Common use of ASBESTOS REMOVAL WORKS Clause in Contracts

ASBESTOS REMOVAL WORKS. (a) All works removing asbestos containing materials must be carried out by a suitably licensed asbestos removalist duly licensed with Safework NSW, holding either a Friable (Class A) or a Non- Friable (Class B) Asbestos Removal Licence which ever applies. A copy of the relevant licence shall be made available to any authorised Council officer on request within 24 hours. (b) Five days prior to the commencement of licensed asbestos removal, Safework NSW must be formally notified of the works. All adjoining properties and those opposite the development must be notified in writing of the dates and times when asbestos removal is to be conducted. The notification must identify the licensed asbestos removal contractor and include a contact person for the site together with telephone number and email address. (c) All work must be carried out in accordance with the Work Health and Safety Regulation 2011 and the NSW Government and Work Cover document entitled How to manage and control asbestos in the work place: Code of Practice (Safework NSW) December 2011 and the City of Sydney Managing Asbestos Policy dated 21 October 2013 and associated guidelines. (d) The asbestos removalist must use signs and barricades to clearly indicate the area where the asbestos removal work is being performed. Signs must be placed in positions so that people are aware of where the asbestos removal work area is and should remain in place until removal is completed and clearance to reoccupy has been granted. Responsibilities for the security and safety of the asbestos removal site and removal must be specified in the asbestos removal control plan (where required). This includes inaccessible areas that are likely to contain asbestos. (e) Warning signs must be placed so they inform all people nearby that asbestos removal work is taking place in the area. Signs must be placed at all of the main entry points to the asbestos removal work area where asbestos is present. These signs must be weatherproof, constructed of light-weight material and adequately secured so they remain in prominent locations. The signs must be in accordance with AS 1319 -1994 Safety Signs for the Occupational Environment for size, illumination, location and maintenance. (f) Asbestos waste must only be transported and disposed of at an EPA licensed waste facility. (g) No asbestos products are to be reused on the site (i.e. packing pieces, spacers, formwork or fill etc). (h) No asbestos laden skips or bins are to be left in any public place without the written approval of Council. (i) A site notice board must be located at the main entrance to the site in a prominent position and must have minimum dimensions of 841mm x 594mm (A1) with any text on the notice to be a minimum of 30 point type size. The site notice board must include the following: (i) contact person for the site; (ii) telephone and facsimile numbers and email address; and (iii) site activities and time frames.

ASBESTOS REMOVAL WORKS. (a) All works removing asbestos containing materials must be carried out by a suitably licensed asbestos removalist duly licensed with Safework NSW, holding either a Friable (Class A) or a Non- Non-Friable (Class B) Asbestos Removal Licence which ever applies. A copy of the relevant licence shall be made available to any authorised Council officer on request within 24 hours. (b) Five days prior to the commencement of licensed asbestos removal, Safework NSW must be formally notified of the works. All adjoining properties and those opposite the development must be notified in writing of the dates and times when asbestos removal is to be conducted. The notification must identify the licensed asbestos removal contractor and include a contact person for the site together with telephone number and email address. (c) All work must be carried out in accordance with the Work Health and Safety Regulation 2011 2017 and the NSW Government and Work Cover SafeWork NSW document entitled How to manage and control asbestos in the work place: Code of Practice (Safework NSW) December 2011 and the City of Sydney Managing Asbestos Policy dated 21 October 2013 and associated guidelines. (d) The asbestos removalist must use signs and barricades to clearly indicate the area where the asbestos removal work is being performed. Signs must be placed in positions so that people are aware of where the asbestos removal work area is and should remain in place until removal is completed and clearance to reoccupy has been granted. Responsibilities for the security and safety of the asbestos removal site and removal must be specified in the asbestos removal control plan (where required). This includes inaccessible areas that are likely to contain asbestos. (e) Warning signs must be placed so they inform all people nearby that asbestos removal work is taking place in the area. Signs must be placed at all of the main entry points to the asbestos removal work area where asbestos is present. These signs must be weatherproof, constructed of light-weight material and adequately secured so they remain in prominent locations. The signs must be in accordance with AS 1319 -1994 Safety Signs for the Occupational Environment for size, illumination, location and maintenance. (f) Asbestos waste must only be transported and disposed of at an EPA licensed waste facility. (g) No asbestos products are to be reused on the site (i.e. packing pieces, spacers, formwork or fill etc). (h) No asbestos laden skips or bins are to be left in any public place without the written approval of Council. (i) A site notice board must be located at the main entrance to the site in a prominent position and must have minimum dimensions of 841mm x 594mm (A1) with any text on the notice to be a minimum of 30 point type size. The site notice board must include the following: (i) contact person for the site; (ii) telephone and facsimile numbers and email address; and (iii) site activities and time frames.

