Engineering assessment definition

Engineering assessment means best estimate of a vent stream parameter (e.g., flow rate, VOC concentration, VOC emission rate, net heating value, etc.) that includes, but is not limited to, the following:
Sample 1Sample 2Sample 3
Engineering assessment means engineering assessment as per CSA Z662. NEW Proposed addition to clarify terminology used in the Rules. Definition and clauses are available in CSA Z662.
Sample 1

Examples of Engineering assessment in a sentence

  • Use the appropriate parameters in table 3 to this subpart and calculate the TRE index value using equation 33 or 37 depending on whether the process vent is at a new or existing source.(i) Engineering assessment.

  • Engineering assessment may be used to estimate emissions from a batch emission episode only under the conditions described in paragraph (b)(6) of this section.

  • Engineering models created during a Base Level Engineering assessment are performed at a level of quality that meets the mapping Standards for Flood Risk Projects (FEMA Policy Memo FP 204-078-1) to produce technically credible Zone A (1% annual-chance flood) information.

  • Additional attachments may include (further described in this section):  Engineering assessment.

  • Engineering models are created during a Base Level Engineering assessment, producing information that meets the mapping Standards for Flood Risk Projects (FEMA Policy Memo FP 204-078-1) to produce Zone A (1-percent-annual-chance flood) information.

  • The project will perform Value Engineering assessment as part of the conceptual, preliminary and final design process to define the scope of work that would be affordable given the prescribed budget, the expertise of the participating sPHENIX institutions, funding sources and agreements with the various institutions.

  • Engineering assessment may be used to estimate organic HAP emissions from a batch emission episode only under the conditions described in paragraph (d)(6) of this section.

  • In a technical program such as a Bachelor of Science in Engineering, assessment occurs continuously based on how students perform.

  • The project team will also ask as to whether there is a recent Architecture and Engineering assessment available.

  • Engineering assessment shall be based on knowledge of standard analyses and operating experience, and on sound engineering judgment.

Related to Engineering assessment

  • Site Assessment means a Site Assessment as defined in Paragraph 10(c).

  • Phase I assessment as described in, and meeting the criteria of, (i) Chapter 5 of the FNMA Multifamily Guide or any successor provisions covering the same subject matter in the case of a Specially Serviced Mortgage Loan as to which the related Mortgaged Property is multifamily property or (ii) the American Society for Testing and Materials in the case of Specially Serviced Mortgage Loan as to which the related Mortgaged Property is not multifamily property.

  • Geotechnical engineer means a Professional Engineer whose principal field of specialization is the design and Construction of earthworks in a permafrost environment.

  • conformity assessment means the process demonstrating whether the requirements of this Regulation relating to a device have been fulfilled;

  • Phase I Environmental Assessment A “Phase I assessment” as described in, and meeting the criteria of, the ASTM, plus a radon and asbestos inspection.

  • Environmental Impact Assessment means a systematic examination conducted to determine whether or not a programme, activity or project will have any adverse impacts on the environment;

  • Environmental Assessment means an assessment of the presence, storage or release of any hazardous or toxic substance, pollutant or contaminant with respect to the collateral securing a Shared-Loss Loan that has been fully or partially charged off.

  • Engineering means the application of scientific knowledge for the design, control, or use of building structures, equipment, or apparatus.

  • conformity assessment body means a body that performs conformity assessment activities including calibration, testing, certification and inspection;

  • Independent Engineering Report means a report, in form and substance satisfactory to the Administrative Agent and each of the Lenders, prepared by an Independent Engineer, addressed to the Administrative Agent and the Lenders with respect to the Oil and Gas Properties owned by the Borrower or its Subsidiaries (or to be acquired by the Borrower or any of its Subsidiaries, as applicable) which are or are to be included in the Borrowing Base, which report shall (a) specify the location, quantity, and type of the estimated Proven Reserves attributable to such Oil and Gas Properties, (b) contain a projection of the rate of production of such Oil and Gas Properties, (c) contain an estimate of the net operating revenues to be derived from the production and sale of Hydrocarbons from such Proven Reserves based on product price and cost escalation assumptions specified by the Administrative Agent and the Lenders, and (d) contain such other information as is customarily obtained from and provided in such reports or is otherwise reasonably requested by the Administrative Agent or any Lender.

  • Impact Assessment has the meaning given to it in Clause 22.1.3 (Variation Procedure);

  • Needs assessment means a study or statistical analysis that examines the need for ground ambulance service within a service area or proposed service area that takes into account the current or proposed service area’s medical, fire, and police services.

  • Engineering Report means either an Independent Engineering Report or an Internal Engineering Report.

  • Architect/Engineer (A/E means a person registered as an architect pursuant to Tex. Occ. Code Ann., Ch. 1051, as a landscape architect pursuant to Tex. Occ. Code Ann., Ch. 1052, a person licensed as a professional engineer pursuant Tex. Occ. Code Ann., Ch. 1001, and/or a firm employed by Owner or Design-Build Contractor to provide professional architectural or engineering services and to exercise overall responsibility for the design of a Project or a significant portion thereof, and to perform the contract administration responsibilities set forth in the Contract.

  • Risk assessment means a programme to determine any risk associated with any hazard at a construction site , in order to identify the steps needed to be taken to remove, reduce or control such hazard;

  • Environmental Site Assessment means a Phase I environmental report meeting the requirements of the American Society for Testing and Materials, and, if in accordance with customary industry standards a reasonable lender would require it, a Phase II environmental report, each prepared by a licensed third party professional experienced in environmental matters.

  • Preliminary assessment means the first phase in the process of identifying areas of concern and determining whether contaminants are or were present at a site or have migrated or are migrating from a site, and shall include the initial search for and evaluation of, existing site specific operational and environmental information, both current and historic, to determine if further investigation concerning the documented, alleged, suspected or latent discharge of any contaminant is required. The evaluation of historic information shall be conducted from 1932 to the present, except that the department may require the search for and evaluation of additional information relating to ownership and use of the site prior to 1932 if such information is available through diligent inquiry of the public records.

  • Phase I means the first part of the tuition incentive assistance program defined as the academic period of 80 semester or 120 term credits, or less, leading to an associate degree or certificate.

  • Engineering Reports has the meaning assigned such term in Section 2.07(c)(i).

  • Initial Engineering Report means the engineering report concerning Oil and Gas Properties of Loan Parties dated as of June 30, 2016, prepared internally by the Borrower.

  • Architect/Engineer means the person designated by the Commissioner to provide the Contract drawings and Detailed Specifications for the Work you are to perform.

  • self-assessment means an assessment made by a taxpayer or his representative under section 28;

  • Phase I Environmental Report means a report by an Independent Person who regularly conducts environmental site assessments in accordance with then current standards imposed by institutional commercial mortgage lenders and who has a reasonable amount of experience conducting such assessments.

  • Environmental Consultant has the meaning set forth in Section 5.17(a).

  • Phase II means the second part of the tuition incentive assistance program which provides assistance in the third and fourth year of 4-year degree programs.

  • Environmental Audit means, with respect to each Property, a Phase One environmental site assessment (the scope and performance of which meets or exceeds the then most current ASTM Standard Practice E1527 for Environmental Site Assessments: Phase One Environmental Site Assessment Process) of such Property.