Provisions Related to Extended Revolving Credit Commitments If the maturity date shall have occurred in respect of any tranche of Revolving Credit Commitments at a time when another tranche or tranches of Revolving Credit Commitments is or are in effect with a longer maturity date, then on the earliest occurring maturity date all then outstanding Swing Line Loans shall be repaid in full on such date (and there shall be no adjustment to the participations in such Swing Line Loans as a result of the occurrence of such maturity date); provided, however, that if on the occurrence of such earliest maturity date (after giving effect to any repayments of Revolving Credit Loans and any reallocation of Letter of Credit participations as contemplated in Section 2.03(l)), there shall exist sufficient unutilized Extended Revolving Credit Commitments so that the respective outstanding Swing Line Loans could be incurred pursuant the Extended Revolving Credit Commitments which will remain in effect after the occurrence of such maturity date, then there shall be an automatic adjustment on such date of the participations in such Swing Line Loans and the same shall be deemed to have been incurred solely pursuant to the relevant Extended Revolving Credit Commitments, and such Swing Line Loans shall not be so required to be repaid in full on such earliest maturity date.
The Revolving Credit Facility On the terms and conditions set forth in the MLA and this Supplement, CoBank agrees to make loans to the Company during the period set forth below in an aggregate principal amount not to exceed, at any one time outstanding, the lesser of $25,000,000.00 (the “Commitment”), or the “Borrowing Base” (as calculated pursuant to the Borrowing Base Report attached hereto as Exhibit A). Within the limits of the Commitment, the Company may borrow, repay and reborrow.
Termination of Revolving Credit Facility The Revolving Credit Facility and the Revolving Credit Commitments shall terminate on the Revolving Credit Maturity Date.
The Revolving Credit (i) Subject to the terms and conditions of this Agreement and in reliance upon the representations and warranties of the Credit Parties contained herein, each Lender severally and not jointly agrees to make Loans to the Borrowers (each such Loan, a “Revolving Loan”) from time to time on any Business Day during the period from the Restatement Effective Date through the Final Availability Date, in an aggregate amount not to exceed at any time outstanding the amount set forth opposite such Lender’s name in Schedule 1.1(a) under the heading “Revolving Loan Commitments” (such amount as the same may be reduced or increased from time to time in accordance with this Agreement, being referred to herein as such Lender’s “Revolving Loan Commitment”); provided, however, that, after giving effect to any Borrowing of Revolving Loans, (x) the Aggregate Revolving Exposure shall not exceed the Maximum Borrowing Availability and (y) the Revolving Exposure of any Lender shall not exceed such Lender’s Revolving Loan Commitment. Subject to the other terms and conditions hereof, amounts borrowed under this subsection 1.1(a) may be repaid and reborrowed from time to time.
(ii) Notwithstanding anything to the contrary contained in this Agreement, if the Borrower Representative requests that Lenders make, or permit to remain outstanding Revolving Loans that, when aggregated with the outstanding Letter of Credit Obligations and Swing Loans, would be in excess of the Borrowing Base minus the Availability Block at such time (any such excess Revolving Loan is herein referred to as an “Overadvance”), Agent may, in its sole discretion, elect to make, or permit to remain outstanding such Overadvance so long as Agent deems, in its sole discretion, such Overadvance necessary or desirable to preserve or protect any Collateral, or to enhance the collectibility or repayment of Obligations, or to pay any other amounts chargeable to Credit Parties under any Loan Documents, including costs, fees and expenses; provided, however, that (A) no Overadvance shall remain outstanding for more than sixty (60) consecutive days during any one hundred eighty (180) consecutive day period (provided that no Overadvance may be funded to fully refinance an existing Overadvance) and (B) Agent may not cause Lenders to make, or permit to remain outstanding, (1) aggregate Revolving Loans in excess of the Aggregate Revolving Loan Commitment less the sum of outstanding Swing Loans plus the aggregate amount of Letter of Credit Obligations or (2) an Overadvance in an aggregate amount in excess of 10% of the Aggregate Revolving Loan Commitment. If an Overadvance is made, or permitted to remain outstanding, pursuant to the preceding sentence, then all Lenders shall be bound to make, or permit to remain outstanding, such Overadvance based upon their Revolving Loan Commitment Percentage of the Aggregate Revolving Loan Commitment in accordance with the terms of this Agreement, regardless of whether the conditions to lending set forth in Section 2.2 have been met. Furthermore, Required Lenders may prospectively revoke Agent’s ability to make or permit Overadvances by written notice to Agent. All Overadvances shall constitute Base Rate Loans, shall bear interest at the Base Rate plus the Applicable Margin for Revolving Loans and the default rate under subsection 1.3(c), and shall be due and payable upon demand of the Agent.
(iii) Any Revolving Loan outstanding at the time of the Restatement Effective Date under the Existing Credit Agreement shall, for the avoidance of doubt, continue as a Revolving Loan under this Agreement, at the applicable rates and on such other terms as set forth herein.