ASBESTOS REMOVAL WORKS. (a) All works removing asbestos containing materials must be carried out by a suitably licensed asbestos removalist duly licensed with Safework NSW, holding either a Friable (Class A) or a Non- Non-Friable (Class B) Asbestos Removal Licence which ever applies. A copy of the relevant licence shall must be made available to any authorised Council officer on request within 24 hours. (b) Five days prior to the commencement of licensed asbestos removal, Safework NSW must be formally notified of the works. All adjoining properties and those opposite the development must be notified in writing of the dates and times when asbestos removal is to be conducted. The notification must identify the licensed asbestos removal contractor and include a contact person for the site together with telephone number and email address. (c) All work must be carried out in accordance with the Work Health and Safety Regulation 2011 2017 and the NSW Government and Work Cover SafeWork NSW document entitled How to manage and control asbestos in the work place: Code of Practice (Safework NSW) December 2011 and the City of Sydney Managing Asbestos Policy dated 21 October 2013 and associated guidelines. (d) The asbestos removalist must use signs and barricades to clearly indicate the area where the asbestos removal work is being performed. Signs must be placed in positions so that people are aware of where the asbestos removal work area is and should remain in place until removal is completed and clearance to reoccupy has been granted. Responsibilities for the security and safety of the asbestos removal site and removal must be specified in the asbestos removal control plan (where required). This includes inaccessible areas that are likely to contain asbestos. (e) Warning signs must be placed so they inform all people nearby that asbestos removal work is taking place in the area. Signs must be placed at all of the main entry points to the asbestos removal work area where asbestos is present. These signs must be weatherproof, constructed of light-weight material and adequately secured so they remain in prominent locations. The signs must be in accordance with AS 1319 -1994 Safety Signs for the Occupational Environment for size, illumination, location and maintenance. (f) Asbestos waste must only be transported and disposed of at an EPA licensed waste facility. (g) No asbestos products are to be reused on the site (i.e. packing pieces, spacers, formwork or fill etc). (h) No asbestos laden skips or bins are to be left in any public place without the written approval of Council. (i) A site notice board must be located at the main entrance to the site in a prominent position and must have minimum dimensions of 841mm x 594mm (A1) with any text on the notice to be a minimum of 30 point type size. The site notice board must include the following: (i) contact person for the site; (ii) telephone and facsimile numbers and email address; and (iii) site activities and time frames.

ASBESTOS REMOVAL WORKS. (a) All works removing asbestos containing materials must be carried out by a suitably licensed asbestos removalist duly licensed with Safework NSW, holding either a Friable (Class A) or a Non- Non-Friable (Class B) Asbestos Removal Licence which ever applies. A copy of the relevant licence shall must be made available to any authorised Council officer on request within 24 hours. (b) Five days prior to the commencement of licensed asbestos removal, Safework NSW must be formally notified of the works. All adjoining properties and those opposite the development must be notified in writing of the dates and times when asbestos removal is to be conducted. The notification must identify the licensed asbestos removal contractor and include a contact person for the site together with telephone number and email address. (c) All work must be carried out in accordance with the Work Health and Safety Regulation 2011 Regulation, 2017 and the NSW Government and Work Cover SafeWork NSW document entitled How to manage and control asbestos in the work place: Code of Practice (Safework NSW) December 2011 and the City of Sydney Managing Asbestos Policy dated 21 October 2013 and associated guidelines. (d) The asbestos removalist must use signs and barricades to clearly indicate the area where the asbestos removal work is being performed. Signs must be placed in positions so that people are aware of where the asbestos removal work area is and should must remain in place until removal is completed and clearance to reoccupy has been granted. Responsibilities for the security and safety of the asbestos removal site and removal must be specified in the asbestos removal control plan (where required). This includes inaccessible areas that are likely to contain asbestos. (e) Warning signs must be placed so they inform all people nearby that asbestos removal work is taking place in the area. Signs must be placed at all of the main entry points to the asbestos removal work area where asbestos is present. These signs must be weatherproof, constructed of light-weight material and adequately secured so they remain in prominent locations. The signs must be in accordance with AS 1319 -1994 Safety Signs for the Occupational Environment for size, illumination, location and maintenance. (f) Asbestos waste must only be transported and disposed of at an EPA licensed waste facility. (g) No asbestos products are to be reused on the site (i.e. packing pieces, spacers, formwork or fill etc). (h) No asbestos laden skips or bins are to be left in any public place without the written approval of Council. (i) A site notice board must be located at the main entrance to the site in a prominent position and must have minimum dimensions of 841mm x 594mm (A1) with any text on the notice to be a minimum of 30 point type size. The site notice board must include the following: (i) contact person for the site; (ii) telephone and facsimile numbers and email address; and (iii) site activities and time frames.

