Requirements for Occupancy Sample Clauses

Requirements for Occupancy. Subject to Section 8.12 herein, no building erected on the Lots or Blocks within the Plan shall be occupied until a Certificate of Inspection re: Readiness for Occupancy has been issued by the Municipality’s Chief Building Official and the said Certificate shall not be issued until: (a) A Certificate of Preliminary Acceptance has been issued for Stage 2 Works for the Phase of the Subdivision including the subject Lot or Block; (b) The roadway from the entrance of the Development to and including the lot or Block of which the building is a part, has received the base course asphalt; (c) The electrical distribution plant including street lights have been installed and approved by the Utility; (d) The traffic and street signs have been installed and approved by the Director of Infrastructure and Development; (e) Subject to Section 6.4 (c), the final grading of the Lot or Block is in conformity with the overall Lot Grading Plan or such variances therefrom as have been approved by the Municipality’s Chief Building Official pursuant to Section 6.4 (c); (f) The telephone lines, cable T.V. and gas mains have been installed and approved by the Director of Infrastructure and Development; and (g) The Developer agrees that the preceding requirements in this Section are in addition to and not in substitution for the requirements of the Ontario Building Code Act as amended and regulations thereunder with respect to certificates for occupancy.
AutoNDA by SimpleDocs
Requirements for Occupancy. No buildings erected on the lots or blocks within the Plan shall be occupied until a Certificate of Occupancy has been issued by the Town and this Certificate will not be issued until: a) The roadway from the entrance of the Subdivision to and including the block of which the building is a part, has received the full specified thickness of Granular "A" and first lift of asphalt. b) The water system and sewage system connections have been installed and approved by the Town or other agency having jurisdiction. c) The traffic, street lights, and street signs have been installed and approved by the Town. d) The unit has been identified with the street number in accordance with Town policy. e) A certificate has been given by the Developer's consulting engineer, Ontario Land Surveyor or alternate, that the building constructed and the final grading of the lot or block is in conformity with the overall grading plan or such variance there from has been approved by the Town. f) The plumbing, electrical work, and exterior finish have been completed, and a sufficient documentation has been provided by the Developer confirming the electrical distribution system, street lighting, telephone, cable tv., gas and similar private utilities have been installed.
Requirements for Occupancy. Subject to Section 8.11 herein, no building erected on the Lots or Blocks within the Plan shall be occupied until a Certificate of Inspection re: Readiness for Occupancy has been issued by the Town’s Chief Building Official and the said Certificate shall not be issued until: (a) Preliminary Acceptance has been granted for Stage 2 servicing for the phase of the Subdivision including the Lot or Block. (b) The traffic and street signs have been installed and approved by the Town’s Engineer. (c) Subject to Section 6.4 (c), the final grading of the Lot or Block is in conformity with the overall grading plan or such variances therefrom as have been approved by the Town’s Chief Building Official pursuant to Section 6.4 (c). (d) The telephone lines, cable T.V. and gas mains have been installed and approved by the Town’s Engineer. The Developer agrees that the preceding requirements in this Section are in addition to and not in substitution of the requirements of the Building Code Act, 1992, S.O. 1992, c.23, and any amendments thereto and regulations thereunder with respect to certificates for occupancy.
Requirements for Occupancy. No buildings erected on the lots or blocks within the Plan shall be occupied until a Certificate of Occupancy has been issued by the Township and this Certificate will not be issued until: a) The roadway from the entrance of the Subdivision to and including the block of which the building is a part, has received the full specified thickness of Granular "B" and Granular "A". b) The Hydro equipment, telephone lines, street lights, water system, and sewage system have been installed and approved by the Township or other agency having jurisdiction. c) The traffic and street signs have been installed and approved by the Township. d) A certificate has been given by the Developer's consulting engineer or Ontario Land Surveyor that the building constructed and the final grading of the lot or block is in conformity with the overall grading plan or such variance therefrom has been approved by the Township. e) The plumbing, electrical work, and exterior finish have been completed. It is agreed that a copy of this Clause shall be delivered by the Developer to each and every builder obtaining a building permit or any prospective purchaser of the dwelling for any lot on the said Plan.
Requirements for Occupancy. No dwelling unit or any part thereof erected on any of the Subdivision being serviced by the services referred to in Schedule "C" shall be occupied until so authorized by the Chief Building Official, and the services referred to in Schedule “C” have been installed, save and except for surface asphalt and boulevard sodding.

Related to Requirements for Occupancy

  • Ready for Occupancy For purposes of Section 1.3.2 of this Agreement, the Premises shall be deemed “Ready for Occupancy” upon the substantial completion of the Tenant Improvement Work. Subject to Section 4.2 below, the Tenant Improvement Work shall be deemed to be “substantially complete” upon the completion of the Tenant Improvement Work pursuant to the Approved Construction Drawings (as reasonably determined by Landlord), with the exception of any details of construction, mechanical adjustment or any other similar matter the non-completion of which does not materially interfere with Tenant’s use of the Premises.

