Measuring rim definition

Measuring rim means the rim specified as a 'measuring rim width' or 'design rim width' for a particular tyre size designation in any edition of one or more of the International Tyre Standards.
Sample 1Sample 2Sample 3
Measuring rim means the rim on which a tyre is required to be fitted for size measurements;
Sample 1Sample 2Sample 3
Measuring rim means the rim on which a tyre is fitted for the measurement of the dimensions;
Sample 1Sample 2Sample 3

Examples of Measuring rim in a sentence

  • Annex 9 - Measuring rim width; 02 series of amendments to Regulation No. 117 (Tyre rolling resistance, rolling noise and wet grip) ECE/TRANS/WP.29/2010/63, as amended by para.

  • Radial and diagonal constructionsTyre-size designation (+) Measuring rim width code Nominal rim diameter d (mm) Outer diameter D (mm) Section width S (mm) Radial Diagonal Radial Diagonal Std.

  • Tyres in Diagonal Construction (European tyres) Size Measuring rim width code Overall diameter 1/ mm Tyre section width 1/ mm Nominal rim diameter "d" mm Super Ballon Series Super Low Section Series 2/ _______________ 1/ Tolerance: see paragraphs 6.1.4. and 6.1.5. 2/ The following size designations are accepted: 185-14/7.35-14 or 185-14 or 7.35-14 or 7.35-14/185-14.

  • Measuring rim means the rim on which a tire is fitted for physical dimension requirements.

  • Millimetric Series - Radial (European tyres) Size Measuring rim width code Overall diameter 1/ mm Tyre section width 1/ mm Nominal rim diameter "d" mm ____________________ 1/ Tolerance: see paragraphs 6.1.4. and 6.1.5. Table III.


More Definitions of Measuring rim

Measuring rim means the rim on which a tyre must be fitted for dimensional measurement purposes;
Sample 1Sample 2Sample 3
Measuring rim means an actual rim, on which the tyre is fitted for measuring the physical dimensions;
Sample 1Sample 2Sample 3
Measuring rim means the rim on which a tyre must be fitted for dimensional measurements;
Sample 1Sample 2Sample 3
Measuring rim means the rim on which a tyre must be fitted for size measurements;
Sample 1Sample 2Sample 3
Measuring rim means an actual rim of specified width as defined by one of the standards organizations as specified in Annex 10, on which the tyre is fitted for measuring the physical dimensions;
Sample 1
Measuring rim. Measuring rim" means the rim specified as a 'measuring rim width' or 'design rim width' for a particular tyre size designation in any edition of one or more of the International Tyre Standards.
Sample 1
Measuring rim means a rim for a particular tire size designation of the dimensions specified either in the 1967 Tire and Rim Association Year Book, pages PC-10-F or PC-10-H of its En­ gineering Supplement dated October 28, 1966, or the 1967 Tire and Rim Associa­ tion Data Book, for the applicable width specified in Table I.
Sample 1