Common use of Authority Property Clause in Contracts

Authority Property. 20.1. Where the Authority for the purpose of the Agreement issues Authority Property free of charge to the Contractor such property shall be and remain the property of the Authority. The Contractor shall not in any circumstances have a lien on the Authority Property and the Contractor shall take all reasonable steps to ensure that the title of the Authority to such Authority Property and the exclusion of any such lien are brought to the notice of all sub-contractors and other persons dealing with the Agreement. 20.2. Any Authority Property made available or otherwise received by the Contractor shall be deemed to be in good condition when received by or on behalf of the Contractor unless the Contractor notifies the Authority otherwise within 5 Working Days of receipt. 20.3. The Contractor shall maintain all Authority Property in good order and condition, excluding fair wear and tear, and shall use Authority Property solely in connection with the Agreement and for no other purpose without prior Approval. 20.4. The Contractor shall notify the Contract Manager of any surplus Authority Property remaining after the expiry, termination and/or partial termination (as appropriate) of the Agreement and shall dispose of it as the Authority may direct. Waste of such Authority Property arising from bad workmanship or negligence of the Contractor or any of the Contractor’s employees, servants, agents, suppliers or sub-contractors shall be made good at the Contractor’s expense. Without prejudice to any other rights of the Authority, the Contractor shall deliver up Authority Property whether processed or not to the Authority on demand. 20.5. The Contractor shall ensure the security of all Authority Property, whilst in the Contractor’s possession, either on its premises or elsewhere during the performance of the Agreement, in accordance with the Authority’s reasonable security requirements as required from time to time. 20.6. The Contractor shall be liable for any and all loss of or damage (excluding fair wear and tear) to any Authority Property, unless the Contractor is able to demonstrate that such loss or damage was caused by the negligence or Default of the Authority. The Contractor’s liability set out in this clause shall be reduced to the extent that such loss or damage was contributed to by the negligence or Default of the Authority. The Contractor shall inform the Contract Manager within 2 Working Days of becoming aware of any defects appearing in or losses or damage occurring to Authority Property made available for the purposes of the Agreement.

Authority Property. 20.1. Where the Authority for the purpose of the Agreement issues Authority Property free of charge to the Contractor such property shall be and remain the property of the Authority. The Contractor shall not in any circumstances have a lien on the Authority Property and the Contractor shall take all reasonable steps to ensure that the title of the Authority to such Authority Property and the exclusion of any such lien are brought to the notice of all sub-contractors and other persons dealing with the Agreement. 20.2. Any Authority Property made available or otherwise received by the Contractor shall be deemed to be in good condition when received by or on behalf of the Contractor unless the Contractor notifies the Authority otherwise within 5 Working Days of receipt. 20.3. The Contractor shall maintain all Authority Property in good order and condition, excluding fair wear and tear, and shall use Authority Property solely in connection with the Agreement and for no other purpose without prior Approval. 20.4. The Contractor shall notify the Contract Manager of any surplus Authority Property remaining after the expiry, termination and/or partial termination (as appropriate) of the Agreement and shall dispose of it as the Authority may direct. Waste of such Authority Property arising from bad workmanship or negligence of the Contractor or any of the Contractor’s employees, servants, agents, suppliers or sub-contractors shall be made good at the Contractor’s expense. Without prejudice to any other rights of the Authority, the Contractor shall deliver up Authority Property whether processed or not to the Authority on demand. 20.5. The Contractor shall ensure the security of all Authority Property, whilst in the Contractor’s possession, either on its premises or elsewhere during the performance of the Agreement, in accordance with the Authority’s reasonable security requirements as required from time to time. 20.6. The Contractor shall be liable for any and all loss of or damage (excluding fair wear and tear) to any Authority Property, unless the Contractor is able to demonstrate that such loss or damage was caused by the negligence or Default default of the Authority. The Contractor’s liability set out in this clause shall be reduced to the extent that such loss or damage was contributed to by the negligence or Default default of the Authority. The Contractor shall inform the Contract Manager within 2 Working Days of becoming aware of any defects appearing in or losses or damage occurring to Authority Property made available for the purposes of the Agreement. Sub-Contracting for the delivery of the Services Where the Contractor enters into a sub-contract with a supplier or contractor for the purpose of performing the Agreement, it shall cause a term to be included in such a sub-contract which requires payment to be made of undisputed sums by the Contractor to the sub-contractor within a specified period not exceeding 30 days from the receipt of a valid invoice, as defined by the sub-contract requirements. Offers of Employment For the duration of the Agreement and for a period of 12 months thereafter the Contractor shall not employ or offer employment to any of the Authority’s staff who have been associated with the procurement and/or the contract management of the Services without the Authority’s prior Approval.