ASBESTOS REMOVAL WORKS. (a) All works removing asbestos containing materials must be carried out by a suitably licensed asbestos removalist duly licensed with Safework WorkCover NSW, holding either a Friable (Class A) or a Non- Friable (Class B) Asbestos Removal Licence which ever applies. A copy of the relevant licence shall be made available to any authorised Council officer on request within 24 hours. (b) Five days prior to the commencement of licensed asbestos removal, Safework NSW WorkCover must be formally notified of the works. All adjoining properties and those opposite the development must be notified in writing of the dates and times when asbestos removal is to be conducted. The notification must is to identify the licensed asbestos removal contractor and include a contact person for the site together with telephone number and email address. (c) All work works must be carried out in accordance with the Work Health and Safety Regulation 2011 and the NSW Government and Work Cover WorkCover document entitled How to manage and control asbestos in the work place: Code of Practice (Safework NSWNSW WorkCover) December 2011 and the City of Sydney Managing Asbestos Policy dated 21 October 2013 and associated guidelinesPolicy. (d) The asbestos removalist must use signs and barricades to clearly indicate the area where the asbestos removal work is being performed. Signs must be placed in positions so that people are aware of where the asbestos removal work area is and should remain in place until removal is completed and clearance to reoccupy has been granted. Responsibilities for the security and safety of the asbestos removal site and removal must work area should be specified in the asbestos removal control plan (where required). This includes inaccessible areas that are likely to contain asbestos. (e) Warning signs must be placed so they inform all people nearby that asbestos removal work is taking place in the area. Signs must should be placed at all of the main entry points to the asbestos removal work area where asbestos is present. These signs must should be weatherproof, constructed of light-weight material and adequately secured so they remain in prominent locations. The signs must should be in accordance with AS 1319 -1994 1319-1994 Safety Signs signs for the Occupational Environment occupational environment for size, illumination, location and maintenance. (f) Asbestos waste to be disposed of must only be transported to waste facilities licensed to accept asbestos. The names and disposed location of at an EPA licensed waste facilitythese facilities are listed in Appendix F of the City of Sydney’s Managing Asbestos Guidelines. (g) No asbestos products are to be reused on the site (i.e. packing pieces, spacers, formwork or fill etc). (h) No asbestos laden skips or bins are to be left in any public place without the written approval of Council. (i) A site notice board must be located at the main entrance to the site in a prominent position and must have minimum dimensions of 841mm x 594mm (A1) with any text on the notice to be a minimum of 30 point type size. The site notice board must include the following: (i) contact person for the site; (ii) telephone and facsimile numbers and email address; and (iii) site activities and time frames.

