Materials Declaration Requirements means any requirements, obligations, standards, duties or responsibilities pursuant to any environmental, product composition and/or materials declaration laws, directives, or regulations, including international laws and treaties regarding such subject matter; and any regulations, interpretive guidance or enforcement policies related to any of the foregoing, including, but not limited to, the following examples: Directive 2002/95/EC of the European Parliament and of the Council of 27 January 2003 on the restriction of the use Portions of this Exhibit were omitted and have been filed separately with the Secretary of the Commission pursuant to the Company’s application requesting confidential treatment under Rule 24b-2 of the Exchange Act - [***] denotes omissions. of certain hazardous substances in electrical and electronic equipment (“RoHS”), Directive 2002/96/EC of the European Parliament and of the Council of 27 January 2003 on waste electrical and electronic equipment (“WEEE”), and European Union Member State implementations of the foregoing; the People’s Republic of China (PRC) Measures for the Administration of the Control of Pollution by Electronic Information Products (China RoHS) (电子信息产品污染控制管理办法) promulgated on February 28, 2006 (including any pre-market certification (“CCC xxxx”) requirements thereunder and including relevant standards adopted by the PRC Ministry of Information Industry or other applicable PRC authority); PRC General Administration of Quality Supervision, Inspection and Quarantine’s Circular 441 (2006); Japanese Industrial Standard C0950:2005(J-Xxxx Japan RoSH); the California Electronic Waste Recycling Act of 2003; Act on the Recycling of Electrical and Electronics Equipment and Automobiles (1.1.2008) (Korea RoHS), Waste Act (2004) and secondary legislation (based on EU directives ) (Croatia), Regulation (EC) No 1907/2006, Regulation concerning the Registration, Evaluation, Authorization and Restriction of Chemicals (REACH), establishing a European Chemicals Agency amending Directive 1999/45/EC and repealing Council Regulation (EEC) No 793/93 and Commission Regulation (EC) No 1488/94 as well as Council Directive 76/769/EEC and Commission Directives 91/155/EEC, 93/67/EEC, 93/105/EC and 2000/21/ECand/or other similar legislation. The Materials Declaration Requirements shall include compliance with Brazil RoHS, Mexico RoHS and Argentina RoHS as each of these countries promulgates their own legislation.

Materials Declaration Requirements means any requirements, obligations, standards, duties or responsibilities pursuant to any environmental, product composition, ecodesign (Directive 2009/125/EC), energy use, energy efficiency and/or materials declaration laws, directives, or regulations, including international laws and treaties regarding such subject matter; and any regulations, interpretive guidance or enforcement policies related to any of the foregoing.

Examples of Materials Declaration Requirements in a sentence

Supplier represents and warrants that all Products sold to Buyer meet the Maximum Concentration Values and Materials Declaration Requirements unless Buyer and Supplier agree in writing that (1) RoHS Directive explicitly exempts the Product in question or (2) the RoHS Directive explicitly exempts the exceedance of the Maximum Concentration Values in the particular Product or component thereof.
Company represents and warrants that the Product is not subject to Materials Declaration Requirements.
Where Company notifies Jabil in writing that the Product is subject to Materials Declaration Requirements, Jabil will use Commercially Reasonable Efforts to assist Company in procuring parts, components and/or materials that are compliant with Materials Declaration Requirements.
In addition, Jabil shall fully cooperate and render all necessary assistance to Company in Company’s efforts to recover on any claims against any suppliers related to Materials Declaration Requirements.
Upon Company’s request, Jabil shall use commercially reasonable efforts to collect documentation from suppliers on the AVL as of the Effective Date, certifying compliance with Materials Declaration Requirements with respect to Components, the form of which certification has been provided, or approved, by Company (“Compliance Certification”).