Authority Property. 20.1. Where the Authority for the purpose of the Agreement issues Authority Property free of charge to the Contractor Supplier such property shall be and remain the property of the Authority. The Contractor Supplier shall not in any circumstances have a lien on the Authority Property and the Contractor Supplier shall take all reasonable steps to ensure that the title of the Authority to such Authority Property and the exclusion of any such lien are brought to the notice of all sub-contractors and other persons dealing with the Agreement. 20.2. Any Authority Property made available or otherwise received by the Contractor Supplier shall be deemed to be in good condition when received by or on behalf of the Contractor Supplier unless the Contractor Supplier notifies the Authority otherwise within 5 Working Days of receipt. 20.3. The Contractor Supplier shall maintain all Authority Property in good order and condition, excluding fair wear and tear, and shall use Authority Property solely in connection with the Agreement and for no other purpose without prior Approval. 20.4. The Contractor Supplier shall notify the Contract Manager of any surplus Authority Property remaining after the expiry, termination and/or partial termination (as appropriate) of the Agreement and shall dispose of it as the Authority may direct. Waste of such Authority Property arising from bad workmanship or negligence of the Contractor Supplier or any of the Contractor’s employees, servants, agents, suppliers or sub-contractors SupplierStaff shall be made good at the ContractorSupplier’s expense. Without prejudice to any other rights of the Authority, the Contractor Supplier shall deliver up Authority Property whether processed or not to the Authority on demand. 20.5. The Contractor Supplier shall ensure the security of all Authority Property, whilst in the ContractorSupplier’s possession, either on its premises or elsewhere during the performance of the Agreement, in accordance with the Authority’s reasonable security requirements as required from time to time. 20.6. The Contractor Supplier shall be liable for any and all loss of or damage (excluding fair wear and tear) to any Authority Property, unless the Contractor Supplier is able to demonstrate that such loss or damage was caused by the negligence or Default of the Authority. The ContractorSupplier’s liability set out in this clause shall be reduced to the extent that such loss or damage was contributed to by the negligence or Default of the Authority. The Contractor shall inform the Contract Manager within 2 Working Days of becoming aware of any defects appearing in or losses or damage occurring to Authority Property made available for the purposes of the Agreement.be

Authority Property. 20.1. Where the Authority for the purpose of the Agreement issues Authority Property free of charge to the Contractor such property shall be and remain the property of the Authority. The Contractor shall not in any circumstances have a lien on the Authority Property and the Contractor shall take all reasonable steps to ensure that the title of the Authority to such Authority Property and the exclusion of any such lien are brought to the notice of all sub-contractors and other persons dealing with the Agreement. 20.2. Any Authority Property made available or otherwise received by the Contractor shall be deemed to be in good condition when received by or on behalf of the Contractor unless the Contractor notifies the Authority otherwise within 5 Working Days of receipt. 20.3. The Contractor shall maintain all Authority Property in good order and condition, excluding fair wear and tear, and shall use Authority Property solely in connection with the Agreement and for no other purpose without prior Approval. 20.4. The Contractor shall notify the Contract Manager of any surplus Authority Property remaining after the expiry, termination and/or partial termination (as appropriate) of the Agreement and shall dispose of it as the Authority may direct. Waste of such Authority Property arising from bad workmanship or negligence of the Contractor or any of the Contractor’s employees, servants, agents, suppliers or sub-contractors shall be made good at the Contractor’s expense. Without prejudice to any other rights of the Authority, the Contractor shall deliver up Authority Property whether processed or not to the Authority on demand.’s 20.5. The Contractor shall ensure the security of all Authority Property, whilst in the Contractor’s possession, either on its premises or elsewhere during the performance of the Agreement, in accordance with the Authority’s reasonable security requirements as required from time to time. 20.6. The Contractor shall be liable for any and all loss of or damage (excluding fair wear and tear) to any Authority Property, unless the Contractor is able to demonstrate that such loss or damage was caused by the negligence or Default default of the Authority. The Contractor’s liability set out in this clause shall be reduced to the extent that such loss or damage was contributed to by the negligence or Default default of the Authority. The Contractor shall inform the Contract Manager within 2 Working Days of becoming aware of any defects appearing in or losses or damage occurring to Authority Property made available for the purposes of the Agreement.

Authority Property. ‌ 20.1. Where the Authority for the purpose of the Agreement issues Authority Property free of charge to the Contractor such property shall be and remain the property of the Authority. The Contractor shall not in any circumstances have a lien on the Authority Property and the Contractor shall take all reasonable steps to ensure that the title of the Authority to such Authority Property and the exclusion of any such lien are brought to the notice of all sub-contractors and other persons dealing with the Agreement. 20.2. Any Authority Property made available or otherwise received by the Contractor shall be deemed to be in good condition when received by or on behalf of the Contractor unless the Contractor notifies the Authority otherwise within 5 Working Days of receipt. 20.3. The Contractor shall maintain all Authority Property in good order and condition, excluding fair wear and tear, and shall use Authority Property solely in connection with the Agreement and for no other purpose without prior Approval. 20.4. The Contractor shall notify the Contract Manager of any surplus Authority Property remaining after the expiry, termination and/or partial termination (as appropriate) of the Agreement and shall dispose of it as the Authority may direct. Waste of such Authority Property arising from bad workmanship or negligence of the Contractor or any of the Contractor’s employees, servants, agents, suppliers or sub-contractors shall be made good at the Contractor’s expense. Without prejudice to any other rights of the Authority, the Contractor shall deliver up Authority Property whether processed or not to the Authority on demand. 20.5. The Contractor shall ensure the security of all Authority Property, whilst in the Contractor’s possession, either on its premises or elsewhere during the performance of the Agreement, in accordance with the Authority’s reasonable security requirements as required from time to time. 20.6. The Contractor shall be liable for any and all loss of or damage (excluding fair wear and tear) to any Authority Property, unless the Contractor is able to demonstrate that such loss or damage was caused by the negligence or Default of the Authority. The Contractor’s liability set out in this clause shall be reduced to the extent that such loss or damage was contributed to by the negligence or Default of the Authority. The Contractor shall inform the Contract Manager within 2 Working Days of becoming aware of any defects appearing in or losses or damage occurring to Authority Property made available for the purposes of the Agreement.

