Acceptance Testing Billing Sample Clauses

Acceptance Testing Billing. 9.4.1 CLEC will be billed for Acceptance Testing of this Appendix for xDSL Loops that are installed correctly by the committed interval without the benefit of corrective action due to Acceptance Testing. 9.4.2 CLEC shall pay Maintenance of Service charges on a time and material basis, in 30-minute increments, for the AT&T ILLINOIS technician time involved, pursuant to the applicable, regional FCC tariffed rates set forth in Sections 13.3.4 (c)(1)(a) of FCC No. 2; provided, however, the tariffed rates shall be deemed to be automatically revised and updated in the event that the referenced tariffed rates are modified during the term of this Agreement. If requested by CLEC, Overtime or Premium time charges will apply for requests in off-hours at overtime time charges calculated at one and one half times the standard price and premium time being calculated at two times the standard price.
AutoNDA by SimpleDocs
Acceptance Testing Billing. CLEC shall pay maintenance of service charges, on a time and material basis (i.e., Time and Material Charges), for the CenturyLink technician time involved at the rates set forth in the Pricing Appendix. If requested by **CLEC, Overtime or Premium time charges will apply for Acceptance Testing requests in off-hours at overtime charges calculated at one and one half times the standard price and premium time.
Acceptance Testing Billing. 8.4.1 The CLEC will be billed for Acceptance Testing upon the effective date of this Appendix for loops that are installed correctly by the committed interval without the benefit of corrective action due to acceptance testing. 8.4.1.1 (Reserved). 8.4.1.2 (Reserved). 8.4.1.3 (Reserved). 8.4.1.4 (Reserved). 8.4.1.5 (Reserved).
Acceptance Testing Billing. 7.3.1 Socket will be billed for Acceptance Testing upon the effective date of this Article for loops and subloops that are installed correctly by the committed interval without the benefit of corrective action performed by CenturyTel due to acceptance testing. In particular, Socket shall pay maintenance of service charges on a time and material basis, for the CenturyTel technician time involved at the rates set forth in Article VII – Appendix Pricing. If requested by Socket, Overtime or Premium time charges will apply for Acceptance Testing requests in off-hours at overtime charges calculated at one and one half times the standard price and premium time.
Acceptance Testing Billing. 7.3.1 In particular, CLEC shall pay Maintenance of Service charges at the rates in the Pricing Schedule, in 30- minute increments, for the AT&T technician time involved, or at the tariffed rates set forth in FCC Tariff No. 73, Section 13.4.4; provided, however, the tariffed rates shall be deemed to be automatically revised and updated in the event that the referenced tariffed rates are modified during the term of this Agreement. If requested by CLEC, Overtime or Premium time charges will apply for requests in off-hours at overtime time charges at the rates in the Pricing Schedule and/or tariff.

Related to Acceptance Testing Billing

  • Acceptance Testing At the time of installation of a LIS trunk group, and at no additional charge, acceptance tests will be performed to ensure that the service is operational and meets the applicable technical parameters.

  • Acceptance Tests 11.1 If the Contract provides acceptance tests for Goods and/or the result of Services after their completion and/or delivery to the Purchaser, the acceptance shall only be considered as definitive when such tests have demonstrated the compliance of the Goods and/or the result of the Services to the requirements in the Contract. 11.2 Where the Contract provides for an acceptance procedure in the presence of both parties, at the successful completion of such procedure, the Purchaser shall issue the Supplier with an acceptance certificate which shall authorise the Supplier to invoice the Purchaser for any payment due on such acceptance. 11.3 The Purchaser shall at its discretion be entitled to issue and acceptancecertificate with reserves. The Supplier shall be obliged to remedy any non-conformities within the period set out in the acceptance certificate. Any payment which would otherwise have been due on acceptance may be withheld by the Purchaser in whole or part until the non- conformities underlying the reserves have been remedied.

  • Random Testing Notwithstanding any provisions of the Collective Agreement or any special agreements appended thereto, section 4.6 of the Canadian Model will not be applied by agreement. If applied to a worker dispatched by the Union, it will be applied or deemed to be applied unilaterally by the Employer. The Union retains the right to grieve the legality of any imposition of random testing in accordance with the Grievance Procedure set out in this Collective Agreement.