  • Early Occupancy If Tenant occupies the Property prior to the Commencement Date, Tenant's occupancy of the Property shall be subject to all of the provisions of this Lease. Early occupancy of the Property shall not advance the expiration date of this Lease. Tenant shall pay Base Rent and all other charges specified in this Lease for the early occupancy period.

  • Substantial Completion 9.8.1 When the Contractor considers that the Work, or a designated portion thereof which has been accepted in writing to by the State, is substantially complete as defined in Subparagraph

  • Landlord’s Work Prior to the execution of the Lease, Landlord and Tenant have approved the detailed description of base, shell and core work for the Phase I Premises and Phase II Premises attached hereto as Exhibit B-1 (the “Base, Shell and Core Description”). Based upon and in conformity with the Base Shell and Core Description, Landlord shall cause its architect and engineers, at Landlord’s sole cost and expense, to prepare and deliver to Tenant, for Tenant’s approval, detailed specifications and engineered working drawings in CAD format, which shall include, without limitation, ADA path of travel, restroom locations and counts, exit lighting plans for the Phase I Work (the “Base Building Working Drawings”) by no later than June 1, 2019. Within seven (7) days after Tenant’s and Landlord’s receipt of the Base Building Working Drawings, Tenant and Landlord shall approve or disapprove the same, which approval shall not be unreasonably withheld; provided, however, that Tenant may only disapprove the Base Building Working Drawings to the extent such Base Building Working Drawings are inconsistent with the Base, Shell and Core Description and only if Tenant delivers notice thereof to Landlord within such seven (7) day period. If any specific changes proposed by Tenant to rectify any inconsistencies with the Base, Shell and Core Description are timely and properly proposed by Tenant, Landlord shall cause its architect and engineers to revise the Base Building Working Drawings to incorporate such revisions and submit the same for Tenant’s approval in accordance with the foregoing provisions, and the parties shall follow the foregoing procedures for approving the Base Building Working Drawings until the same are finally approved by Landlord and Tenant. Upon Landlord’s and Tenant’s approval of the Base Building Working Drawings, the same shall be referred to as the “Approved Working Drawings for Landlord’s Phase I Work”. Based upon and in conformity with the Base, Shell and Core Description, Landlord shall cause its architect and engineers, at Landlord’s sole cost and expense, to prepare and deliver to Tenant, for Tenant’s approval, detailed specifications and engineered working drawings in CAD format, which shall include, without limitation, ADA path of travel, restroom locations and counts, exit lighting plans for the Phase II Work (the “Phase II Base Building Working Drawings”) by no later than October 1, 2019. Within seven (7) days after Tenant’s and Landlord’s receipt of the Phase II Base Building Working Drawings, Tenant and Landlord shall approve or disapprove the same, which approval shall not be unreasonably withheld; provided, however, that Tenant may only disapprove the Phase II Base Building Working Drawings to the extent such Phase II Base Building Working Drawings are inconsistent with the Base, Shell and Core Description and only if Tenant delivers notice thereof to Landlord within such seven (7) day period. If any specific changes proposed by Tenant to rectify any inconsistencies with the Base, Shell and Core Description are timely and properly proposed by Tenant, Landlord shall cause its architect and engineers to revise the Phase II Base Building Working Drawings to incorporate such revisions and submit the same for Tenant’s approval in accordance with the foregoing provisions, and the parties shall follow the foregoing procedures for approving the Phase II Base Building Working Drawings until the same are finally approved by Landlord and Tenant. Upon Landlord’s and Tenant’s approval of the Phase II Base Building Working Drawings, the same shall be referred to as the “Approved Working Drawings for Landlord’s Phase II Work”. The improvements shown on the Approved Working Drawings for Landlord’s Phase I Work and the Approved Working Drawings for Landlord’s Phase II Work are hereby collectively referred to as “Landlord’s Work”. The Approved Working Drawings for Landlord’s Phase I Work and the Approved Working Drawings for Landlord’s Phase II Work are sometimes collectively referred to herein as the “Approved Working Drawings for Landlord’s Work”.

  • PARTIAL OCCUPANCY OR USE 9.9.1 The Owner may occupy or use any completed or partially completed portion of the Work at any stage when such portion is designated by separate agreement with the Contractor, provided such occupancy or use is consented to by the insurer as required under Paragraph 11.3.1.5, the surety, and authorized by public authorities having jurisdiction over the Project. Such partial occupancy or use may commence whether or not the portion is substantially complete, provided the Owner and Contractor have accepted in writing the responsibilities assigned to each of them for payments, retainage, if any, security, maintenance, heat, utilities, damage to the Work and insurance, and have agreed in writing concerning the period for correction of the Work and commencement of warranties required by the Contract Documents. When the Contractor considers a portion substantially complete, the Contractor shall prepare and submit a list to the Architect as provided under Paragraph 9.8.2. Consent of the Contractor to partial occupancy or use shall not be unreasonably withheld. 9.9.2 Immediately prior to partial occupancy or use, the Owner, Contractor and Architect shall jointly inspect the area to be occupied or portion of the Work to be used in order to determine and record the condition of the Work. 9.9.3 Partial occupancy or use of a portion or portions of the Work shall not constitute acceptance of Work not complying with the requirements of the Contract Documents.