More Definitions of Materials Declaration Requirements

Materials Declaration Requirements means any requirements, obligations, standards, duties or responsibilities pursuant to any environmental, product composition and/or materials declaration Laws, directives, or regulations, including international Laws and treaties regarding such subject matter; and any regulations, interpretive guidance or enforcement policies related to any of the foregoing, including for example: RoHS Directive 2011/65/EU of the European Parliament and of the Council of 8 June 2011 on the restriction of the use of certain hazardous substances in electrical and electronic equipment, O.J.L174, 1.7.2011, as amended from time to time, any similar Laws in Switzerland and the European Economic Area or other similar or related environmental, product composition or materials declaration Laws and interpretive guidance and enforcement policies relating to any of the foregoing. WEEE Directive 2012/19/EU of the European Parliament and of the Council of 4 July 2012 on waste electrical and electronic equipment, Directive 2012/19/EU (OJ:L197/38/2012), as amended from time to time, REACH Directive 2009/15/EC of the European Parliament and of the Council of 21 October 2009 establishing a framework for the setting or eco- design requirements for energy-related products (and applicable implementing measures thereunder) and European Union Member State implementations of the foregoing, or similar laws in Switzerland or the European Economic Area; Regulation (EC) No.1907/2006 of the European Parliament and of the Council of 18 December 2006 concerning the Registration, Evaluation, Authorization and Restriction of Chemicals, as amended from time to time and the People's Republic of China (PRC) Measures for the Administration of the Control of Pollution by Electronic Information Products promulgated on February 28, 2006 (including any pre-market certification ("CCC mark") requirements thereunder and any relevant standards adopted by the PRC Ministry of Information Industry or other applicable PRC authority); Substances of Concern in Products (SCIP) regulations as defined in the (EU) Waste Framework Directive (2008/98/EC); Toxic Substances Control Act (TSCA) PFAS/3:1-PIP regulations, and/or other similar legislation; (iv) “Law” means any U.S., or non-U.S. federal, national, supranational, state, provincial, local or similar statute, Law (including common Law), regulation, treaty, constitutional provision, ordinance, code, directive, including the (RoHS Directive and WEEE Directive) notice, bindi...

Materials Declaration Requirements means Directive 2002/95/EC of the European Parliament and of the Council of 27 January 2003 on the restriction of the use of certain hazardous substances in electrical and electronic equipment as amended from time to time (“RoHS Directive”), Directive 2002/96/EC of the European Parliament and of the Council of 27 January 2003 on waste electrical and electronic equipment, as amended from time to time (“WEEE Directive”), any European Union Member State implementations thereof, and/or other similar environmental and/or materials declaration laws, directives, regulations and requirements, including international laws and treaties regarding such subject matter, as amended from time to time.

Materials Declaration Requirements means any material disclosure requirements under any environmental, product composition, and/or materials declaration or similar Laws.

Materials Declaration Requirements means any requirements, obligations, standards, duties or responsibilities pursuant to any environmental, product composition and/or materials declaration laws, directives, or regulations, including international laws and treaties regarding such subject matter; and any regulations, interpretive guidance or enforcement policies related to any of the foregoing, including, but not limited to, the following examples: Directive 2002/95/EC of the European Parliament and of the Council of 27 January 2003 on the restriction of the use of certain hazardous substances in electrical and electronic equipment (“RoHS”), Directive 2002/96/EC of the European Parliament and of the Council of 27 January 2003 on waste electrical and electronic equipment (“WEEE”), and European Union Member State implementations of the foregoing; the People’s Republic of China (PRC) Measures for the Administration of the Control of Pollution by Electronic Information Products promulgated on February 28, 2006 (including any pre-market certification (“CCC mark”) requirements thereunder and including relevant standards adopted by the PRC Ministry of Information Industry or other applicable PRC authority); PRC General Administration of Quality Supervision, Inspection and Quarantine’s Circular 441 (2006); Japanese Industrial Standard C0950:2005; the California Electronic Waste Recycling Act of 2003; Act on the Recycling of Electrical and Electronics Equipment and Automobiles (1.1.2008) (Korea), Waste Act (2004) and secondary legislation (based on EU directives ) (Croatia), Regulation (EC) No 1907/2006, Regulation concerning the Registration, Evaluation, Authorisation and Restriction of Chemicals (REACH), establishing a European Chemicals Agency amending Directive 1999/45/EC and repealing Council Regulation (EEC) No 793/93 and Commission Regulation (EC) No 1488/94 as well as Council Directive 76/769/EEC and Commission Directives 91/155/EEC, 93/67/EEC, 93/105/EC and 2000/21/EC and/or other similar legislation.

Materials Declaration Requirements means any requirements concerning the disclosure of hazardous substances contained or used in any product, component, material or part, such as those in Directive 2002/95/EC of the European Parliament and of the Council of 27 January 2003 on the restriction of the use of certain hazardous substances in electrical and electronic equipment, as amended from time to time (“RoHS Directive”), Directive 2002/96/EC of the European Parliament and of the Council of 27 January 2003 on waste electrical and electronic equipment, as amended from time to time (“WEEE Directive”), any European Union Member State implementations of them, the equivalent of the RoHS Directive as implemented in China and Japan, and/or other similar environmental and/or materials declaration laws, directives, regulations and requirements, including international laws and treaties regarding such subject matter, as amended from time to time, as well as those set forth in JIG-101 of the Consumer Electronics Association. Seller shall provide and shall obtain from its suppliers, when necessary, documentation certifying compliance with Materials Declaration Requirements with respect to the products, the form of which has been provided, or approved in writing, by JEOL (“Compliance Certification”) and which Compliance Certification shall be provided to JEOL prior to the initial purchase order for such product and thereafter, at JEOL’s request.

Materials Declaration Requirements definition

Filter & Search

Related Definitions