Approved Maintenance Organization definition

Approved Maintenance Organization means an organization approved/accepted/validated by CAA Nepal, in accordance with NCAR Part-145 or NCAR Chapter D.1 as applicable, to perform maintenance of aircraft, engine, propeller or parts thereof and operating under supervision of CAA Nepal.
Approved Maintenance Organization means an organization approved by a Contracting State, in accordance with the requirements of Part I of Chapter 8 - Aeroplane Maintenance of Annex 6 of the Chicago Convention, to perform maintenance of aircraft or parts thereof and operating under supervision approved by that State;
Approved Maintenance Organization means an organization approved by a Contracting State, in accordance with the requirement of Part 1 of Chapter 8

Examples of Approved Maintenance Organization in a sentence

  • Costs covered by aircraft owner:• EASA fees for approval of P-FC• Costs related to cooperation with Approved Maintenance Organization other than aircraft manufacturer’s maintenance organization (preparation of data, fixtures, templates, etc.) All other costs for modifications are covered by aircraft manufacturer Aerospool spol.

  • This applies whether or not the applicant for an AOC also intends to apply for approval as an Approved Maintenance Organization (AMO) or intends to contract out maintenance to an AMO as per NCAR Chapter 145.

  • All Completion Services shall be performed at Contractor's certificated repair station approved by Federal Aviation Administration (FAA) under Federal Aviation Regulation 14 C.F.R Part 145; certificated Approved Maintenance Organization (AMO) approved by Transport Canada under Canadian Aviation Regulation, Part V, subpart 73; or at a facility approved by the LASD Aero Bureau.

  • This matrix is for information only and is provided to assist in the comparison of 14 CFR part 145 repair station and SAR-145 Approved Maintenance Organization (AMO) ratings for proper alignment under the Maintenance Implementation Procedures (MIP).

  • Note: The purpose of the Approved Maintenance Organization Procedures Manual is to set forth the procedures, the means.

  • This includes resources required for approving and monitoring of continued compliance of aircraft owners, Operators, M.A. Subpart F Approved Maintenance Organization, M.A. Subpart G Continuing Airworthiness Management Organization, NCAR Part-145 Approved Maintenance Organization and NCAR Part-147 Approved Training organization.

  • In either case, the Approved Maintenance Organization (AMO) must always retain at its primary place of operation a current copy of this FAA Supplement in the English language and provide it to the FAA upon request.

  • The aim of this framework agreement is to supply the spare material of any component or element of the specific standard or optional equipment required for the Textron Group (BEECHCRAFT C90A, BEECHCRAFT A100, BEECHCRAFT B200, BEECHCRAFT B300 and CESSNA 500/550), necessary to perform the maintenance tasks in the Approved Maintenance Organization Part 145 of SENASA and within the scope approved by the Aeronautical Authority.

  • The Contractor must be a TC or FAA approved maintenance organization for the scope of work required and must maintain the applicable Transport Canada Approved Maintenance Organization (AMO) certification or FAA Approved Repair Station Certification.

  • Reference may be made to Regulation 16 of the Civil Aviation (Approved Maintenance Organization) Regulations.


More Definitions of Approved Maintenance Organization

Approved Maintenance Organization means a maintenance facility approved by the Aeronautics Authority and also by the FAA pursuant to FAR Part 145 and/or the EASA pursuant to EASA Part-145 for the performance of maintenance, testing, inspection, repair, overhaul or modification on the Aircraft or any Item of Equipment.
Approved Maintenance Organization means an organization approved to perform specific aircraft maintenance activities by the Authority;
Approved Maintenance Organization means an organization approved by a Contracting State, in accordance with the requirements of ICAO Annex 8, Part II, Chapter 6Maintenance Organization Approval, to perform maintenance of aircraft, engine, propeller or parts thereof and operating under supervision approved by that State;
Approved Maintenance Organization means a maintenance organization approved pursuant to the United States Aviation Regulations.
Approved Maintenance Organization means a maintenance organization approved pursuant to the Maltese Regulations.
Approved Maintenance Organization means a natural person or a legal person holding an AMO Certificate that entitles them to release maintenance performed on any aircraft or aeronautical accessory for which they are approved.

Related to Approved Maintenance Organization

  • Health maintenance organization means that term as defined in section 3501 of the insurance code of 1956, 1956 PA 218, MCL 500.3501.

  • Planned Maintenance means any Maintenance BT has planned to do in advance.

