Transition to Customer Manufacturing Sample Clauses

Transition to Customer Manufacturing. (a) The Parties acknowledge that the arrangements contemplated by this Agreement are intended to be temporary in nature and, subject to ARTICLE 8, last (i) with respect to the appointment of RJRT as the manufacturer of Imperial’s requirements for the RJRT Products, for such time as anticipated in the Imperial Migration Plan, or if later, until such time as Imperial, in its reasonable judgment, has determined that it is prepared and capable of manufacturing (or having manufactured) the RJRT Products on its own, and (ii) with respect to the appointment of Imperial as the manufacturer of RJRT’s requirements for the Lorillard Products, for such time as anticipated in the RJRT Migration Plan, or if later, until such time as RJRT, in its reasonable judgment, has determined that it is prepared and capable of manufacturing (or having manufactured) the Lorillard Products on its own (each, a “Manufacturing Migration”). Each Customer will use its commercially reasonable efforts to effect a Manufacturing Migration, and each Manufacturer agrees to reasonably cooperate with its Customer to facilitate such Customer’s Manufacturing Migration, in each case, in accordance with the RJRT Migration Plan or the Imperial Migration Plan, as the case may be, unless otherwise agreed in writing between the Parties. (b) Each Manufacturer agrees to maintain the Migration Machinery (and all components thereof) in its possession or control in good, clean, safe and hygienic condition and repair in the ordinary course of business (subject only to normal wear and tear); provided that, if a Manufacturer reasonably expects to incur maintenance or repair costs in excess of ***** with respect to any particular maintenance event (or during any period of 30 consecutive days), then (i) the Manufacturer will promptly notify its Customer thereof, including a reasonably-detailed description of the required maintenance and repairs, and (ii) within ten days after receipt of any such notice, the Customer may instruct the Manufacturer not to undertake all or any of the subject maintenance or repairs, but if the Customer fails to timely respond with any such instructions, then the Customer will be deemed to have approved such maintenance and repairs, as described in the Manufacturer’s notice. Notwithstanding anything to the contrary in this Agreement, if a Customer instructs its Manufacturer not to undertake maintenance or repairs pursuant to this Section 2.11(b) and, as a result, the subject Migration M...
Sample 1

Related to Transition to Customer Manufacturing

  • Manufacturing Services Patheon will perform the Manufacturing Services for Products to be distributed and sold by Client in the Territory for the fees specified in Schedules B and C to the relevant Product Agreement. Schedule B to each Product Agreement sets forth a list of cost items that are included in the Price for Products; all cost items that are not included in this list are excluded from the Price and are subject to additional fees to be paid by Client. Patheon may amend the fees set out in Schedules B and C to a Product Agreement as set forth in Article 4. Patheon will perform the Manufacturing Services solely at the Manufacturing Site, unless otherwise agreed in writing by Client. If the parties agree that Patheon will supply, and Client will purchase, at least a specified minimum percentage of Client’s requirements for a Product under a Product Agreement (the “Required Percentage”), then the applicable Product Agreement will set forth the Required Percentage and the time period during which the obligation will apply (the “Required Period”). But this obligation (if any) will cease to apply to Client with respect to the Product if Patheon fails to remain in material compliance with its obligations under this Agreement or the applicable Product Agreement, or Patheon suspends performance under this Agreement or the applicable Product Agreement in connection with a Force Majeure Event or where Patheon is or will be prevented from supplying the Product as a result of the action of a Regulatory Authority. Subject to its obligation (if any) to purchase the Required Percentage of a Product during the Required Period, Client may, at any time, obtain Product from a third party or may, at any time, qualify a third party to perform Manufacturing Services for the Product. In performing the Manufacturing Services, Patheon and Client agree that:

  • License to Customer Vendor grants to Customer, a perpetual, irrevocable, royalty free license, solely for the Customer’s internal business purposes, to use, copy, modify, display, perform (by any means), transmit and prepare derivative works of any Vendor IP embodied in or delivered to Customer in conjunction with the Work Product. The foregoing license includes the right to sublicense third parties, solely for the purpose of engaging such third parties to assist or carryout Customer’s internal business use of the Work Product. Except for the preceding license, all rights in Vendor IP remain in Vendor.

  • Manufacturing (a) The Supplier shall without limitation be responsible, at no additional cost to the Purchaser, for: sourcing and procuring all raw materials for the Products; obtaining all necessary approvals, permits and licenses for the manufacturing of the Products; providing sufficient qualified staff and workers to perform the obligations under this Purchase Agreement; implementing and maintaining effective inventory and production control procedures with respect to the Products; and handling other matters as reasonably requested by the Purchaser from time to time. (b) The Supplier shall not change any process, material, component, packaging or manufacturing location without the Purchaser’s express prior written approval.

  • Customer Cooperation 3.2.1. Customer shall provide and make available all Customer personnel as may be further addressed in an applicable Order Form or that SAP reasonably requires in connection with performance of the Services. 3.2.2. Customer shall appoint a contact person with the authority to make decisions and to supply SAP with any necessary or relevant information expeditiously.

