Permissible Purpose Sample Clauses

Permissible Purpose. NCC and Client certify that any Consumer Reports or related Credit Bureau Data will only be used for a permissible purpose and used for no other purpose other than prescribed by the Fair Credit Reporting Act (“FCRA”).
Sample 1Sample 2Sample 3See All (5)
AutoNDA by SimpleDocs
Permissible Purpose. Client shall procure and use Screening Reports only for the legally permissible employment purposes set forth in this Agreement.
Sample 1Sample 2Sample 3
Permissible Purpose. Pursuant to the FCRA (15 U.S.C. § 1681b(a)(3)(B)), End User hereby certifies that all of its orders for Screening Reports from Sterling shall be made, and the resulting reports shall be used for employment purposes, as defined in the FCRA, including evaluating a consumer for employment, promotion, reassignment or retention as an employee, where the consumer has given prior written permission.
Sample 1Sample 2
Permissible Purpose. The specific purpose(s) that the consumer information will be used for is/are: Employment purposes including evaluating a consumer for employment, promotion, reassignment or retention of an employment Eligibility for a license In connection with a business transaction initiated by the subject of the report
Sample 1Sample 2
Permissible Purpose. That each time a request for information or a credit report is made of the Credit Bureau, the SUBSCRIBER’S representative authorized to make such a request will use the information or report solely for a permissible purpose, namely:
Sample 1Sample 2
Permissible Purpose. End-User certifies that all of its orders for Reports from Xxx-xxxxxx.xxx, Inc. shall be made, and the resulting Reports shall be used, only in accordance with the Laws, and with regard to the FCRA, for the following FCRA- permissible purposes only: (CHECK ALL THAT APPLY). Section 604(a)(2). As instructed by the consumer in writing. ✔ Section 604(a)(3)(B). For employment purposes, including evaluating a consumer for employment, promotion, reassignment or retention as an employee, where the consumer has given prior written permission (“employment purposes”). • Xxx-xxxxxx.xxx will process every request for Services as for an “investigative consumer report,” as defined by the FCRA, and for employment purposes, and End-User certifies with and for each order for a Report that is has complied with the Laws before placing the order for Services, including its obligation, if any, to provide to each consumer the required disclosures and obtain his or her authorization. • End-User shall not request, obtain or use Reports for any purpose not checked above, including, but not limited to, for the purpose of selling, leasing, renting or otherwise providing information obtained under this Agreement, or derived from such information, to any other party, whether alone or in conjunction with End-User’s owndata. • End-User understands and agrees that it will be required to identify and certify the specific permissible purpose for each individual Report requested from Xxx-xxxxxx.xxx, Inc. at the time of each order, and that it will be used solely for End-User’s exclusive one-time use. • The Reports shall be requested by, and disclosed by End-User only to, End-User’s designated and authorized employees having a need to know and only to the extent necessary to enable End-User to use the Reports in accordance with this Agreement. End-User shall ensure that such designated and authorized employees shall not attempt to obtain any Reports on themselves, associates, or any other person except in the exercise of their authorized and official duties. • PLEASE NOTE: THE FCRA PROVIDES THAT ANY PERSON WHO KNOWINGLY AND WILLFULLY OBTAINS INFORMATION ON A CONSUMER FROM A CONSUMER REPORTING AGENCY UNDER FALSE PRETENSES SHALL BE FINED UNDER TITLE 18 OF THE UNITED STATES CODE OR IMPRISONED NOT MORE THAN TWO YEARS, OR BOTH.
Sample 1
Permissible Purpose. End User hereby certifies that all of its orders for Screening Reports from Reveal Background shall be made, and the resulting reports shall be used for employment purposes, as defined in the FCRA, including evaluating a consumer for employment, promotion, reassignment or retention as an employee, where the consumer has given prior permission.
Sample 1
AutoNDA by SimpleDocs
Permissible Purpose. Client certifies that it will use the Reports and information therein only for the following specific Permissible Purpose: Employment.
Sample 1
Permissible Purpose. End User hereby certifies that it has a permissible purpose under the FCRA to obtain the Consumer Report and that the report will only be used for employment purposes including evaluating a Consumer for employment, promotion, reassignment or retention as an employee, where the Consumer has given prior written permission and for no other purpose.
Sample 1

Related to Permissible Purpose

  • DEBARMENT, SUSPENSION, INELIGIBILITY AND VOLUNTARY EXCLUSION By executing this contract the firm affirms that it is in compliance with the requirements of 2 C.F.R. Part 180 and that neither it, its principals, nor its subcontractors are presently debarred, suspended, proposed for debarment, declared ineligible, or voluntarily excluded from participation in this transaction by any Federal department or agency.

