Annexation If the Property is located outside the limits of a municipality, Seller notifies Buyer under §5.011, Texas Property Code, that the Property may now or later be included in the extraterritorial jurisdiction of a municipality and may now or later be subject to annexation by the municipality. Each municipality maintains a map that depicts its boundaries and extraterritorial jurisdiction. To determine if the Property is located within a municipality’s extraterritorial jurisdiction or is likely to be located within a municipality’s extraterritorial jurisdiction, contact all municipalities located in the general proximity of the Property for further information.
No Annexation Any and all equipment placed on the premises of a Party shall be and remain the property of the Party providing such equipment regardless of the mode and manner of annexation or attachment to real property, unless otherwise mutually agreed by the Party providing such equipment and the Party receiving such equipment.
Provisioning Line Splitting and Splitter Space 3.8.1 The Data LEC, Voice CLEC or BellSouth may provide the splitter. When CCI or its authorized agent owns the splitter, Line Splitting requires the following: a non- designed analog loop from the serving wire center to the network interface device (NID) at the end user’s location; a collocation cross connection connecting the loop to the collocation space; a second collocation cross connection from the collocation space connected to a voice port; the high frequency spectrum line activation, and a splitter. The loop and port cannot be a loop and port combination (i.e. UNE-P), but must be individual stand-alone network elements. When BellSouth owns the splitter, Line Splitting requires the following: a non designed analog loop from the serving wire center to the network interface device (NID) at the end user’s location with CFA and splitter port assignments, and a collocation cross connection from the collocation space connected to a voice port. 3.8.2 An unloaded 2-wire copper loop must serve the end user. The meet point for the Voice CLEC and the Data LEC is the point of termination on the MDF for the Data LEC's cable and pairs. 3.8.3 The foregoing procedures are applicable to migration to Line Splitting Service from a UNE-P arrangement, BellSouth Retail Voice Service, BellSouth High Frequency Spectrum (CO Based) Line Sharing. 3.8.4 For other migration scenarios to line splitting, BellSouth will work cooperatively with CLECs to develop methods and procedures to develop a process whereby a Voice CLEC and a Data LEC may provide services over the same loop.
Project Completion The Contractor agrees to schedule a final job walk with the County. If required, the County will prepare a list of incomplete items, the “Punch List”. The Contractor agrees to complete the “Punch List” corrections and schedule a final project completion job walk. The County will sign the “Punch List” as completed when determined, the project is finished. The Contractor agrees to submit the following along with its final payment request:
FUND TRANSFER FACILITIES VIA TBS The Account Holder may apply, in accordance with the Bank’s prescribed procedure then prevailing and the Bank may, in its reasonable discretion, permit the Account Holder to operate such fund transfer facilities via the TBS, including without limitation, GIRO or direct debit banking system as may be made available by the Bank from time to time. The Account Holder acknowledges that the operation of such fund transfer facilities shall be subject to the relevant terms and conditions governing such facilities.
Unbundled Loop Modifications (Line Conditioning 2.5.1 Line Conditioning is defined as routine network modification that BellSouth regularly undertakes to provide xDSL services to its own customers. This may include the removal of any device, from a copper Loop or copper Subloop that may diminish the capability of the Loop or Subloop to deliver high-speed switched wireline telecommunications capability, including xDSL service. Such devices include, load coils, excessive bridged taps, low pass filters, and range extenders. Excessive bridged taps are bridged taps that serves no network design purpose and that are beyond the limits set according to industry standards and/or the BellSouth’s TR 73600 Unbundled Local Loop Technical Specification. 2.5.2 BellSouth will remove load coils only on copper Loops and Subloops that are less than eighteen thousand (18,000) feet in length. 2.5.3 For any copper loop being ordered by NewPhone which has over six thousand (6,000) feet of combined bridged tap will be modified, upon request from NewPhone, so that the loop will have a maximum of six thousand (6,000) feet of bridged tap. This modification will be performed at no additional charge to NewPhone. Loop conditioning orders that require the removal of bridged tap that serves no network design purpose on a copper Loop that will result in a combined total of bridged tap between two thousand five hundred (2,500) and six thousand (6,000) feet will be performed at the rates set forth in Exhibit A. 2.5.4 NewPhone may request removal of any unnecessary and non-excessive bridged tap (bridged tap between zero (0) and two thousand five hundred (2,500) feet which serves no network design purpose), at rates pursuant to BellSouth’s SC Process as mutually agreed to by the Parties. 2.5.5 Rates for ULM are as set forth in Exhibit A. 2.5.6 BellSouth will not modify a Loop in such a way that it no longer meets the technical parameters of the original Loop type (e.g., voice grade, ADSL, etc.) being ordered. 2.5.7 If NewPhone requests ULM on a reserved facility for a new Loop order, BellSouth may perform a pair change and provision a different Loop facility in lieu of the reserved facility with ULM if feasible. The Loop provisioned will meet or exceed specifications of the requested Loop facility as modified. NewPhone will not be charged for ULM if a different Loop is provisioned. For Loops that require a DLR or its equivalent, BellSouth will provide LMU detail of the Loop provisioned. 2.5.8 NewPhone shall request Loop make up information pursuant to this Attachment prior to submitting a service inquiry and/or a LSR for the Loop type that NewPhone desires BellSouth to condition. 2.5.9 When requesting ULM for a Loop that BellSouth has previously provisioned for NewPhone, NewPhone will submit a SI to BellSouth. If a spare Loop facility that meets the Loop modification specifications requested by NewPhone is available at the location for which the ULM was requested, NewPhone will have the option to change the Loop facility to the qualifying spare facility rather than to provide ULM. In the event that BellSouth changes the Loop facility in lieu of providing ULM, NewPhone will not be charged for ULM but will only be charged the service order charges for submitting an order.
