Specialized Skills Each certificated support person demonstrates in his/her performance a competent level of skill and knowledge in designing and conducting specialized programs of prevention, instruction, remediation and evaluation.
Recommended language skills The sending institution, following agreement with the receiving institution, is responsible for providing support to its nominated candidates so that they can have the recommended language skills6 at the start of the mobility period (see also section 5 “Preparation and Support”). Student Mobility Staff Mobility CZ BRNO05 Czech English B2 for Czech B2 for English B2 for Czech B2 for English Beirut English C1 C1 For more details on the language of instruction recommendations, see the course catalogue of each institution. The links to the course catalogue are provided in the first section.
SKILLED TRADES Note: The provisions of the Collective Agreement shall apply to the skilled trades except as altered by the provisions of this Article. 30.01 Skilled trade classifications for the purpose of this Collective Agreement will be as follows: 30.02 Seniority shall be by skilled trade classification, that is classifications will be non-interchangeable. 30.03 Employees entering a skilled trade classification shall have a seniority date as of the entry into such classification (including the apprenticeship period if such period was served in the Company). 30.04 A non-skilled trades (i.e. production) employee will not exercise his or her seniority rights in any skilled trade classification, nor will any skilled trades employee exercise seniority in any production classification after the date of ratification except as set forth in Article 31.07(d). 30.05 In the event that a skilled trades employee (i.e. apprentice or journeyman) is unable to perform his or her job as defined in Article 18, the provisions of Article 18 will apply. In no event will these provisions contravene the Human Rights Code. 30.06 The term 'journeyman' as used in this Article shall mean any person: (a) Who presently is in a skilled trades classification; or (b) Who has served a bona fide apprenticeship and has a certificate which substantiates his/her claim of such service; or (c) Who has had eight (8) years of practical experience and can prove same with proper affidavits. The Company will consider the possession of a CAW/UAW journeyman/woman card as presumptive proof of qualifications. 30.07 In the event of a reduction in the work force of any skilled trades classification, the following procedure will apply: (a) First, probationary journeyman within a classification shall be laid off; (b) Second, apprentices within a classification shall be laid off based upon the first to go will be the last who entered the program; (c) Third, if further reductions in a skilled trades classification are required, journeyman shall, in reverse order of seniority (junior employee first) in such a classification, be laid off. (d) In the event of a layoff, skilled trades journeyperson employees will be allowed one time only to displace production employees, provided that such skilled trades journeyperson employees are originally production employees and in accordance with Article 14 of this Agreement. Skilled trades journeyperson employees must return to their skilled trades jobs as soon as they are recalled. (e) In the event of the disqualification of an apprentice, he/she will be allowed, one time only, to displace a production employee, provided that such apprentice was originally a production employee and in accordance with Article 14 of this Agreement. 30.08 In the event that there is an increase in any skilled trade classification, recall shall be made in reverse order of seniority, commencing with journeyman then 30.09 In the event the Company acquires some advanced type of machinery or equipment that would call for special servicing by skilled trades employees, it is agreed that the skilled trades employees will be trained so that they may become familiar with the necessary repair and maintenance techniques required. In the case of initial installations of new equipment, processes, technology and warranty work, the Company will involve a minimum of one (1) skilled trades employee of each affected trade with the supplier's on-site personnel for training purposes. 30.10 (1) The Company and Union recognize the importance of the following principles: (i) The Company recognizes the Union's desire to perform all Skilled Trades work covered under the jurisdiction of this contract except as amended below. (ii) The Company will not use subcontracting as a method of eliminating overtime for Skilled Trade employees (iii) The parties recognize that where the Company meets its obligations as set forth in Article 31 (including overtime opportunities), there shall be no additional responsibility on the part of the Company to pay additional overtime to any other employee. However, where it is alleged that the Company has not met its obligations under Article 31, the employee concerned and/or Union shall have the right to seek redress under the grievance procedure.