  • Certification Regarding Debarment, Suspension, Ineligibility and Voluntary Exclusion First Tier Participants:

  • Limitation of Vendor Indemnification and Similar Clauses This is a requirement of the TIPS Contract and is non-negotiable TIPS, a department of Region 8 Education Service Center, a political subdivision, and local government entity of the State of Texas, is prohibited from indemnifying third-parties (pursuant to the Article 3, Section 52 of the Texas Constitution) except as otherwise specifically provided for by law or as ordered by a court of competent jurisdiction. Article 3, Section 52 of the Texas Constitution states that "no debt shall be created by or on behalf of the State … " and the Texas Attorney General has opined that a contractually imposed obligation of indemnity creates a "debt" in the constitutional sense. Tex. Att'y Gen. Op. No. MW-475 (1982). Thus, contract clauses which require TIPS to indemnify Vendor, pay liquidated damages, pay attorney's fees, waive Vendor's liability, or waive any applicable statute of limitations must be deleted or qualified with ''to the extent permitted by the Constitution and Laws of the State of Texas." Does Vendor agree? Yes, I Agree Alternative Dispute Resolution Limitations This is a requirement of the TIPS Contract and is non-negotiable. TIPS, a department of Region 8 Education Service Center, a political subdivision, and local government entity of the State of Texas, does not agree to binding arbitration as a remedy to dispute and no such provision shall be permitted in this Agreement with TIPS. Vendor agrees that any claim arising out of or related to this Agreement, except those specifically and expressly waived or negotiated within this Agreement, may be subject to non-binding mediation at the request of either party to be conducted by a mutually agreed upon mediator as prerequisite to the filing of any lawsuit arising out of or related to this Agreement. Mediation shall be held in either Camp or Titus County, Texas. Agreements reached in mediation will be subject to the approval by the Region 8 ESC's Board of Directors, authorized signature of the Parties if approved by the Board of Directors, and, once approved by the Board of Directors and properly signed, shall thereafter be enforceable as provided by the laws of the State of Texas. Does Vendor agree? Yes, Vendor agrees Does Vendor agree? Yes, Vendor agrees No Waiver of TIPS Immunity This is a requirement of the TIPS Contract and is non-negotiable. Vendor agrees that nothing in this Agreement shall be construed as a waiver of sovereign or government immunity; nor constitute or be construed as a waiver of any of the privileges, rights, defenses, remedies, or immunities available to Region 8 Education Service Center or its TIPS Department. The failure to enforce, or any delay in the enforcement, of any privileges, rights, defenses, remedies, or immunities available to Region 8 Education Service Center or its TIPS Department under this Agreement or under applicable law shall not constitute a waiver of such privileges, rights, defenses, remedies, or immunities or be considered as a basis for estoppel. 5 Does Vendor agree? Yes, Vendor agrees Payment Terms and Funding Out Clause This is a requirement of the TIPS Contract and is non-negotiable. Vendor agrees that TIPS and TIPS Members shall not be liable for interest or late-payment fees on past-due balances at a rate higher than permitted by the laws or regulations of the jurisdiction of the TIPS Member. Funding-Out Clause: Vendor agrees to abide by the applicable laws and regulations, including but not limited to Texas Local Government Code § 271.903, or any other statutory or regulatory limitation of the jurisdiction of any TIPS Member, which requires that contracts approved by TIPS or a TIPS Member are subject to the budgeting and appropriation of currently available funds by the entity or its governing body. 2

