Contract, if not already included on the face of the check. Failure to accurately report total net sales, to submit a timely usage report, or remit timely payment of the VMF, may be cause for Master Contract termination or the exercise of other remedies provided by law. Without limiting any other available remedies, the Parties agree that Contractor’s failure to remit to Enterprise Services timely payment of the VMF shall obligate Contractor to pay to Enterprise Services, to offset the administrative and transaction costs incurred by the State to identify, process, and collect such sums. The sum of $200.00 or twenty-five percent (25%) of the outstanding amount, whichever is greater, or the maximum allowed by law, if less. Enterprise Services reserves the right, upon thirty (30) days advance written notice, to increase, reduce, or eliminate the VMF for subsequent purchases, and reserves the right to renegotiate Master Contract pricing with Contractor when any subsequent adjustment of the VMF might justify a change in pricing. Annual Master Contract Sales Report. Upon request, Contractor shall provide to Enterprise Services a detailed annual Master Contract sales report. Such report shall include, at a minimum: Product description, part number or other Product identifier, per unit quantities sold, and Master Contract price. This report must be provided in an electronic format that can be read by compatible with MS Excel. Small Business Inclusion. Upon Request by Enterprise Services, Contractor shall provide, within thirty (30) days, an Affidavit of Amounts Paid. Such Affidavit of Amounts Paid either shall state, if applicable, that Contractor still maintains its MWBE certification or state that its subcontractor(s) still maintain(s) its/their MWBE certification(s) and specify the amounts paid to each certified MWBE subcontractor under this Master Contract. Contractor shall maintain records supporting the Affidavit of Amounts Paid in accordance with this Master Contract’s records retention requirements.

  • Customers; Suppliers Executive does not have, and at any time during the term of this Agreement shall not have, any employment with or any direct or indirect interest in (as owner, partner, shareholder, employee, director, officer, agent, consultant or otherwise) any customer of or supplier to Company.

  • Manufacturer A firm that operates or maintains a factory or establishment that produces on the premises, the materials or supplies obtained by the Contractor. Regular Dealer - A firm that owns, operates, or maintains a store, warehouse, or other establishment in which the materials or supplies required for the performance of the contract are bought, kept in stock, and regularly sold to the public in the usual course of business. A regular dealer engages in, as its principal business and in its own name, the purchase and sale or lease of the products in question. A regular dealer in such bulk items as steel, cement, gravel, stone, and petroleum products need not keep such products in stock, if it owns and operates distribution equipment for the products. Brokers and packagers are not regarded as manufacturers or regular dealers within the meaning of this section. United States Department of Transportation (USDOT) - Federal agency responsible for issuing regulations (49 CFR Part 26) and official guidance for the DBE program.

  • Use of Subservicers and Subcontractors (a) The Master Servicer shall cause any Subservicer used by the Master Servicer (or by any Subservicer) for the benefit of the Depositor to comply with the provisions of Section 3.16 and this Article XI to the same extent as if such Subservicer were the Master Servicer (except with respect to the Master Servicer's duties with respect to preparing and filing any Exchange Act Reports or as the Certifying Person). The Master Servicer shall be responsible for obtaining from each Subservicer and delivering to the Depositor any servicer compliance statement required to be delivered by such Subservicer under Section 3.16, any assessment of compliance and attestation required to be delivered by such Subservicer under Section 11.07 and any certification required to be delivered to the Certifying Person under Section 11.05 as and when required to be delivered. As a condition to the succession to any Subservicer as subservicer under this Agreement by any Person (i) into which such Subservicer may be merged or consolidated, or (ii) which may be appointed as a successor to any Subservicer, the Master Servicer shall provide to the Depositor, at least 15 calendar days prior to the effective date of such succession or appointment, (x) written notice to the Depositor of such succession or appointment and (y) in writing and in form and substance reasonably satisfactory to the Depositor, all information reasonably requested by the Depositor in order to comply with its reporting obligation under Item 6.02 of Form 8-K. (b) It shall not be necessary for the Master Servicer, any Subservicer or the Trustee to seek the consent of the Depositor or any other party hereto to the utilization of any Subcontractor. The Master Servicer or the Trustee, as applicable, shall promptly upon request provide to the Depositor (or any designee of the Depositor, such as the Master Servicer or administrator) a written description (in form and substance satisfactory to the Depositor) of the role and function of each Subcontractor utilized by such Person (or in the case of the Master Servicer or any Subservicer), specifying (i) the identity of each such Subcontractor, (ii) which (if any) of such Subcontractors are "participating in the servicing function" within the meaning of Item 1122 of Regulation AB, and (iii) which elements of the Servicing Criteria will be addressed in assessments of compliance provided by each Subcontractor identified pursuant to clause (ii) of this paragraph. As a condition to the utilization of any Subcontractor determined to be a Reporting Subcontractor, the Master Servicer or the Trustee, as applicable, shall cause any such Subcontractor used by such Person (or in the case of the Master Servicer or any Subservicer) for the benefit of the Depositor to comply with the provisions of Sections 11.07 and 11.09 of this Agreement to the same extent as if such Subcontractor were the Master Servicer (except with respect to the Master Servicer's duties with respect to preparing and filing any Exchange Act Reports or as the Certifying Person) or the Trustee, as applicable. The Master Servicer or the Trustee, as applicable, shall be responsible for obtaining from each Subcontractor and delivering to the Depositor and the Master Servicer, any assessment of compliance and attestation required to be delivered by such Subcontractor under Section 11.05 and Section 11.07, in each case as and when required to be delivered.

Draft better contracts in just 5 minutes Get the weekly Law Insider newsletter packed with expert videos, webinars, ebooks, and more!