SECTION INCLUDES. A. Submittals Required B. Owner’s Responsibilities C. Construction Manager’s Responsibilities
SECTION INCLUDES. A. Work under this section includes, but is not limited to piping, valves, pumps, generators and appurtenances for a complete sanitary sewer collection system associated with pressure sewer.
SECTION INCLUDES. All work necessary for the removal and disposal of structures, foundations, piping, equipment and roadways, or any part thereof including masonry, steel, reinforced concrete, plain concrete, electrical facilities, and any other material or equipment shown or specified to be removed.
B. Basic Procedures and Schedule: Carry out demolition so that adjacent structures, which are to remain, are not endangered. Schedule the work so as not to interfere with the day-to-day operation of the existing facilities. Do not block doorways or passageways in existing facilities.
C. Additional Requirements: Provide dust control and make provisions for safety.
D. Related Work Specified in Other Sections Includes: 1. Section 01045 - Connection to Existing Systems
SECTION INCLUDES. The work of this contract consists of the furnishing of all labor, equipment, materials and devices required in conjunction with the installation of supports for all Mechanical, Electrical and Plumbing and Gas piping or conduit, HVAC Air Ducts and HVAC Equipment. Manufacturer must supply 100% molded recycled rubber curbs.
SECTION INCLUDES. A. Work covered by the Contract, listing of Owner, Project location, Engineer. Sequence requirements, the Contractor’s use of the premises and Owner’s occupancy requirements.
SECTION INCLUDES. 1. All requirements for usage, maintenance, repair, and monitoring of the Clean Fill Disposal Site.
SECTION INCLUDES. A. The work of this contract consists of the furnishing of all labor, equipment, materials and devices required in conjunction with the installation of supports for all Mechanical, Electrical and Plumbing piping or conduit, HVAC Air Ducts and HVAC Equipment.
B. Manufacturer must supply a 17" circular base, injected molded polypropylene, with 227 sq. in. of surface on bottom, designed for weight disbursement.
C. Manufacturer must supply Vibration Isolation and Cushion system with a minimum of shock transmission to the roofing surface to allow free movement with no pipe tension or binding.
SECTION INCLUDES. A. The Uniform General and Supplementary Conditions (UGSC) specify that the Owner through the Owner’s Designated Representative (ODR) can modify the construction contract.
SECTION INCLUDES. A. General Requirements and Qualifications for Owner's Quality Assurance Testing.
B. Below Grade Inspections.
C. Concrete Inspections.
D. Wall Closure and Above Ceiling Inspections.
E. Pre-final Inspection.
F. Final Inspection G. Final Acceptance H. One Year Inspection.
SECTION INCLUDES. A. Work under this section includes furnishing and the installation of finish and security hardware specified herein and noted on drawings for a complete and operational system, including any electrified door hardware components including finish and security hardware and auto operators for entrance doors. Items include, but are not limited to:
1. Hinges/Continuous Hinges
2. Flush Bolts
3. Exit Devices
4. Locksets and Cylinders 5. Push Plates - Pulls
