Examples of Elongation in a sentence
Elongation : 11%6.2.3 All steel to be true to the Standard Specifications with regard to bend ability specially the hard grade deformed bars under 19 mm (3/4") dia.
Tensile strength and Elongation: - The velocity separation between the jaws of the testing machine when running idle shall be 13, per minute.
Check out roundness (ovality) Physical properties Tensile strength : Elongation : Hardness : Microstructure : Metallurgical Analysis: Dimensions : i.
Elongation : 11%2.3 All steel to be true to the Standard Specifications with regard to bend ability specially the hard grade deformed bars under 19 mm (3/4") dia.
Not recommended for extended outdoor use.Physical Properties Without Adhesive Caliper, inches 0.0026 +/- 10%ASTM D2103 Elongation, % (YIELD) 12 MD 45 CDASTM D1922 Tensile, lbs./in.
Material Test Certificate giving chemical composition, physical properties such as ultimate tensile strength, Elongation %, yield strength, hardness of finished product etc.
Performance properties shall be as follows:− Density : 1.65 kg/litre ( adhesive) 1.50 kg/m2 (hypalon Lmm)− Service Temperature : -300C to + 700C− Bond strength to concrete: Dry or Damp = -4N/mm2 ( concrete failure)− Tensile Strength : -6N/mm2− Peel Strength : -4.5 N/mm2− Elongation : > 400% Waterproof MembraneWaterproof membrane shall be self-adhering sheet membrane consisting of rubber modified asphalt compound such as Bituthene 1000 coated to one side of a polyethylene film.
Units Value Tensile strength (at Yield) [***] [***] [***] Tensile Elongation [***] [***] [***] Flexural strength [***] [***] [***] Flexural modulus [***] [***] [***] Notched impact strength [***] [***] [***] Density [***] [***] [***] DSC Tg (Onset) Tc (Recrystallistion) Tm (Melt) [***] [***] [***] Notes: [***] [***]...........................
Synthetic filter fabric shall be a pervious sheet of propylene, nylon, polyester or ethylene yarn and shall be certified by the manufacturer or supplier as conforming to the following requirements: Physical Property Requirements Filtering Efficiency 75% (min.) Tensile Strength at 20% Extra Strength - (max.) Elongation * 50 lbs./lin.
Elongation at Break (Specified Value: Maximum permissible variation of -25%) ParametersObserved ValueRemarksSample 1Sample 2abcabcLength at Break (mm) Elongation (%) Median Value (%) % Variation Parameters ParametersObserved valueRemarksSample 1Sample 2Quality Retention Rating Test at -400 C for 3 minutes, specified value: Non-brittle & no crack ParametersC.