Quality Control Measures Sample Clauses

Quality Control Measures. Buyer Purchasing Parties shall institute and undertake quality control measures with respect to their storage, shipment, handling and distribution of Licensed Products and Combination Products that comply with applicable Seller instructions, Law, and generally accepted industry standards. Seller shall have the right to audit all facilities used by Buyer Purchasing Parties to fulfill their obligations under this Section 4.5.
Sample 1Sample 2
AutoNDA by SimpleDocs
Quality Control Measures. The proponent shall provide and exercise the standard of care, skill, and diligence required by accepted professional practices and procedures developed by professional bodies in the performance of the services. Those measures are to be transparent and available to the Town of Taber.
Sample 1Sample 2
Quality Control Measures. Dependent upon the risk to TTM, product quality, and the availability of replacement Suppliers / Subcontractors, TTM will determine the level of response required for non-conforming product. Below are examples of control mechanisms TTM may utilize:
Sample 1
Quality Control Measures. The producing party shall take reasonable steps to ensure that all Data is produced without technical defects that could impair the use of such Data. If either Party becomes aware of any potential defect or delay with any of the procedures described herein, that Party shall promptly advise the other Parties as soon as possible so that the Parties can meet and confer in an attempt to address the problem. To the extent replacement Data is required due to a technical defect in the production of Data, the producing party shall promptly produce the replacement Data. Effective quality control measures will be instituted by all Parties to ensure that the Production Methodology and Sections C and D herein work as intended by the Parties.
Sample 1
Quality Control Measures. This section outlines the different methods and systems that were adopted to ensure that study instruments were valid and reliable.
Sample 1
Quality Control Measures. (i) Prior to shipment of the Products, Aloe shall fax to the INB Quality Control Director a Certificate of Analysis ("C/A") certifying that the products being shipped meet the applicable Product Specifications; (ii) On the date of production for each lot of Products, Aloe shall deliver to the INB Quality Control Director for inspection and analysis, a sample of the Products taken from the beginning, middle and end of each lot.
Sample 1
Quality Control Measures. Depending of the risk to Viasystems, product quality, and the availability of replacement suppliers/sub-contractors, Viasystems will determine the level of response required for non-conforming product. Below are examples of control mechanisms Viasystems may utilize:
Sample 1
AutoNDA by SimpleDocs
Quality Control Measures. 13.1 CN agrees that the manufacturing of the Product shall be carried out by manufacturers specializing in the manufacture and packaging of pharmaceutical and health care products and that the engagement of any such manufacturer shall be subject to the prior approval of SCOLR, not to be unreasonably withheld. 13.2 CN agrees that all ingredients to be used in the manufacture of the Product shall comply with all applicable industry standards. All quality control and testing procedures employed by CN in the manufacture of the Products shall be strictly adhered to regardless of whether the Products are manufactured in Canada, U.S or elsewhere. 13.3 CN shall comply with all applicable laws, rules and regulations in performing its obligations under this Agreement.
Sample 1

Related to Quality Control Measures

  • Quality Control A. Controlled Affiliate agrees to use the Licensed Marks and Name only in connection with the licensed services and further agrees to be bound by the conditions regarding quality control shown in attached Exhibit A as they may be amended by BCBSA from time-to-time. B. Controlled Affiliate agrees to comply with all applicable federal, state and local laws. C. Controlled Affiliate agrees that it will provide on an annual basis (or more often if reasonably required by Plan or by BCBSA) a report or reports to Plan and BCBSA demonstrating Controlled Affiliate’s compliance with the requirements of this Agreement including but not limited to the quality control provisions of this paragraph and the attached Exhibit A. D. Controlled Affiliate agrees that Plan and/or BCBSA may, from time-to-time, upon reasonable notice, review and inspect the manner and method of Controlled Affiliate’s rendering of service and use of the Licensed Marks and Name. E. As used herein, a Controlled Affiliate is defined as an entity organized and operated in such a manner, that it meets the following requirements: (1) A Plan or Plans authorized to use the Licensed Marks in the Service Area of the Controlled Affiliate pursuant to separate License Agreement(s) with BCBSA, other than such Controlled Affiliate’s License Agreement(s), (the “Controlling Plan(s)”), must have the legal authority directly or indirectly through wholly-owned subsidiaries to select members of the Controlled Affiliate’s governing body having not less than 50% voting control thereof and to: (a) prevent any change in the articles of incorporation, bylaws or other establishing or governing documents of the Controlled Affiliate with which the Controlling Plan(s) do(es) not concur; (b) exercise control over the policy and operations of the Controlled Affiliate at least equal to that exercised by persons or entities (jointly or individually) other than the Controlling Plan(s); and Notwithstanding anything to the contrary in (a) through (b) hereof, the Controlled Affiliate’s establishing or governing documents must also require written approval by the Controlling Plan(s) before the Controlled Affiliate can: (i) change its legal and/or trade names; (ii) change the geographic area in which it operates; (iii) change any of the type(s) of businesses in which it engages; (iv) create, or become liable for by way of guarantee, any indebtedness, other than indebtedness arising in the ordinary course of business; (v) sell any assets, except for sales in the ordinary course of business or sales of equipment no longer useful or being replaced; (vi) make any loans or advances except in the ordinary course of business; (vii) enter into any arrangement or agreement with any party directly or indirectly affiliated with any of the owners or persons or entities with the authority to select or appoint members or board members of the Controlled Affiliate, other than the Plan or Plans (excluding owners of stock holdings of under 5% in a publicly traded Controlled Affiliate); (viii) conduct any business other than under the Licensed Marks and Name; (ix) take any action that any Controlling Plan or BCBSA reasonably believes will adversely affect the Licensed Marks and Name. In addition, a Plan or Plans directly or indirectly through wholly owned subsidiaries shall own at least 50% of any for-profit Controlled Affiliate. (2) A Plan or Plans authorized to use the Licensed Marks in the Service Area of the Controlled Affiliate pursuant to separate License Agreement(s) with BCBSA, other than such Controlled Affiliate’s License Agreement(s), (the “Controlling Plan(s)”), have the legal authority directly or indirectly through wholly-owned subsidiaries to select members of the Controlled Affiliate’s governing body having more than 50% voting control thereof and to: (a) prevent any change in the articles of incorporation, bylaws or other establishing or governing documents of the Controlled Affiliate with which the Controlling Plan(s) do(es) not concur; (b) exercise control over the policy and operations of the Controlled Affiliate. In addition, a Plan or Plans directly or indirectly through wholly-owned subsidiaries shall own more than 50% of any for-profit Controlled Affiliate.