  • Conditions of Occupancy The Resident may not occupy a Room, unless (i) the Resident is currently enrolled and maintaining status as a full- time student in good standing at the Institution; (ii) this Agreement is executed by all parties; (iii) all Residence Fees then due and payable are paid in full as stated in section 2.03; (iv) the Manager has designated a Room for the Resident and (v) the Resident meets any additional conditions to occupancy established by the Institution, including any vaccination conditions.

  • Certificate of Occupancy The Contractor’s obligation under the Contract is to install the Work in accordance with the Contract Documents, obtain the Certificate of Occupancy from the State Fire Marshal or his deputy, and forward it to the Design Professional as a part of the final close out procedures. The Design Professional’s obligation is to design the Work to comply with the applicable codes and to qualify for a Certificate of Occupancy.

  • Landlord Work Landlord shall, at Landlord’s sole cost and expense, concurrently with Tenant’s construction of the Tenant Improvements, remove the existing demising wall and construct a Building standard demising wall at the Expansion Premises, which shall include studs, acoustical insulation and dry wall ready for finish on the Tenant side only and any necessary penetrations, fire dampers and sound traps (collectively, the “Demising Wall”), which Demising Wall shall be adjacent to the Expansion Premises as set forth on Exhibit A to this Amendment (collectively, the “Landlord Work”). Tenant may not change or alter the Landlord Work. Landlord shall use commercially reasonable efforts to Substantially Complete the Landlord Work no later than forty-five (45) days after the Expansion Delivery Date. In addition, Landlord shall, at Landlord’s sole cost and expense, to the extent required in order to allow Tenant to obtain a certificate of occupancy, or its legal equivalent, for the Expansion Premises for general office use assuming a normal and customary office occupancy density, cause the Landlord Work and the Building Common Areas (including the Base Building restrooms on the seventh (7th) floor of the Building), to comply with applicable building codes and other governmental laws, ordinances and regulations related to handicap access, which were enacted and enforced as of the date of this Amendment. Because Landlord shall be constructing the Landlord Work concurrently with Tenant’s construction of the Tenant Improvements, there will be a certain “overlap” period pursuant to which both Landlord’s representatives, employees, vendors and contractors and Tenant’s representatives, employees, vendors and contractors may be present and performing work in a portion of the Premises. During any such “overlap” period(s) when both parties and/or their respective employees, vendors, contractors or consultants are concurrently performing work in, or accessing, any portion of the Premises, neither party shall unreasonably interfere with or delay the work of the other party and/or its contractors or consultants, and both parties shall mutually coordinate and cooperate with each other, and shall cause their respective employees, vendors, contractors, and consultants to work in harmony with and to mutually coordinate and cooperate with the other’s employees, vendors, contractors and consultants, respectively, to minimize any interference or delay by either party with respect to the other party’s work. In addition, Landlord shall, and shall cause the other Landlord Parties to, use commercially reasonable efforts to minimize any interference with Tenant’s operations in the Existing Premises. Landlord shall have no obligation to move any furniture or other personal property of Tenant in the performance of Landlord Work. Tenant hereby agrees that the construction of the Landlord Work shall in no way constitute a constructive eviction of Tenant nor entitle Tenant to any abatement of rent. Except as otherwise expressly provided in the Lease (including this Tenant Work Letter), Landlord shall have no responsibility or for any reason be liable to Tenant for any direct or indirect injury to or interference with Tenant’s business arising from the Landlord Work, nor shall Tenant be entitled to any compensation or damages from Landlord for loss of the use of the whole or any part of the Premises or of Tenant’s personal property or improvements resulting from the Landlord Work or Landlord’s actions in connection with the Landlord Work, or for any inconvenience or annoyance occasioned by the Landlord Work or Landlord’s actions in connection with the Landlord Work.

  • Completion of Improvements Within 90 days of completion of any construction herein permitted, Company will cause to be prepared and delivered to Authority record documents as required under the Tenant Work Permit process, including but not limited to as-builts, legal descriptions, boundary surveys, and certified final cost of construction. The submission of record document electronic media will be in accordance with Authority’s Standard Procedure for computer aided design and drafting and drawings, as may be revised from time to time.

  • Licence to Occupy Premises A5.1 Any land or Premises made available to the Contractor by the Authority in connection with the Contract, shall be made available to the Contractor on a non-exclusive licence basis free of charge and shall be used by the Contractor solely for the purpose of performing its obligations under the Contract. The Contractor shall have the use of such land or Premises as licensee and shall vacate the same on completion, termination or abandonment of the Contract.

Draft better contracts in just 5 minutes Get the weekly Law Insider newsletter packed with expert videos, webinars, ebooks, and more!