Project Completion Date It is agreed between the Parties that the Project Completion Date is <END DATE, YEAR>. If the Project is not completed by such date then, subject to an amendment agreed to between the Parties, Alberta Innovates may elect to terminate this Investment Agreement. In such event, Alberta Innovates will notify the Applicant of its decision to terminate as soon as reasonably practical and shall advise the Applicant of the effective date of termination. Alberta Innovates will have no liability or obligation to reimburse the Applicant for any Project Costs incurred after the effective date of termination and may require the Applicant to return any portions of the Investment which were spent on Ineligible Expenses. Additionally, any portion of the Investment not used and accounted for in accordance with this Agreement as of the Project Completion Date or earlier termination is repayable by the Applicant to AI at AI’s request.
PARTICULARS OF SUBJECT PROPERTY TITLE : The subsidiary title for the subject property has yet to be issued. MASTER LAND TITLE NO : NT 023219329 & NT 023126338 DISTRICT/STATE : Papar / Sabah TENURE : Perpetuity FLOOR AREA : 112.5 square metres (1,211 square feet) DEVELOPER/VENDOR : Teo Development Sdn Bhd (725157-A) REGISTERED OWNER : Xxx Xxxxx Xxx @ Xxxxx ASSIGNOR : Xxxxx Xxx Xxx ENCUMBRANCES : Assigned to RHB Bank Berhad [196501000373 (6171-M)] The subject property is located within Kimanis Industrial Park, Off Xxxxx Xxxxx - Xxxxxxx, 00000 Xxxxx, Xxxxx. The subject property is a 2-storey corner industrial building identified as Lot No.23, 2-Storey Corner, Kimanis Industrial Park and bearing postal address at Xxx Xx. 00, 0-Xxxxxx Xxxxxx, Kimanis Industrial Park, Off Xxxxx Xxxxx – Xxxxxxxx, 00000 Xxxxx, Xxxxx. The subject property will be sold “as is where is basis” and subject to a reserve price of RM 267,900.00 ( RINGGIT MALAYSIA: TWO HUNDRED SIXTY SEVEN THOUSAND AND NINE HUNDRED ONLY ) subject to the Conditions of Sale and by way of an Assignment from the above Assignee subject to consent being obtained by the successful bidder(“the Purchaser”) from the relevant authorities, if any, including all terms, conditions, stipulation and covenants which were and may be imposed by the relevant authority. All other fees, costs and charges relating to the transfer and assignment of the property shall be borne solely by the successful bidder (“the Purchaser”). Online bidders are further subject to the Terms & Conditions on xxx.xxxxxxxxxxxxxxxx.xxx All intending bidders are required to deposit 10% of the fixed reserve price by bank draft/ cashier’s order only in favour of RHB Bank Berhad prior to the auction sale with the under mentioned Auctioneer and the balance of the purchase price is to be settled within ninety (90) days from the date of auction to RHB Bank Berhad via XXXXXX. Details of payment via XXXXXX please liaise with Messrs Xxxx Xxxxxx Xxxx & Xxxx. For further particulars, please contact MESSRS XXXX XXXXXX XXXX & XXXX, Solicitors for Assignee herein whose address is at Xxx 0 & 0, Xxxxx 0, Xxxxx Xxxxxxx Xxxxx Xxxxxxxx, X. X. Box 80805 87018 Federal Territory of Labuan. Tel: 000-000000 / Fax: 000-000000. [Ref: L-MW/III/U- 2(118)(KL)/JTCL/cyh] or under mentioned Auctioneer. Dalam menjalankan xxx xxx kuasa xxxx diberi kepada Pihak Pemegang Serah xxx xxx di bawah Perjanjian Kemudahan, Surat Ikatan Penyerahan Hak (Penyerahan Hak Pihak Pertama) xxx Surat Kuasa Wakil (Pihak Pertama) kesemuanya bertarikh 15hb April 2013 di antara Pihak Pemegang Serah Xxx xxx Pihak Penyerah Xxx xxx dalam Perjanjian Jual Beli antara Pihak Penyerah Hak xxx Xxx Development Sdn Bhd (“Pemaju”) xxx Xxx Tiong Hoe @ Xxxxx (“Tuantanah”) bertarikh 19hb November 2012, adalah dengan ini diisytiharkan bahawa Pihak Pemegang Xxxxx xxx dengan dibantu oleh Xxxxxxxx yang tersebut di bawah.
Participating TO’s Interconnection Facilities The Participating TO shall design, procure, construct, install, own and/or control the Participating TO’s Interconnection Facilities described in Appendix A at the sole expense of the Interconnection Customer. Unless the Participating TO elects to fund the capital for the Participating TO’s Interconnection Facilities, they shall be solely funded by the Interconnection Customer.
Contract Closure Contracting Officer shall give appropriate written notice to Purchaser when Purchaser has complied with the terms of this contract. Purchaser shall be paid refunds due from Timber Sale Account un- der B4.24 and excess cooperative deposits under B4.218.