  • Manufacturing and Supply (a) Depomed shall supply Product for use in conducting Depomed’s development activities for Product in the Field and in the Territory as set forth in Exhibit D. (b) During the four-year period beginning on the Effective Date (the “Supply Period”), Depomed shall supply and package (or have supplied and packaged) Product pursuant to this Section 4.8. Depomed will use commercially reasonable efforts to enter into a long-term Product supply agreement with [***] days after the Effective Date (the “Depomed Supply Agreement”) that will be freely assignable to Solvay or its Affiliates, successors or assigns at any time. In addition, Depomed and Solvay will negotiate and enter into a Product supply agreement with business terms substantially similar to the Depomed Supply Agreement concurrently with the execution and delivery by Depomed and [***] of the Depomed Supply Agreement (the “Solvay Supply Agreement”, and, together with the Depomed Supply Agreement, the “Supply Agreements”). The Supply Agreements will, together, contain the following provisions (among others mutually agreeable to the Parties): (i) Under the Solvay Supply Agreement, Depomed will agree to supply Solvay with its requirements of finished, packaged Product during the Supply Period; (ii) All manufacturing and records will be performed and maintained in accordance with specifications, cGMP and Applicable Law; (iii) Depomed will provide reasonable assistance to Solvay in the event Solvay wishes to qualify a backup Product manufacturer; (iv) Depomed shall [***]; (v) Solvay will pay Depomed the following amounts in connection with all activities performed by or on behalf of Depomed associated with Product manufacture and supply (other than activities specified on Exhibit D) (A) [***]% of Depomed’s out-of-pocket costs incurred in connection with such manufacture and supply of Product to Solvay, and (B) a labor charge equal to the FTE Charges for all Depomed employees allocated to the manufacture and supply of Product to Solvay, not to exceed FTE Charges for an aggregate of [***] during any given calendar quarter (and Depomed shall provide to Solvay periodic reports detailing the FTE Charges for which Solvay must pay Depomed hereunder);

  • Manufacturing Technology Transfer Except as the Committee ------------ --------------------------------- may otherwise agree in writing, in order to effectuate an orderly transition of the uninterrupted availability of Product to LILLY for purposes contemplated under this Agreement, MEGABIOS, at least ninety (90) days prior to completion of the Project or completion of Phase I Clinical Trials, whichever is earlier, shall transfer to LILLY all information and instructions concerning the manufacturing process and related matters in MEGABIOS' possession which may be necessary for LILLY to manufacture Product (including information regarding obtaining necessary Lipids related thereto) for clinical trials and commercialization as contemplated hereunder including, but not limited to, analytical and manufacturing methods. MEGABIOS shall also provide assistance (in the form of consultation) to LILLY with respect to manufacturing matters for a period of [ * ] months after completion of the initial transfer of information and instructions as provided below. Such transfer and assistance by MEGABIOS will be referred to herein as the "Manufacturing Transfer." All such information, methods and instructions transferred to LILLY under this Section 4.3 shall be referred to herein as the "Manufacturing Information," and shall be maintained in confidence by LILLY pursuant to Section 7.1, except that LILLY's obligation to maintain in confidence such Manufacturing Information shall survive for ten (10) years following expiration or termination of this Agreement. LILLY agrees that it will use all such transferred Manufacturing Information only for the manufacture of the Products and shall not disclose or transfer such Manufacturing Information to any third party manufacturer except as provided in Section 2.10. MEGABIOS shall provide, and bear its costs for, up to [ * ] FTEs for a period of up to [ * ] months [ * ] in aggregate) to accomplish the Manufacturing Transfer. Such FTEs, at LILLY's request, shall include visits to LILLY's facilities by MEGABIOS personnel including up to [ * ] from MEGABIOS' head of manufacturing. MEGABIOS shall furnish any additional reasonable assistance beyond the assistance described above regarding manufacturing matters that LILLY may request and that MEGABIOS is able to provide, for up to [ * ] after the initial transfer of Manufacturing Information, providing that LILLY [ * ] incurred with respect to such additional assistance.

  • Technical Support Services 2.1 The technical support services (the "Services"): Party A agrees to provide to Party B the relevant services requested by Party B, which are specified in Exhibit 1 attached hereto ("Exhibit 1").

  • TRANSPORT SERVICES Upon the conclusion of such multilateral negotiations, the Parties shall conduct a review for the purpose of discussing appropriate amendments to this Agreement so as to incorporate the results of such multilateral negotiations.

  • Routing for Operator Services and Directory Assistance Traffic For a Verizon Telecommunications Service dial tone line purchased by VarTec for resale pursuant to the Resale Attachment, upon request by VarTec, Verizon will establish an arrangement that will permit VarTec to route the VarTec Customer’s calls for operator and directory assistance services to a provider of operator and directory assistance services selected by VarTec. Verizon will provide this routing arrangement in accordance with, but only to the extent required by, Applicable Law. Verizon will provide this routing arrangement pursuant to an appropriate written request submitted by VarTec and a mutually agreed-upon schedule. This routing arrangement will be implemented at VarTec's expense, with charges determined on an individual case basis. In addition to charges for initially establishing the routing arrangement, VarTec will be responsible for ongoing monthly and/or usage charges for the routing arrangement. VarTec shall arrange, at its own expense, the trunking and other facilities required to transport traffic to VarTec’s selected provider of operator and directory assistance services.

  • Uncovering and Correction of Work 12.1 The Contractor shall promptly correct Work rejected by the Owner or failing to conform to the requirements of the Contract Documents, whether observed before or after Substantial Completion and whether or not fabricated, installed or completed, and shall correct any Work found to be not in accordance with the requirements of the Contract Documents within a period of two years from the date of Substantial Completion, or by terms of an applicable special warranty required by the Contract Documents. The provisions of this Article apply to work done by Subcontractors as well as to Work done by direct employees of the Contractor. 12.2 At any time during the progress of the work, or in any case where the nature of the defects shall be such that it is not expedient to have them corrected, the Owner, at their option, shall have the right to deduct such sum, or sums, of money from the amount of the contract as they consider justified to adjust the difference in value between the defective work and that required under contract including any damage to the structure.