  • Maintenance Adder means an adder that may be included to account for variable operation and maintenance expenses in a Market Seller’s Fuel Cost Policy. The Maintenance Adder is calculated in accordance with the applicable provisions of PJM Manual 15, and may only include expenses incurred as a result of electric production.

  • Major maintenance means the adjustment, repair or replacement of a component or module that could affect the accuracy of a measurement.

  • Industrial maintenance coating means a high performance architectural coating, including primers, sealers, undercoaters, intermediate coats, and topcoats formulated for application to substrates, including floors, exposed to one or more of the following extreme environmental conditions listed below and labeled “For industrial use only;” “For professional use only;” “Not for residential use;” or “Not intended for residential use.”

  • maintenance order , in relation to a court, means an order made by a court —

  • Support and Maintenance Services means the support and maintenance services described in Section 1 of these Support Terms.

  • Maintenance Manual shall have the meaning ascribed to it in Clause 10.7; “Maintenance Programme” shall have the meaning set forth in Clause 14.3; “Maintenance Period” shall have the meaning set forth in Clause 14.1; “Maintenance Requirements” shall have the meaning set forth in Clause14.2;

  • Operation and Maintenance or “O&M” shall mean all activities required to operate, maintain, and monitor the effectiveness of the RA as specified in the SOW or any EPA-approved O&M Plan.

  • Maintenance area means any geographic region of the United States previously designated nonattainment pursuant to the CAA Amendments of 1990 and subsequently redesignated to attainment subject to the requirement to develop a maintenance plan under Section 175A of the CAA, as amended.

  • Maintenance and Support Services means the services provided by Contractor under Appendix F.

  • Fire hazard means any situation, process, material or condition which may cause a fire or explosion or provide a ready fuel supply to increase the spread or intensity of the fire or explosion and which poses a threat to life or property;

  • Managed care organization means an entity that (1) is under contract with the department to provide services to Medicaid recipients and (2) meets the definition of “health maintenance organization” as defined in Iowa Code section 514B.1.

  • Managed Care Organization (MCO) means a contracted health delivery system providing capitated or prepaid health services, also known as a Prepaid Health Plan (PHP). An MCO is responsible for providing, arranging, and making reimbursement arrangements for covered services as governed by state and federal law. An MCO may be a Chemical Dependency Organization (CDO), Dental Care Organization (DCO), Mental Health Organization (MHO), or Physician Care Organization (PCO).

  • Generator Maintenance Outage means the scheduled removal from service, in whole or in part, of a generating unit in order to perform necessary repairs on specific components of the facility, if removal of the facility meets the guidelines specified in the PJM Manuals.

  • Routine maintenance means actions performed on a regular or controllable basis or in response to uncontrollable events upon a highway, road, street, or bridge. Routine maintenance includes, but is not limited to, 1 or more of the following:

  • Retail Service and Maintenance Sector Means the service and maintenance of retail facilities which includes financial institutions, retail businesses, schools and hospitals but does not include commercial premises as defined.

  • Provider Organization means a group practice, facility, or organization that is:

  • Emergency Maintenance means any period of maintenance for which, due to reasons beyond its reasonable control, Sprint Convergence is unable to provide prior notice of.

  • Operation and Maintenance Costs means the costs of:

  • Scheduled Maintenance means any adjustment, repair, removal, disassembly, cleaning, or replacement of components or systems required by the manufacturer which is performed on a periodic basis to prevent part failure or equipment or engine malfunction, or anticipated as necessary to correct an overt indication of malfunction or failure for which periodic maintenance is not appropriate.

  • Preferred Provider Organization (PPO) means a health insurance issuer's or carrier's insurance policy that offers covered health care services provided by a network of providers who are contracted with the issuer or carrier (“in-network”) and providers who are not part of the provider network (“out-of-network”).

  • Credit union service organization means an organization, corporation, or association whose membership or ownership is primarily confined or restricted to credit unions or organizations of credit unions and whose purpose is primarily designed to provide services to credit unions, organizations of credit unions, or credit union members.

  • Maintenance Outage means a time period during which Seller plans to reduce the Power Output of the Power Product, in full or in part, in order to facilitate maintenance work on the Generating Facility, other than a Major Overhaul.

  • Maintenance Requirements shall have the meaning set forth in Clause 14.2;

  • Maintenance Supervisor (Tradesperson) means an employee who has trade qualifications and has overall responsibility for maintenance at the place of employment and may be required to supervise other maintenance staff.