ASBESTOS REMOVAL WORKS. (a) All works removing asbestos containing materials must be carried out by a suitably licensed asbestos removalist duly licensed with Safework NSW, holding either a Friable (Class A) or a Non- Non-Friable (Class B) Asbestos Removal Licence which ever applies. A copy of the relevant licence shall must be made available to any authorised Council officer on request within 24 hours. (b) Five days prior to the commencement of licensed asbestos removal, Safework NSW must be formally notified of the works. All adjoining properties and those opposite the development must be notified in writing of the dates and times when asbestos removal is to must be conducted. The notification must identify the licensed asbestos removal contractor and include a contact person for the site together with telephone number and email address. (c) All work must be carried out in accordance with the Work Health and Safety Regulation 2011 Regulation, 2017 and the NSW Government and Work Cover SafeWork NSW document entitled How to manage and control asbestos in the work place: Code of Practice (Safework NSW) December 2011 and the City of Sydney Managing Asbestos Policy dated 21 October 2013 and associated guidelines. (d) The asbestos removalist must use signs and barricades to clearly indicate the area where the asbestos removal work is being performed. Signs must be placed in positions so that people are aware of where the asbestos removal work area is and should must remain in place until removal is completed and clearance to reoccupy has been granted. Responsibilities for the security and safety of the asbestos removal site and removal must be specified in the asbestos removal control plan (where required). This includes inaccessible areas that are likely to contain asbestos. (e) Warning signs must be placed so they inform all people nearby that asbestos removal work is taking place in the area. Signs must be placed at all of the main entry points to the asbestos removal work area where asbestos is present. These signs must be weatherproof, constructed of light-weight material and adequately secured so they remain in prominent locations. The signs must be in accordance with AS 1319 -1994 Safety Signs for the Occupational Environment for size, illumination, location and maintenance. (f) Asbestos waste must only be transported and disposed of at an EPA licensed waste facility. (g) No asbestos products are to be reused on the site (i.e. packing pieces, spacers, formwork or fill etc). (h) No asbestos laden skips or bins are to be left in any public place without the written approval of Council. (i) A site notice board must be located at the main entrance to the site in a prominent position and must have minimum dimensions of 841mm x 594mm (A1) with any text on the notice to be a minimum of 30 point type size. The site notice board must include the following: (i) contact person for the site; (ii) telephone and facsimile numbers and email address; and (iii) site activities and time frames.

ASBESTOS REMOVAL WORKS. (a) All works removing asbestos containing materials must be carried out by a suitably licensed asbestos removalist duly licensed with Safework NSW, holding either a Friable (Class A) or a Non- Non-Friable (Class B) Asbestos Removal Licence which ever applies. A copy of the relevant licence shall be made available to any authorised Council officer on request within 24 hours. (b) Five days prior to the commencement of licensed asbestos removal, Safework NSW must be formally notified of the works. All adjoining properties and those opposite the development must be notified in writing of the dates and times when asbestos removal is to be conducted. The notification must identify the licensed asbestos removal contractor and include a contact person for the site together with telephone number and email address. (c) All work must be carried out in accordance with the Work Health and Safety Regulation 2011 2017 and the NSW Government and Work Cover SafeWork NSW document entitled How to manage and control asbestos in the work place: Code of Practice (Safework NSW) December 2011 and the City of Sydney Managing Asbestos Policy dated 21 October 2013 and associated guidelines. (d) The asbestos removalist must use signs and barricades to clearly indicate the area where the asbestos removal work is being performed. Signs must be placed in positions so that people are aware of where the asbestos removal work area is and should remain in place until removal is completed and clearance to reoccupy has been granted. Responsibilities for the security and safety of the asbestos removal site and removal must be specified in the asbestos removal control plan (where required). This includes inaccessible areas that are likely to contain asbestos. (e) Warning signs must be placed so they inform all people nearby that asbestos removal work is taking place in the area. Signs must be placed at all of the main entry points to the asbestos removal work area where asbestos is present. These signs must be weatherproof, constructed of light-weight material and adequately secured so they remain in prominent locations. The signs must be in accordance with AS 1319 -1994 - 1994 Safety Signs for the Occupational Environment for size, illumination, location and maintenance. (f) Asbestos waste must only be transported and disposed of at an EPA licensed waste facility. (g) No asbestos products are to be reused on the site (i.e. packing pieces, spacers, formwork or fill etc). (h) No asbestos laden skips or bins are to be left in any public place without the written approval of Council. (i) A site notice board must be located at the main entrance to the site in a prominent position and must have minimum dimensions of 841mm x 594mm (A1) with any text on the notice to be a minimum of 30 point type size. The site notice board must include the following: (i) contact Contact person for the site; (ii) telephone Telephone and facsimile numbers and email address; and (iii) site Site activities and time frames.