Additional Xxxx Provisions Sample Clauses

Additional Xxxx Provisions. Without limitation of the foregoing, each party hereto may use the other party’s name and marks (to the extent such use is permitted hereunder) only in the form and manner and with appropriate legends as prescribed from time to time by the proprietor of such name or xxxx, and except as otherwise set forth in this Agreement, will not use any other trademark or service xxxx in combination with such other party’s name or xxxx without the prior written approval of the owner of such name or trademark. Each party will promptly notify the other party of any unauthorized use by others of such other party’s name or xxxx, which may come to such other party’s attention. Each party has the sole right and discretion to bring infringement or unfair competition proceedings involving its own name or xxxx.
Sample 1
AutoNDA by SimpleDocs

Related to Additional Xxxx Provisions

  • Additional Allocation Provisions Notwithstanding the foregoing provisions of this Article 6:

  • CFR Part 200 or Federal Provision - Xxxx Anti-Lobbying Amendment - Continued If you answered "No, Vendor does not certify - Lobbying to Report" to the above attribute question, you must download, read, execute, and upload the attachment entitled "Disclosure of Lobbying Activities - Standard Form - LLL", as instructed, to report the lobbying activities you performed or paid others to perform. Compliance with all applicable standards, orders, or requirements issued under section 306 of the Clean Air Act (42 U.S.C. 1857(h)), section 508 of the Clean Water Act (33 U.S.C. 1368), Executive Order 11738, and Environmental Protection Agency regulations (40 CFR part 15). (Contracts, subcontracts, and subgrants of amounts in excess of $100,000) Pursuant to the above, when federal funds are expended by ESC Region 8 and TIPS Members, ESC Region 8 and TIPS Members requires the proposer certify that in performance of the contracts, subcontracts, and subgrants of amounts in excess of $250,000, the vendor will be in compliance with all applicable standards, orders, or requirements issued under section 306 of the Clean Air Act (42 U.S.C. 1857(h)), section 508 of the Clean Water Act (33 U.S.C. 1368), Executive Order 11738, and Environmental Protection Agency regulations (40 CFR part 15). Does vendor certify compliance? Yes

  • Remaining Provisions Except as expressly modified by this Amendment, the Employment Agreement shall remain in full force and effect. This Amendment embodies the entire agreement and understanding of the parties hereto with respect to the subject matter hereof, and supersedes all prior and contemporaneous agreements and understandings, oral or written, relative thereto.

  • Additional Termination Provisions Notwithstanding and in addition to the foregoing, in the event that (i) a Mortgage Loan becomes delinquent for a period of 90 days or more (a "Delinquent Mortgage Loan") or (ii) a Mortgage Loan becomes an REO Property, the Purchaser may at its election terminate this Agreement with respect to such Delinquent Mortgage Loan or REO Property, upon 15 days' written notice to the Seller.

  • Definitional Provisions For purposes of this Agreement, (i) those words, names, or terms which are specifically defined herein shall have the meaning specifically ascribed to them; (ii) wherever from the context it appears appropriate, each term stated either in the singular or plural shall include the singular and plural; (iii) wherever from the context it appears appropriate, the masculine, feminine, or neuter gender, shall each include the others; (iv) the words “hereof”, “herein”, “hereunder”, and words of similar import, when used in this Agreement, shall refer to this Agreement as a whole, and not to any particular provision of this Agreement; (v) all references to “Dollars” or “$” shall be construed as being United States Dollars; (vi) the term “including” is not limiting and means “including without limitation”; and, (vii) all references to all statutes, statutory provisions, regulations, or similar administrative provisions shall be construed as a reference to such statute, statutory provision, regulation, or similar administrative provision as in force at the date of this Agreement and as may be subsequently amended.

