Rated Pressure definition

Rated Pressure means that pressure that is equal to or less than the designed pressure and appears on the data plate of the equipment.
Sample 1Sample 2Sample 3
Rated Pressure means that pressure that:
Sample 1Sample 2Sample 3
Rated Pressure means that pressure that is equal to or less than the designed pressure and appears on the data plate of the equipment. "RECEPTOR" means an approved plumbing fixture or device of such material, shape, and capacity as to adequately receive the discharge from indirect waste piping, so constructed and located as to be readily cleaned.
Sample 1

Examples of Rated Pressure in a sentence

  • This system should not be used on water that is microbiologically unsafe or with water of unknown quality unless the water has been adequately disinfected before or after traveling through the filtration system.• Rated Capacity - 400 gallons• Rated service flow - .5 GPM• Maximum Rated Pressure - 100 PSI• Maximum Operating Temp.

  • The breaking pin shall be identified to a lot number and shall be guaranteed by the Man- ufacturer to break when the rated pressure, within the following tolerances, is applied to the device: Rated Pressure, psi (kPa) Tolerance, Plus or54 This use of a rupture disk device in series with the pressure relief valve is Min.

  • This information is of utmost importance d0uring the execution stage of the project.SNItemLabelling1Solar Water Heater Assembly Name of manufacturer Designation of System Type Serial Number Year of Production Absorber and Aperture area in m2 Nominal Storage in litres Rated Pressure of the drinking water pipe in kPa Heat Transfer Medium Rated Pressure of Heat Transfer Medium2Solar Module Assembly incl.

  • Rated Pressure test (repeat) : Equipment subjected (6.2.5 performance test).

  • Page 8As shown above, the Specified Pressure Loss component is used in the same way as the Rated Pressure Loss component discussed before.

  • ASME Rated Pressure Vessels: All pressure vessels provided under Division 15 Sections for supplemental and additional requirements.

  • If the investments are short-term and highly liquid, the amounts are reflected as cash and cash equivalents.

  • The flanges shall be  80NB Size flanges (Total Number 94, Rated Pressure 1000kPa, Type 5) 94 x 1000/5.

  • Item 2202 and Item 3201: Hoses used for Underbalanced and Gas Drilling/ Proposed Increase to Rated Pressure of Mud and Cement Hoses within API 7K.

  • The EFCV shall be designed for Full Rated Pressure at its rating.

Related to Rated Pressure

  • Backpressure means a pressure (caused by a pump, elevated tank or piping, boiler, or other means) on the consumer's side of the service connection that is greater than the pressure provided by the public water system and which may cause backflow.

  • Pressure means the total load or force per unit area acting on a surface.

  • Rated Voltage means the manufacturer’s design voltage at which the transmission system is designed to operate or such lower voltage at which the line is charged, for the time being, in consultation with Transmission System Users;

  • Operating pressure means the pressure at which the parts of an irrigation system are designed by the manufacturer to operate.

  • Altitude means the vertical distance of a level, a point or an object considered as a point, measured from mean sea level (MSL);

  • Reid vapor pressure means the vapor pressure of crude oil or other volatile petroleum products at 100 degrees Fahrenheit as determined by the latest edition of ASTM D6377 (RVPE): Standard Test Method for Determination of Vapor Pressure of Crude Oil.

  • Runoff coefficient means the fraction of total rainfall that will appear at the conveyance as runoff.

  • Working pressure means the settled pressure of a compressed gas at a reference temperature of 15 °C in a full pressure receptacle;

  • Small quantity generator means a generator who generates less than 1000 kg of hazardous waste in a calendar month.

  • Finished water means the water that is introduced into the distribution system of a public water system and is intended for distribution and consumption without further treatment, except as treatment necessary to maintain water quality in the distribution system (e.g., booster disinfection, addition of corrosion control chemicals).

  • Saturated zone or "zone of saturation" means that part of the earth's crust in which all voids are filled with water.

  • Coefficient means a number that represents the quantified relationship of each variable to the assessed value of a property when derived through a mass appraisal process

  • Design pressure means the hydrostatic pressure for which each structure or appliance assumed watertight in the intact and damage stability calculations is designed to withstand.

  • Attachment point means a point on the network at which network assets are connected to assets owned by another person.

  • True vapor pressure means the equilibrium partial pressure exerted by a petroleum liquid as determined in accordance with methods described in American Petroleum Institute (API) Bulletin 2517, Evaporation Loss from External Floating Roof Tanks, 1980. The API procedure may not be applicable to some high viscosity or high pour crudes. Available estimates of true vapor pressure may be used in special cases such as these.

  • Flue means a passage for conveying the products of combustion from a gas appliance to the external air.

  • Used water means any water supplied by a public water supply system to a consumer's water system after it has passed through the service connection and is no longer under the control of the water supply official custodian.

  • Recycled water or “reclaimed water” means treated or recycled waste water of a quality suitable for non-potable uses such as landscape irrigation and water features. This water is not intended for human consumption.

  • Tank means an enclosed space which is formed by the permanent structure of a ship and which is designed for the carriage of liquid in bulk.

  • Electrical Distance means, for a Generation Capacity Resource geographically located outside the metered boundaries of the PJM Region, the measure of distance, based on impedance and in accordance with the PJM Manuals, from the Generation Capacity Resource to the PJM Region.