Manual transmission definition

Manual transmission means a transmission where gears can only be shifted by action of the driver.
Sample 1Sample 2Sample 3
Manual transmission means a transmission utilizing a driver-operated clutch that is activated by a pedal or lever and a gear-shift mechanism operated either by hand or by foot. All other transmissions, whether semi-automatic or automatic, will be considered automatic.
Sample 1Sample 2Sample 3
Manual transmission means a transmission where gears are shifted by hand in conjunction with a manual disengagement of a clutch.
Sample 1Sample 2Sample 3

Examples of Manual transmission in a sentence

  • According to the schedule set forth in the Business Practice Manual, transmission upgrades and additions with capital costs of $50 million or less can be approved by CAISO management and may proceed to permitting and construction prior to Governing Board approval of the plan.

  • According to the schedule set forth in the Business Practice Manual, transmission solutions with capital costs of $50 million or less can be approved by CAISO management and may proceed to permitting and construction prior to Governing Board approval of the plan.

  • Manual transmission fluidFor specific application advice see appropriate Technical Data Sheet or consult our company representative.

  • Manual transmission clutches are to remain engaged during all maneuvers.

  • Or In the event of immobilisation of the insured vehicle for more than 4 hours, Suzuki Assistance will organise and pay for a temporary replacement vehicle (Group C: Manual transmission - Seats: 5 - Engine Size: 1400 cc), during the time that the vehicle is being repaired, for a maximum period of 2 days.


More Definitions of Manual transmission

Manual transmission means a transmission utilizing a driver-operated clutch that is activated by a pedal or lever and a gearshift mechanism either operated by hand or foot.
Sample 1Sample 2Sample 3
Manual transmission means a transmission utilizing a driver-operated clutch that is
Sample 1Sample 2
Manual transmission. All internally lubricated parts within the transmission case, including but not limited to bearings, bushings, gears, shafts, synchronizers, spacers, main drive gear, main shaft, shift forks, synchronizer drums, overdrive housing. Transmission case is covered only if damaged by an internally lubricated part.
Sample 1
Manual transmission. All internally lubricated parts, all gears, all bearings, main drive gear, internal shifting components, synchronizing drum, shafts and spacers, main shaft, bushings. DRIVE AXLE ASSEMBLY (Front & Rear): All internally lubricated parts within the drive axle housing plus the center carrier bearings, constant velocity joints, double offset joints, drive shaft/yokes, locking hub mechanisms, propeller shafts, and universal joints. The drive axle housing is only covered if damaged by an internally lubricated part.
Sample 1
Manual transmission. All internally lubricated parts, all gears, all bearings, main drive gear, internal shifting components, synchronizing drum, shafts and spacers, main shaft, bushings. Transmission case is covered if damage is due to the failure of an internally lubricated part. DRIVE AXLE ASSEMBLY (Front & Rear): All internally lubricated parts within the drive axle housing plus the center carrier bearings, constant velocity joints, double offset joints, drive shaft/yokes, locking hub mechanisms, propeller shafts, and universal joints. The drive axle housing is only covered if damaged by an internally lubricated part.
Sample 1
Manual transmission means a transmission utilizing a driver-operated clutch that is activated by a pedal or
Sample 1
Manual transmission means a transmission where gears are shiftedby hand in conjunction with manual disengagement of a clutch. Comment [RCG19]: Delete.These definitions are not applicable at EC/UNECE level. Don’t replace with definitions of M1, N1 etc., as they are defined in higher level documents (i.e.Consolidated Resolution on the Construction of Vehicles(R.E.3) and Annex 2 of 2007/46/EC as amended by Commission Regulation (EU) No 678/2011 of 14 July 2011) If we delete and renumber those paragraphs below beware of x-ref implications AdminWG 080514 – [not applicable] addedDeleted: "Category 1 vehicle" means a power driven vehicle with four or more wheels designed and constructed primarily for the carriage of one or morepersons.Deleted: "Category 1-1 vehicle" means a category 1 vehicle comprising not more than eight seating positions in addition to the driver’s seating position. A category 1-1 vehicle may havestanding passengers.Deleted: "Category 1-2 vehicle" means a category 1 vehicle designed for the carriage of more than eight passengers, whether seated or standing,in addition to the driver.Deleted: "Category 2 vehicle" means a power driven vehicle with four or more wheels designed and constructed primarily for the carriage of goods. This category shall also include:¶(a) Tractive units;¶(b) Chassis designed specifically to be equipped with special equipment.Deleted:
Sample 1