  • Quality control system (i) The Contractor shall establish a quality control mechanism to ensure compliance with the provisions of this Agreement (the “Quality Assurance Plan” or “QAP”). (ii) The Contractor shall, within 30 (thirty) days of the Appointed Date, submit to the Authority’s Engineer its Quality Assurance Plan which shall include the following: (a) organisation, duties and responsibilities, procedures, inspections and documentation; (b) quality control mechanism including sampling and testing of Materials, test frequencies, standards, acceptance criteria, testing facilities, reporting, recording and interpretation of test results, approvals, check list for site activities, and proforma for testing and calibration in accordance with the Specifications for Road and Bridge Works issued by MORTH, relevant IRC specifications and Good Industry Practice; and (c) internal quality audit system. The Authority’s Engineer shall convey its approval to the Contractor within a period of 21 (twenty-one) days of receipt of the QAP stating the modifications, if any, required, and the Contractor shall incorporate those in the QAP to the extent required for conforming with the provisions of this Clause 11.2. (iii) The Contractor shall procure all documents, apparatus and instruments, fuel, consumables, water, electricity, labour, Materials, samples, and qualified personnel as are necessary for examining and testing the Project Assets and workmanship in accordance with the Quality Assurance Plan. (iv) The cost of testing of Construction, Materials and workmanship under this Article 11 shall be borne by the Contractor.

  • Quality Control Program Engineer shall have a quality control program in place that ensures that all deliverable work is of high quality. Engineer shall submit a plan detailing its program to the Inspection Branch of the TxDOT Bridge Division for review and approval prior to beginning work. State may review or audit the programs.

  • Interim Measures 6.1 The Parties acknowledge that the British Columbia Claims Task Force made the following recommendation concerning Interim Measures:

  • Use; Quality Control a. Neither party may alter the other party’s trademarks from the form provided and must comply with removal requests as to specific uses of its trademarks or logos. b. Each party agrees to use, and to cause its Permitted Sublicensees to use, the other party’s trademarks only in good faith and in a dignified manner consistent with such party’s use of the trademarks. Upon written notice to the breaching party, the breaching party has 30 days of the date of the written notice to cure the breach or the license will be terminated.

  • Benchmarks for Measuring Accessibility For the purposes of this Agreement, the accessibility of online content and functionality will be measured according to the W3C’s Web Content Accessibility Guidelines (WCAG) 2.0 Level AA and the Web Accessibility Initiative Accessible Rich Internet Applications Suite (WAI-ARIA) 1.0 for web content, which are incorporated by reference.

  • Data Integrity Control Personal Data will remain intact, complete and current during processing activities.

  • Technical and Organizational Measures The following sections define SAP’s current technical and organizational measures. SAP may change these at any time without notice so long as it maintains a comparable or better level of security. Individual measures may be replaced by new measures that serve the same purpose without diminishing the security level protecting Personal Data.

  • Environmental Measures (i) The Contractor agrees to conduct its activities in connection with the Agreement in such a manner so as to comply with the environmental requirements which includes, inter alia, all the conditions required to be satisfied under the environmental clearances and applicable law, and assumes full responsibility for measures which are required to be taken to ensure such compliance.

  • Remedial Measures Upon becoming aware of an alleged security breach, Contractor’s Contract Manager must set up a conference call with the Department’s and the Customer’s Contract Manager. The conference call invitation must contain a brief description of the nature of the event. When possible, a thirty (30)- minute notice will be given to allow Department personnel to be available for the call. If the designated time is not practical for the Customer, an alternate time for the call will be scheduled. Contractor must share all available information on the call. The Contractor must answer all questions based on the information known at that time and answer additional questions as additional information becomes known. The Contractor must provide the Department and Customer with final documentation of the incident including all actions that took place. If the Contractor becomes aware of a security breach or security incident outside of normal business hours, the Contractor must notify the Department’s and the Customer’s Contract Manager and in all events, within one business day.

Draft better contracts in just 5 minutes Get the weekly Law Insider newsletter packed with expert videos, webinars, ebooks, and more!