Nature of Lenders’ Obligations with Respect to Revolving Credit Loans Each Lender shall be obligated to participate in each request for Revolving Credit Loans pursuant to Section 2.5 [Revolving Credit Loan Requests; Swing Loan Requests] in accordance with its Ratable Share. The aggregate of each Lender’s Revolving Credit Loans outstanding hereunder to the Borrower at any time shall never exceed its Revolving Credit Commitment minus its Ratable Share of the outstanding Swing Loans and Letter of Credit Obligations. The obligations of each Lender hereunder are several. The failure of any Lender to perform its obligations hereunder shall not affect the Obligations of the Borrower to any other party nor shall any other party be liable for the failure of such Lender to perform its obligations hereunder. The Lenders shall have no obligation to make Revolving Credit Loans hereunder on or after the Expiration Date.
Termination or Reduction of Revolving Credit Commitments The Borrower shall have the right, upon not less than three Business Days’ notice to the Administrative Agent (which shall promptly notify each Lender thereof), to terminate the Revolving Credit Commitments or, from time to time, to reduce the amount of the Revolving Credit Commitments; provided that no such termination or reduction of Revolving Credit Commitments shall be permitted if, after giving effect thereto and to any prepayments of the Revolving Credit Loans made on the effective date thereof, the Total Revolving Extensions of Credit would exceed the Total Revolving Credit Commitments. Any such reduction shall be in an amount equal to $1,000,000, or a whole multiple thereof, and shall reduce permanently the Revolving Credit Commitments then in effect.
Termination or Reduction of Revolving Commitments The Borrower shall have the right, upon not less than three Business Days’ notice to the Administrative Agent, to terminate the Revolving Commitments or, from time to time, to reduce the amount of the Revolving Commitments; provided that no such termination or reduction of Revolving Commitments shall be permitted if, after giving effect thereto and to any prepayments of the Revolving Loans and Swingline Loans made on the effective date thereof, the Total Revolving Extensions of Credit would exceed the Total Revolving Commitments. Any such reduction shall be in an amount equal to $1,000,000, or a whole multiple thereof, and shall reduce permanently the Revolving Commitments then in effect.
Circumstances Affecting LIBOR Rate Availability In connection with any request for a LIBOR Rate Loan or a conversion to or continuation thereof, if for any reason (i) the Administrative Agent shall determine (which determination shall be conclusive and binding absent manifest error) that Dollar deposits are not being offered to banks in the London interbank Eurodollar market for the applicable amount and Interest Period of such Loan, (ii) the Administrative Agent shall determine (which determination shall be conclusive and binding absent manifest error) that reasonable and adequate means do not exist for the ascertaining the LIBOR Rate for such Interest Period with respect to a proposed LIBOR Rate Loan or (iii) the Required Lenders shall determine (which determination shall be conclusive and binding absent manifest error) that the LIBOR Rate does not adequately and fairly reflect the cost to such Lenders of making or maintaining such Loans during such Interest Period, then the Administrative Agent shall promptly give notice thereof to the Borrower. Thereafter, until the Administrative Agent notifies the Borrower that such circumstances no longer exist, the obligation of the Lenders to make LIBOR Rate Loans and the right of the Borrower to convert any Loan to or continue any Loan as a LIBOR Rate Loan shall be suspended, and the Borrower shall either (A) repay in full (or cause to be repaid in full) the then outstanding principal amount of each such LIBOR Rate Loan together with accrued interest thereon (subject to Section 5.1(d)), on the last day of the then current Interest Period applicable to such LIBOR Rate Loan; or (B) convert the then outstanding principal amount of each such LIBOR Rate Loan to a Base Rate Loan as of the last day of such Interest Period.