  • Performance Testing (a) All performance tests of the Project, including any Initial Performance Test required in Section 2 of Appendix VIII, will be performed in accordance with the test procedures set forth in Appendix VIII (“Performance Test”), including additional procedures and protocols related to Performance Testing as mutually agreed between Buyer and Seller (“Test Procedures”). Seller shall bear all costs and receive all revenues, if applicable, associated with all Performance Tests. (b) After the Initial Delivery Date and during the Delivery Term, Buyer will have the right to conduct a Performance Test (“Buyer Performance Test”) no more than once a calendar year to demonstrate whether the Project is capable of delivering the Distribution Services at the Contract Capacity. Within 30 calendar days following a Buyer Performance Test, Seller will have the right to retest the Project with a Performance Test (“Seller Retest”). For the avoidance of doubt, the results of any Seller Retest will supersede the results of the preceding Buyer Performance Test. (i) If a Buyer Performance Test or, if a corresponding Seller Retest has occurred, a Seller Retest demonstrates the Project is capable of delivering Distribution Services at or above ninety-nine percent (99%) of the Initial Contract Capacity, the Contract Capacity will remain the Initial Contract Capacity; (ii) If a Buyer Performance Test or, if a corresponding Seller Retest has occurred, a Seller Retest demonstrates the Project is capable of delivering Distribution Services at more than or equal to eighty-five (85%) of the Initial Contract Capacity, but less than ninety-nine percent (99%) of the Initial Contract Capacity (“Testing Band”), the Contract Capacity will be automatically adjusted (upwards or downwards) to the capacity commensurate with the amount of Distribution Services the Project delivered during the Performance Test within the Testing Band. (iii) If a Buyer Performance Test or, if a corresponding Seller Retest has occurred, a Seller Retest demonstrates the Project is not capable of delivering Distribution Services of at least eighty-five percent (85%) of the Initial Contract Capacity, an Event of Default shall occur in accordance with Section 7.1(a)(viii).

  • Loop Testing/Trouble Reporting 2.1.6.1 Telepak Networks will be responsible for testing and isolating troubles on the Loops. Telepak Networks must test and isolate trouble to the BellSouth portion of a designed/non-designed unbundled Loop (e.g., UVL-SL2, UCL-D, UVL-SL1, UCL-ND, etc.) before reporting repair to the UNE Customer Wholesale Interconnection Network Services (CWINS) Center. Upon request from BellSouth at the time of the trouble report, Telepak Networks will be required to provide the results of the Telepak Networks test which indicate a problem on the BellSouth provided Loop. 2.1.6.2 Once Telepak Networks has isolated a trouble to the BellSouth provided Loop, and had issued a trouble report to BellSouth on the Loop, BellSouth will take the actions necessary to repair the Loop if a trouble actually exists. BellSouth will repair these Loops in the same time frames that BellSouth repairs similarly situated Loops to its End Users. 2.1.6.3 If Telepak Networks reports a trouble on a non-designed or designed Loop and no trouble actually exists, BellSouth will charge Telepak Networks for any dispatching and testing (both inside and outside the CO) required by BellSouth in order to confirm the Loop’s working status. 2.1.6.4 In the event BellSouth must dispatch to the end-user’s location more than once due to incorrect or incomplete information provided by Telepak Networks (e.g., incomplete address, incorrect contact name/number, etc.), BellSouth will xxxx Xxxxxxx Networks for each additional dispatch required to repair the circuit due to the incorrect/incomplete information provided. BellSouth will assess the applicable Trouble Determination rates from BellSouth’s FCC or state tariffs.

  • Random Drug Testing All employees covered by this Agreement shall be subject to random drug testing in accordance with Appendix D.

  • ACCEPTANCE STANDARDS Inspection and acceptance/rejection of products shall be made within thirty (30) days of receipt or upon completion of installation should that installation period extend beyond thirty

  • ODUF Testing 6.6.1 Upon request from TWTC, AT&T shall send ODUF test files to TWTC. The Parties agree to review and discuss the ODUF file content and/or format. For testing of usage results, AT&T shall request that TWTC set up a production (live) file. The live test may consist of TWTC’s employees making test calls for the types of services TWTC requests on ODUF. These test calls are logged by TWTC, and the logs are provided to AT&T. These logs will be used to verify the files. Testing will be completed within thirty (30) days from the date on which the initial test file was sent.

  • Contractor Selection In this section, please describe the selection process, including other sources considered and the rationale for selecting the contractor. Please answer all questions: a. What specific skill set does this contractor bring to the project? Please attach a copy of the contractor’s resume if an individual or link to contractor website if a company: i. Xxxxxxxx Xxxx Xxxxx is a retired NHPS teacher with thirty-seven years of experience, with nearly thirty of those teaching years in the Talented and Gifted Program. The Monk Center has worked with New Haven's students and continue to provide programming specific to the New Haven Public Schools. The Monk Center has demonstrated an ability to engage and encourage our students in meaningful and engaging activities. The summer program provides opportunities for students to participate in dance and music activities which allow them to express themselves and learn the historical content of the dance and music. b. How was the Contractor selected? Quotes, RFP/RFQ, Sealed Bid or Sole Source designation from the City of New Haven Purchasing Department? i. RFQ c. Is the contractor the lowest bidder? If no, why? Why was this contractor selected? i. Yes, the contractor provides an activities that usually are offered at high prices than the one proposed. d. Who were the members of the selection committee that scored bid applications? i. Xxxxxx Xxxxxxx, Xxxxx Xxxxxxxxx, Xxxxx Xxxxxx Xxxxxxx, Xxxxxxxxx Xxxxxxx, Xxxxxx Xxxxxxx, Xxxxxxx Xxxxx, Xxxxxxxx Xxxxxxx, Xxxx Xxxxxxx e. If the contractor is Sole Source, please attach a copy of the Sole Source designation letter from the City of New Haven Purchasing Department. i. N/A

  • Laboratory Testing All laboratories selected by UPS Freight for analyzing Controlled Substances Testing will be HHS certified.

Draft better contracts in just 5 minutes Get the weekly Law Insider newsletter packed with expert videos, webinars, ebooks, and more!