Commercially Useful Function A prime consultant can credit expenditures to a DBE subconsultant toward DBE goals only if the DBE performs a Commercially Useful Function (CUF). A DBE performs a CUF when it is responsible for execution of the work of a contract and carries out its responsibilities by actually performing, managing, and supervising the work involved. To perform a commercially useful function, the DBE must also be responsible, with respect to materials and supplies on the contract, for negotiating price, determining quality and quantity, ordering the material, and installing (where applicable) and paying for the material itself that it uses on the project. To determine whether a DBE is performing a commercially useful function, the Department will evaluate the amount of work subcontracted, industry practices, whether the amount the firm is to be paid under the contract is commensurate with the work it is actually performing and the DBE credit claimed for its performance of the work, and other relevant factors. A DBE will not be considered to perform a commercially useful function if its role is limited to that of an extra participant in a transaction, contract, or project through which funds are passed in order to obtain the appearance of DBE participation. In determining whether a DBE is such an extra participant, the Department will examine similar transactions, particularly those in which DBEs do not participate. If a DBE does not perform or exercise responsibility for at least 30 percent of the total cost of its contract with its own work force, or if the DBE subcontracts a greater portion of the work of a contract than would be expected on the basis of normal industry practice for the type of work involved, the Department will presume that the DBE is not performing a commercially useful function. When a DBE is presumed not to be performing a commercially useful function as provided above, the DBE may present evidence to rebut this presumption. The Department will determine if the firm is performing a CUF given the type of work involved and normal industry practices. The Department will notify the consultant, in writing, if it determines that the consultant’s DBE subconsultant is not performing a CUF. The consultant will be notified within seven calendar days of the Department’s decision. Decisions on CUF may be appealed to the ADOT State Engineer. The appeal must be in writing and personally delivered or sent by certified mail, return receipt requested, to the State Engineer. The appeal must be received by the State Engineer no later than seven calendar days after the decision of XXXX. XXXX’s decision remains in place unless and until the State Engineer reverses or modifies BECO’s decision. ADOT State Engineer will promptly consider any appeals under this subsection and notify the consultant of ADOT’s State Engineer findings and decisions. Decisions on CUF matters are not administratively appealable to USDOT. The BECO may conduct project site visits on the contract to confirm that DBEs are performing a CUF. The consultant shall cooperate during the site visits and the BECO’s staff will make every effort not to disrupt work on the project.
Technical and Organizational Measures The following sections define SAP’s current technical and organizational measures. SAP may change these at any time without notice so long as it maintains a comparable or better level of security. Individual measures may be replaced by new measures that serve the same purpose without diminishing the security level protecting Personal Data.
Abuse, Neglect, Exploitation Grantee will; a. take all steps necessary, to protect the health, safety and welfare of its clients and participants. b. develop and implement written policies and procedures for abuse, neglect and exploitation. c. notify appropriate authorities of any allegations of abuse, neglect, or exploitation as required by 25 TAC § 448.703.
Technical and Organisational Measures The Supplier shall, taking into account the state of technical development and the nature of Processing, implement and maintain appropriate technical and organisational measures to protect the Personal Data against unauthorised or unlawful Processing, destruction or accidental loss, alteration, or unauthorised disclosure of the Personal Data.
Inherently Religious Activities Grantee may not use grant funding to engage in inherently religious activities, such as proselytizing, scripture study, or worship. Grantees may engage in inherently religious activities; however, these activities must be separate in time or location from the grant- funded program. Moreover, grantees must not compel program beneficiaries to participate in inherently religious activities. These requirements apply to all grantees, not just faith-based organizations.
Regulatory Activities Beginning on the Effective Date and to the extent UGNX remains the Lead Development Party with respect to a particular territory, subject to and in accordance with the terms and conditions of this Agreement and the requirements of Applicable Laws, UGNX, shall: (a) use Commercially Reasonable Efforts to file (or have filed) all Regulatory Filings with respect to the Licensed Products in the Field in order to obtain Marketing Approvals in each country in the Territory and the European Territory (or to obtain the European Centralized Approval in the European Core Territory) and in order to obtain Pricing and/or Reimbursement Approvals in the Profit Share Territory; (b) respond in a timely fashion to requests for data and information from Regulatory Authorities with respect to the Licensed Products in the Field in the Territory and the European Territory; and (c) meet with officials of the Regulatory Authorities at such times as may be requested by such Regulatory Authorities with respect to the Core Development Activities (“Regulatory Activities”), provided that KHK will have primary responsibility for obtaining, and UGNX shall provide all assistance reasonably requested by KHK, in relation to Pricing and/or Reimbursement Approvals for the Licensed Products in the Field in the European Territory. For the avoidance of doubt, UGNX will be responsible for obtaining, and KHK will provide all assistance reasonably requested by UGNX, in relation to Pricing and/or Reimbursement Approvals, if any, for the Licensed Products in the Field in the Profit Share Territory as part of the UGNX Core Development Activities, it being understood that the costs incurred by UGNX in connection with such activities will be shared equally (50/50). All such Regulatory Activities will be conducted in a manner consistent with the Core Development Plan and coordinated by the JSC in accordance with Article 3. Without limiting the applicability of the foregoing and the remainder of this Article 5, UGNX shall interface with the applicable Regulatory Authority(ies) and, through the JDC, shall keep KHK reasonably informed of all material events and developments occurring in the course of the Regulatory Activities, including scheduled UGNX regulatory strategy discussions and meetings with Regulatory Authorities in the Territory and the European Territory relating to the Licensed Products in the Field.
Degree A recognised degree from a higher education institution, often completed in three or four years, and sometimes combined with a one year diploma.