Extension of Revolving Credit Commitments The Borrower may at any time and from time to time request that all or a portion of the Revolving Credit Commitments of a given Class (each, an “Existing Revolver Tranche”) be amended to extend the Maturity Date with respect to all or a portion of any principal amount of such Revolving Credit Commitments (any such Revolving Credit Commitments which have been so amended, “Extended Revolving Credit Commitments”) and to provide for other terms consistent with this Section 2.16. In order to establish any Extended Revolving Credit Commitments, the Borrower shall provide a notice to the Administrative Agent (who shall provide a copy of such notice to each of the Lenders under the applicable Existing Revolver Tranche) (each, a “Revolver Extension Request”) setting forth the proposed terms of the Extended Revolving Credit Commitments to be established, which shall (x) be identical as offered to each Lender under such Existing Revolver Tranche (including as to the proposed interest rates and fees payable) and offered pro rata to each Lender under such Existing Revolver Tranche and (y) be identical to the Revolving Credit Commitments under the Existing Revolver Tranche from which such Extended Revolving Credit Commitments are to be amended, except that: (i) the Maturity Date of the Extended Revolving Credit Commitments may be delayed to a later date than the Maturity Date of the Revolving Credit Commitments of such Existing Revolver Tranche, to the extent provided in the applicable Extension Amendment; (ii) the Effective Yield with respect to extensions of credit under the Extended Revolving Credit Commitments (whether in the form of interest rate margin, upfront fees, commitment fees, original issue discount or otherwise) may be different than the Effective Yield for extensions of credit under the Revolving Credit Commitments of such Existing Revolver Tranche, in each case, to the extent provided in the applicable Extension Amendment; (iii) the Extension Amendment may provide for other covenants and terms that apply solely to any period after the Latest Maturity Date that is in effect on the effective date of the Extension Amendment (immediately prior to the establishment of such Extended Revolving Credit Commitments); and (iv) all borrowings under the applicable Revolving Credit Commitments (i.e., the Existing Revolver Tranche and the Extended Revolving Credit Commitments of the applicable Revolver Extension Series) and repayments thereunder shall be made on a pro rata basis (except for (I) payments of interest and fees at different rates on Extended Revolving Credit Commitments (and related outstandings) and (II) repayments required upon the Maturity Date of the non-extending Revolving Credit Commitments); provided, further, that (A) no Default shall have occurred and be continuing at the time a Revolver Extension Request is delivered to Lenders, (B) in no event shall the final maturity date of any Extended Revolving Credit Commitments of a given Revolver Extension Series at the time of establishment thereof be earlier than the then Latest Maturity Date of any other Revolving Credit Commitments hereunder, (C) any such Extended Revolving Credit Commitments (and the Liens securing the same) shall be permitted by the terms of the Intercreditor Agreements (to the extent any Intercreditor Agreement is then in effect) and (D) all documentation in respect of such Extension Amendment shall be consistent with the foregoing. Any Extended Revolving Credit Commitments amended pursuant to any Revolver Extension Request shall be designated a series (each, a “Revolver Extension Series”) of Extended Revolving Credit Commitments for all purposes of this Agreement; provided that any Extended Revolving Credit Commitments amended from an Existing Revolver Tranche may, to the extent provided in the applicable Extension Amendment, be designated as an increase in any previously established Revolver Extension Series with respect to such Existing Revolver Tranche. Each Revolver Extension Series of Extended Revolving Credit Commitments incurred under this Section 2.16 shall be in an aggregate principal amount that is not less than $5,000,000.
Unbundled Loop Modifications (Line Conditioning 2.5.1 Line Conditioning is defined as routine network modification that BellSouth regularly undertakes to provide xDSL services to its own customers. This may include the removal of any device, from a copper Loop or copper Subloop that may diminish the capability of the Loop or Subloop to deliver high-speed switched wireline telecommunications capability, including xDSL service. Such devices include, load coils, excessive bridged taps, low pass filters, and range extenders. Excessive bridged taps are bridged taps that serves no network design purpose and that are beyond the limits set according to industry standards and/or the BellSouth’s TR 73600 Unbundled Local Loop Technical Specification.
2.5.2 BellSouth will remove load coils only on copper Loops and Subloops that are less than eighteen thousand (18,000) feet in length.
2.5.3 For any copper loop being ordered by NewPhone which has over six thousand (6,000) feet of combined bridged tap will be modified, upon request from NewPhone, so that the loop will have a maximum of six thousand (6,000) feet of bridged tap. This modification will be performed at no additional charge to NewPhone. Loop conditioning orders that require the removal of bridged tap that serves no network design purpose on a copper Loop that will result in a combined total of bridged tap between two thousand five hundred (2,500) and six thousand (6,000) feet will be performed at the rates set forth in Exhibit A.
2.5.4 NewPhone may request removal of any unnecessary and non-excessive bridged tap (bridged tap between zero (0) and two thousand five hundred (2,500) feet which serves no network design purpose), at rates pursuant to BellSouth’s SC Process as mutually agreed to by the Parties.
2.5.5 Rates for ULM are as set forth in Exhibit A.
2.5.6 BellSouth will not modify a Loop in such a way that it no longer meets the technical parameters of the original Loop type (e.g., voice grade, ADSL, etc.) being ordered.
2.5.7 If NewPhone requests ULM on a reserved facility for a new Loop order, BellSouth may perform a pair change and provision a different Loop facility in lieu of the reserved facility with ULM if feasible. The Loop provisioned will meet or exceed specifications of the requested Loop facility as modified. NewPhone will not be charged for ULM if a different Loop is provisioned. For Loops that require a DLR or its equivalent, BellSouth will provide LMU detail of the Loop provisioned.
2.5.8 NewPhone shall request Loop make up information pursuant to this Attachment prior to submitting a service inquiry and/or a LSR for the Loop type that NewPhone desires BellSouth to condition.
2.5.9 When requesting ULM for a Loop that BellSouth has previously provisioned for NewPhone, NewPhone will submit a SI to BellSouth. If a spare Loop facility that meets the Loop modification specifications requested by NewPhone is available at the location for which the ULM was requested, NewPhone will have the option to change the Loop facility to the qualifying spare facility rather than to provide ULM. In the event that BellSouth changes the Loop facility in lieu of providing ULM, NewPhone will not be charged for ULM but will only be charged the service order charges for submitting an order.