  • Other Definitional Provisions (a) Capitalized terms used herein and not otherwise defined herein have meanings assigned to them in the Indenture, or, if not defined therein, in the Trust Agreement. (b) All terms defined in this Agreement shall have the defined meanings when used in any instrument governed hereby and in any certificate or other document made or delivered pursuant hereto unless otherwise defined therein. (c) As used in this Agreement, in any instrument governed hereby and in any certificate or other document made or delivered pursuant hereto or thereto, accounting terms not defined in this Agreement or in any such instrument, certificate or other document, and accounting terms partly defined in this Agreement or in any such instrument, certificate or other document to the extent not defined, shall have the respective meanings given to them under generally accepted accounting principles as in effect on the date of this Agreement or any such instrument, certificate or other document, as applicable. To the extent that the definitions of accounting terms in this Agreement or in any such instrument, certificate or other document are inconsistent with the meanings of such terms under generally accepted accounting principles, the definitions contained in this Agreement or in any such instrument, certificate or other document shall control. (d) The words “hereof,” “herein,” “hereunder” and words of similar import when used in this Agreement shall refer to this Agreement as a whole and not to any particular provision of this Agreement; Section, Schedule and Exhibit references contained in this Agreement are references to Sections, Schedules and Exhibits in or to this Agreement unless otherwise specified; and the term “including” shall mean “including without limitation.” (e) The definitions contained in this Agreement are applicable to the singular as well as the plural forms of such terms and to the masculine as well as to the feminine and neuter genders of such terms. (f) Any agreement, instrument or statute defined or referred to herein or in any instrument or certificate delivered in connection herewith means such agreement, instrument or statute as from time to time amended, modified or supplemented and includes (in the case of agreements or instruments) references to all attachments thereto and instruments incorporated therein; references to a Person are also to its permitted successors and assigns.

  • Transitional Provisions 24.1. As from the official date of entry into force of the 01 series of amendments to this Regulation, no Contracting Party applying this Regulation shall refuse to grant or refuse to accept type approval under this Regulation as amended by the 01 series of amendments. 24.2. As from 12 months after the date of entry into force of the 01 series of amendments to this Regulation, Contracting Parties applying this Regulation shall grant approvals only if the type of components to be approved meets the requirements of Part I of this Regulation as amended by the 01 series of amendments to this Regulation. 24.3. Type approvals of components other than fuel rail, as defined in paragraph 4.72., granted according to the original version of this Regulation or of components granted according to the 01 series of amendments, shall remain valid and shall be accepted for the purpose of their installation on vehicles as long as the requirements for the specific component have not changed by any series of amendments. 24.4. As from 18 months after the date of entry into force of the 01 series of amendments to this Regulation, Contracting Parties applying this Regulation shall grant approvals only if the vehicle type to be approved meets the requirements of Part II of this Regulation as amended by the 01 series of amendments to this Regulation. 24.5. Until 12 months after the date of entry into force of the 01 series of amendments to this Regulation, Contracting Parties applying this Regulation can continue to grant type approvals for the type of components to the original version of this Regulation without taking into account the provisions of the 01 series of amendments. 24.6. Until 18 months after the date of entry into force of the 01 series of amendments to this Regulation, Contracting Parties applying this Regulation can continue to grant type approvals for the vehicle type to the original version of this Regulation without taking into account the provisions of the 01 series of amendments. 24.7. Notwithstanding the provisions of paragraphs 24.5. and 24.6., Contracting Parties applying this Regulation shall not refuse to grant extensions of type approvals for existing types of component or vehicle types which have been issued according to this Regulation without taking into account the provisions of the 01 series of amendments to this Regulation. 24.8. As from the official date of entry into force of the 02 series of amendments to this Regulation, no Contracting Party applying this Regulation shall refuse to grant or refuse to accept type approval under this Regulation as amended by the 02 series of amendments. 24.9. As from 1 September 2017 Contracting Parties applying this Regulation shall grant approvals only if the type of components to be approved meets the requirements of Part I of this Regulation as amended by the 02 series of amendments to this Regulation. 24.10. As from 1 September 2018 Contracting Parties applying this Regulation shall grant approvals only if the vehicle type to be approved meets the requirements of Part II of this Regulation as amended by the 02 series of amendments to this Regulation. 24.11. As from 1 September 2019 Contracting Parties applying this Regulation may refuse to recognize approvals of a type of vehicle which have not been granted in accordance with Part II of this Regulation as amended by the 02 series of amendments to this Regulation. 24.12. Contracting Parties applying this Regulation shall not refuse to grant extensions of type approvals for existing types of component or vehicle types which have been issued according to this Regulation without taking into account the provisions of the 02 series of amendments to this Regulation. 24.13. Notwithstanding paragraphs 24.11. and 24.12., Contracting Parties applying this Regulation shall continue to accept type approvals granted to the preceding series of amendments, which are not affected by the 02 series of amendments.

