REQUIREMENTS FOR DRB MEMBERSHIP Sample Clauses

REQUIREMENTS FOR DRB MEMBERSHIP. 3.1. Each prospective DRB Member shall individually represent that he/she is qualified and able to perform independently and impartially the duties set forth in Article 27A of the EPC Agreement, these DRB Procedures and the DRB Member Agreement. It is imperative that DRB Members show no partiality to either the Contractor or the Owners, or have any conflict of interest. The DRB Members shall agree to abide by the Code of Ethics recommended by the Dispute Resolution Board Foundation. 3.2. Each DRB Member shall have the following professional experience and qualifications: 3.2.1. Experience with the interpretation and implementation of EPC contracts and associated documents; 3.2.2. Experience in construction matters and the resolution of design and construction disputes relevant to the scope of work for this project, and 3.2.3. Prior experience as a member of a dispute resolution board or as a mediator or arbitrator with respect to complex construction disputes is preferred, but not required. 3.3. The chair of the DRB (the “DRB Chair”) shall also have administrative and dispute resolution experience and the ability to facilitate the DRB's proceedings. It is also desirable for the DRB Chair to have substantial experience in construction dispute resolution, adjudication or arbitration, the interpretation of construction contract documents, and the analysis and resolution of construction claims. 3.4. It is imperative that all members of the DRB be neutral, act impartially, and be free from any conflict of interest. The avoidance of an actual or perceived conflict of interest and/or bias is central to the effectiveness of the DRB. Consequently, the DRB Members shall meet the following criteria and limitations for membership: 3.4.1. Direct Employment: Individuals who are current or former employees of any of the Parties, or any of the Additional Project Parties, may not serve as DRB Members. Prospective DRB Members who are current or former employees of any of the Potential Conflict Parties must disclose that employment information in writing at the time of submission of the information described in Section 4.2 below.
Sample 1
AutoNDA by SimpleDocs

Related to REQUIREMENTS FOR DRB MEMBERSHIP

  • Requirements for E- Bidders 3.1. For Individual/ Joint E-Bidders, the following documents shall be uploaded during online registration; 3.1.1. Copy of Identification Documents (both sides) 3.1.2. Evidence of deposit payment 3.2. For Agent acting for Individual/ Joint Online Bidders, the following documents shall be uploaded during online registration; 3.2.1. Copy of Identification Documents (both sides) of Individual/ Joint Online Bidder 3.2.2. Copy of Identification Documents (both sides) of Agent 3.2.3. Copy of letter of authorization to bid 3.2.4. Evidence of deposit payment 3.3. For Company, the following documents shall be uploaded during online registration: 3.3.1. Copy of Identification Documents (both sides) of the representative. 3.3.2. Copy of letter of authorization to bid under the Company’s Letter Head 3.3.3. Form 24; Form 44; Form 49 (or their equivalent forms under the Companies Act 2016)

  • Membership Requirements 5. Exclusions from the Bargaining Unit

  • SERVICE REQUIREMENTS FOR REFERRED CLIENTS A. Agent agrees to respond to any communications from a Referred Client within two (2) hours after receipt if such communication is received between 9:00am to 5:00pm local time. For communications received outside of these hours, Agent agrees to respond by 10:00am the next day. B. Agent agrees to update XXXX.xxx with status updates within 48 hours after initial communication with a Referred Client and upon every significant status change until closing or abandoned. Updates shall be made by Agent via email to xxxxxxxxxxxx@xxxx.xxx. C. Vacations or extended absences shall be reported, with length of pause, to XXXX.xxx via email to D. Agent will not add Referred Client to any email list or calling list without the express permission of Referred Client. E. Agent agrees XXXX.xxx has the right to survey the Referred Client at any time. F. If Agent is contacted by a Referred Client that Agent is unwilling or unable to assist, Agent shall direct such Referred Client back to XXXX.xxx for assistance and notify XXXX.xxx at xxxxxxxxxxxx@xxxx.xxx. G. Agent agrees that XXXX.xxx has no obligation to provide Agent with any number of referrals and that prospective clients are free to select the agent they wish to work with for any particular real estate transaction.

  • Please see the current Washtenaw Community College catalog for up-to-date program requirements Conditions & Requirements

  • Minimum Shipping Requirements for TIPS Sales Vendor shall ship, deliver, or provide ordered goods and services within a commercially reasonable time after acceptance of the order. If a delay in delivery is anticipated, Vendor shall notify the TIPS Member as to why delivery is delayed and provide an updated estimated time for completion. The TIPS Member may cancel the order if the delay is not commercially acceptable or not consistent with the Supplemental Agreement applicable to the order.