  • CERTIFICATION PROHIBITING DISCRIMINATION AGAINST FIREARM AND AMMUNITION INDUSTRIES (Texas law as of September 1, 2021) By submitting a proposal to this Solicitation, you certify that you agree, when it is applicable, to the following required by Texas law as of September 1, 2021: If (a) company is not a sole proprietorship; (b) company has at least ten (10) full-time employees; (c) this contract has a value of at least $100,000 that is paid wholly or partly from public funds; (d) the contract is not excepted under Tex. Gov’t Code § 2274.003 of SB 19 (87th leg.); and (e) governmental entity has determined that company is not a sole-source provider or governmental entity has not received any bids from a company that is able to provide this written verification, the following certification shall apply; otherwise, this certification is not required. Pursuant to Tex. Gov’t Code Ch. 2274 of SB 19 (87th session), the company hereby certifies and verifies that the company, or association, corporation, partnership, joint venture, limited partnership, limited liability partnership, or limited liability company, including a wholly owned subsidiary, majority-owned subsidiary parent company, or affiliate of these entities or associations, that exists to make a profit, does not have a practice, policy, guidance, or directive that discriminates against a firearm entity or firearm trade association and will not discriminate during the term of this contract against a firearm entity or firearm trade association. For purposes of this contract, “discriminate against a firearm entity or firearm trade association” shall mean, with respect to the entity or association, to: “(1) refuse to engage in the trade of any goods or services with the entity or association based solely on its status as a firearm entity or firearm trade association; (2) refrain from continuing an existing business relationship with the entity or association based solely on its status as a firearm entity or firearm trade association; or (3) terminate an existing business relationship with the entity or association based solely on its status as a firearm entity or firearm trade association. See Tex. Gov’t Code § 2274.001(3) of SB 19. “Discrimination against a firearm entity or firearm trade association” does not include: “(1) the established policies of a merchant, retail seller, or platform that restrict or prohibit the listing or selling of ammunition, firearms, or firearm accessories; and (2) a company’s refusal to engage in the trade of any goods or services, decision to refrain from continuing an existing business relationship, or decision to terminate an existing business relationship to comply with federal, state, or local law, policy, or regulations or a directive by a regulatory agency, or for any traditional business reason that is specific to the customer or potential customer and not based solely on an entity’s or association’s status as a firearm entity or firearm trade association.” See Tex. Gov’t Code § 2274.001(3) of SB 19.

  • CERTIFICATION PROHIBITING DISCRIMINATION AGAINST FIREARM AND AMMUNITION INDUSTRIES (Texas law as of September 1, 2021) By submitting a proposal to this Solicitation, you certify that you agree, when it is applicable, to the following required by Texas law as of September 1, 2021: If (a) company is not a sole proprietorship; (b) company has at least ten (10) full-time employees; (c) this contract has a value of at least $100,000 that is paid wholly or partly from public funds; (d) the contract is not excepted under Tex. Gov’t Code § 2274.003 of SB 19 (87th leg.); and (e) governmental entity has determined that company is not a sole-source provider or governmental entity has not received any bids from a company that is able to provide this written verification, the following certification shall apply; otherwise, this certification is not required. Pursuant to Tex. Gov’t Code Ch. 2274 of SB 19 (87th session), the company hereby certifies and verifies that the company, or association, corporation, partnership, joint venture, limited partnership, limited liability partnership, or limited liability company, including a wholly owned subsidiary, majority-owned subsidiary parent company, or affiliate of these entities or associations, that exists to make a profit, does not have a practice, policy, guidance, or directive that discriminates against a firearm entity or firearm trade association and will not discriminate during the term of this contract against a firearm entity or firearm trade association. For purposes of this contract, “discriminate against a firearm entity or firearm trade association” shall mean, with respect to the entity or association, to: “(1) refuse to engage in the trade of any goods or services with the entity or association based solely on its status as a firearm entity or firearm trade association; (2) refrain from continuing an existing business relationship with the entity or association based solely on its status as a firearm entity or firearm trade association; or (3) terminate an existing business relationship with the entity or association based solely on its status as a firearm entity or firearm trade association. See Tex. Gov’t Code § 2274.001(3) of SB 19. “Discrimination against a firearm entity or firearm trade association” does not include: “(1) the established policies of a merchant, retail seller, or platform that restrict or prohibit the listing or selling of ammunition, firearms, or firearm accessories; and (2) a company’s refusal to engage in the trade of any goods or services, decision to refrain from continuing an existing business relationship, or decision to terminate an existing business relationship to comply with federal, state, or local law, policy, or regulations or a directive by a regulatory agency, or for any traditional business reason that is specific to the customer or potential customer and not based solely on an entity’s or association’s status as a firearm entity or firearm trade association.” See Tex. Gov’t Code § 2274.001(3) of SB 19.

Time is Money Join Law Insider Premium to draft better contracts faster.