  • REFERENCED CONTRACT PROVISIONS Term provision and Amount Not To Exceed provision, of the Contract are deleted in their entirety and replaced with the following: “Term: July 1, 2019 through September 30, 2024 Period One means the period from July 1, 2019 through June 30, 2020 Period Two means the period from July 1, 2020 through June 30, 2021 Period Three means the period from July 1, 2021 through June 30, 2022 Period Four means the period from July 1, 2022 through June 30, 2023 Period Five means the period from July 1, 2023 through June 30, 2024 Period One Amount Not To Exceed: $360,964 Period Two Amount Not To Exceed: $373,598 Period Three Amount Not To Exceed: $386,674 Period Four Amount Not To Exceed: $450,000 Period Five Amount Not To Exceed: $450,000 Period Six Amount Not To Exceed: $110,469 TOTAL AMOUNT NOT TO EXCEED: $2,131,704” Period Six means the period from July 1, 2024 through September 30, 2024 Amount Not To Exceed:

  • Specific Provisions for Access Rights to Software For the avoidance of doubt, the general provisions for Access Rights provided for in this Section 9 are applicable also to Software. Parties’ Access Rights to Software do not include any right to receive source code or object code ported to a certain hardware platform or any right to receive respective Software documentation in any particular form or detail, but only as available from the Party granting the Access Rights.

  • Lock-Up Provisions (a) The Subject Party hereby agrees not to, during the period commencing from the Closing and ending on the earliest of (x) six (6) months after the date of the Closing and (y) the date after the Closing on which the Purchaser consummates a liquidation, merger, capital stock exchange, reorganization, or other similar transaction with an unaffiliated third party that results in all of the Purchaser’s stockholders having the right to exchange their shares of the Purchaser Common Stock for cash, securities, or other property (the “Lock-Up Period”): (i) lend, offer, pledge, hypothecate, encumber, donate, assign, sell, contract to sell, sell any option or contract to purchase, purchase any option or contract to sell, grant any option, right or warrant to purchase, or otherwise transfer or dispose of, directly or indirectly, any Restricted Securities, (ii) enter into any swap or other arrangement that transfers to another, in whole or in part, any of the economic consequences of ownership of the Restricted Securities, or (iii) publicly disclose the intention to do any of the foregoing, whether any such transaction described in clauses (i), (ii), or (iii) above is to be settled by delivery of Restricted Securities or other securities, in cash or otherwise (any of the foregoing described in clauses (i), (ii), or (iii), a “Prohibited Transfer”). (b) The foregoing shall not apply to the transfer of any or all of the Restricted Securities (I) to any Permitted Transferee or (II) pursuant to a court order or settlement agreement related to the distribution of assets in connection with the dissolution of marriage or civil union; provided, however, that in either of cases (I) or (II), it shall be a condition to such transfer that such transfer complies with the Securities Act of 1933, as amended, and other applicable law, and that the transferee executes and delivers to the Purchaser an agreement stating that the transferee is receiving and holding the Restricted Securities subject to the provisions of this Agreement applicable to the Subject Party, and there shall be no further transfer of such Restricted Securities except in accordance with this Agreement. As used in this Agreement, the term “Permitted Transferee” shall mean: (1) the members of the Subject Party’s immediate family (for purposes of this Agreement, “immediate family” shall mean with respect to any natural person, any of the following: such person’s spouse or domestic partner, the siblings of such person and his or her spouse or domestic partner, and the direct descendants and ascendants (including adopted and step children and parents) of such person and his or her spouses or domestic partners and siblings), (2) any trust for the direct or indirect benefit of the Subject Party or the immediate family of the Subject Party, (3) if the Subject Party is a trust, to the trustor or beneficiary of such trust or to the estate of a beneficiary of such trust, (4) in the case of an entity, officers, directors, general partners, limited partners, members, or stockholders of such entity that receive such transfer as a distribution, or related investment funds or vehicles controlled or managed by such persons or their respective affiliates, (5) to any affiliate of the Subject Party, and (6) any transferee whereby there is no change in beneficial ownership. The Subject Party further agrees to execute such agreements as may be reasonably requested by the Purchaser that are consistent with the foregoing or that are necessary to give further effect thereto.

Draft better contracts in just 5 minutes Get the weekly Law Insider newsletter packed with expert videos, webinars, ebooks, and more!