  • Minimum Site Requirements for TIPS Sales (when applicable to TIPS Sale). Cleanup: When performing work on site at a TIPS Member’s property, Vendor shall clean up and remove all debris and rubbish resulting from their work as required or directed by the TIPS Member or as agreed by the parties. Upon completion of work, the premises shall be left in good repair and an orderly, neat, clean and unobstructed condition. Preparation: Vendor shall not begin a project for which a TIPS Member has not prepared the site, unless Vendor does the preparation work at no cost, or until TIPS Member includes the cost of site preparation in the TIPS Sale Site preparation includes, but is not limited to: moving furniture, installing wiring for networks or power, and similar pre‐installation requirements. Registered Sex Offender Restrictions: For work to be performed at schools, Vendor agrees that no employee of Vendor or a subcontractor who has been adjudicated to be a registered sex offender will perform work at any time when students are, or reasonably expected to be, present unless otherwise agreed by the TIPS Member. Vendor agrees that a violation of this condition shall be considered a material breach and may result in the cancellation of the TIPS Sale at the TIPS Member’s discretion. Vendor must identify any additional costs associated with compliance of this term. If no costs are specified, compliance with this term will be provided at no additional charge. Safety Measures: Vendor shall take all reasonable precautions for the safety of employees on the worksite, and shall erect and properly maintain all necessary safeguards for protection of workers and the public. Vendor shall post warning signs against all hazards created by the operation and work in progress. Proper precautions shall be taken pursuant to state law and standard practices to protect workers, general public and existing structures from injury or damage. Smoking: Persons working under Agreement shall adhere to the TIPS Member’s or local smoking statutes, codes, ordinances, and policies.

  • Requirements for Transfer (a) This Warrant and the Warrant Shares shall not be sold or transferred unless either (i) they first shall have been registered under the Securities Act of 1933, as amended (the "Act"), or (ii) the Company first shall have been furnished with an opinion of legal counsel, reasonably satisfactory to the Company, to the effect that such sale or transfer is exempt from the registration requirements of the Act. (b) Notwithstanding the foregoing, no registration or opinion of counsel shall be required for (i) a transfer by a Registered Holder which is a corporation to a wholly owned subsidiary, parent or affiliate of such corporation, a transfer by a Registered Holder which is a partnership to a partner of such partnership or a retired partner of such partnership or to the estate of any such partner or retired partner, or a transfer by a Registered Holder which is a limited liability company to a member of such limited liability company or a retired member or to the estate of any such member or retired member, provided that the transferee in each case agrees in writing to be subject to the terms of this Section 4, or (ii) a transfer made in accordance with Rule 144 under the Act. (c) Each certificate representing Warrant Shares shall bear a legend substantially in the following form: "The securities represented by this certificate have not been registered under the Securities Act of 1933, as amended, and may not be offered, sold or otherwise transferred, pledged or hypothecated unless and until such securities are registered under such Act or an opinion of counsel satisfactory to the Company is obtained to the effect that such registration is not required." The foregoing legend shall be removed from the certificates representing any Warrant Shares, at the request of the holder thereof, at such time as they become eligible for resale pursuant to Rule 144(k) under the Act.

  • Minimum Condition and Warranty Requirements for TIPS Sales All goods quoted or sold through a TIPS Sale shall be new unless clearly stated otherwise in writing. All new goods and services shall include the applicable manufacturers minimum standard warranty unless otherwise agreed to in the Supplemental Agreement.

  • MEMBERSHIP REQUIREMENT 1. All employees covered by this Collective Agreement shall, as a condition of employment, become and remain members of the British Columbia Teachers’ Federation and the local(s) in the district(s) in which they are employed, subject to Article A.3.

  • CFR PART 200 Domestic Preferences for Procurements As appropriate and to the extent consistent with law, the non-Federal entity should, to the greatest extent practicable under a Federal award, provide a preference for the purchase, acquisition, or use of goods, products, or materials produced in the United States (including but not limited to iron, aluminum, steel, cement, and other manufactured products). The requirements of this section must be included in all subawards including all contracts and purchase orders for work or products under this award. For purposes of 2 CFR Part 200.322, “Produced in the United States” means, for iron and steel products, that all manufacturing processes, from the initial melting stag through the application of coatings, occurred in the United States. Moreover, for purposes of 2 CFR Part 200.322, “Manufactured products” means items and construction materials composed in whole or in part of non-ferrous metals such as aluminum, plastics and polymer-based products such as polyvinyl chloride pipe, aggregates such as concrete, class, including optical fiber, and lumber. Pursuant to the above, when federal funds are expended by ESC Region 8 and TIPS Members, Vendor certifies that to the greatest extent practicable Vendor will provide a preference for the purchase, acquisition, or use of goods, products, or materials produced in the United States (including but not limited to iron, aluminum, steel, cement, and other manufactured products). Does vendor agree? Yes

Draft better contracts in just 5 minutes Get the weekly Law Insider newsletter packed with expert videos, webinars, ebooks, and more!