Authority Property. 20.132.1. Where the Authority for the purpose of the Agreement Contract issues Authority Property free of charge to the Contractor such property shall be and remain the property of the Authority. The Contractor shall not in any circumstances have a lien on the Authority Property and the Contractor shall take all reasonable steps to ensure that the title of the Authority to such Authority Property and the exclusion of any such lien are brought to the notice of all suppliers, sub-contractors and other persons dealing with the AgreementContract. 20.232.2. Any Authority Property made available or otherwise received by the Contractor shall be deemed to be in good condition when received by or on behalf of the Contractor unless the Contractor notifies the Authority otherwise within 5 [5] Working Days of receipt. 20.332.3. The Contractor shall maintain all Authority Property in good order and condition, excluding fair wear and tear, and shall use Authority Property solely in connection with the Agreement Contract and for no other purpose without prior Approval. 20.432.4. The Contractor shall notify the Contract Manager of any surplus Authority Property remaining after the expiry, termination and/or partial termination (as appropriate) of the Agreement Contract and shall dispose of it as the Authority may direct. Waste of such Authority Property arising from bad workmanship or negligence of the Contractor or any of the Contractor’s employees, servants, agents, suppliers suppliers, or sub-contractors shall be made good at the Contractor’s expense. Without prejudice to any other rights of the Authority, the Contractor shall deliver up Authority Property whether processed or not to the Authority on demand. 20.532.5. The Contractor shall ensure the security of all Authority Property, whilst in the Contractor’s possession, either on its premises Premises or elsewhere during the performance of the AgreementContract, in accordance with the Authority’s reasonable security requirements as required from time to time. 20.632.6. The Contractor shall be liable for any and all loss of or damage (excluding fair wear and tear) to any Authority Property, unless the Contractor is able to demonstrate that such loss or damage was caused by the negligence or Default default of the Authority. The Contractor’s liability set out in this clause shall be reduced to the extent that such loss or damage was contributed to by the negligence or Default default of the Authority. The Contractor shall inform the Contract Manager within 2 two Working Days of becoming aware of any defects appearing in or losses or damage occurring to Authority Property made available for the purposes of the AgreementContract.

Authority Property. 20.1‌ 32.1. Where the Authority for the purpose of the Agreement Contract issues Authority Property free of charge to the Contractor such property shall be and remain the property of the Authority. The Contractor shall not in any circumstances have a lien on the Authority Property and the Contractor shall take all reasonable steps to ensure that the title of the Authority to such Authority Property and the exclusion of any such lien are brought to the notice of all suppliers, sub-contractors and other persons dealing with the AgreementContract. 20.232.2. Any Authority Property made available or otherwise received by the Contractor shall be deemed to be in good condition when received by or on behalf of the Contractor unless the Contractor notifies the Authority otherwise within 5 [5] Working Days of receipt. 20.332.3. The Contractor shall maintain all Authority Property in good order and condition, excluding fair wear and tear, and shall use Authority Property solely in connection with the Agreement Contract and for no other purpose without prior Approval. 20.432.4. The Contractor shall notify the Contract Manager of any surplus Authority Property remaining after the expiry, termination and/or partial termination (as appropriate) of the Agreement Contract and shall dispose of it as the Authority may direct. Waste of such Authority Property arising from bad workmanship or negligence of the Contractor or any of the Contractor’s employees, servants, agents, suppliers suppliers, or sub-contractors shall be made good at the Contractor’s expense. Without prejudice to any other rights of the Authority, the Contractor shall deliver up Authority Property whether processed or not to the Authority on demand. 20.532.5. The Contractor shall ensure the security of all Authority Property, whilst in the Contractor’s possession, either on its premises Premises or elsewhere during the performance of the AgreementContract, in accordance with the Authority’s reasonable security requirements as required from time to time. 20.632.6. The Contractor shall be liable for any and all loss of or damage (excluding fair wear and tear) to any Authority Property, unless the Contractor is able to demonstrate that such loss or damage was caused by the negligence or Default default of the Authority. The Contractor’s liability set out in this clause shall be reduced to the extent that such loss or damage was contributed to by the negligence or Default default of the Authority. The Contractor shall inform the Contract Manager within 2 two Working Days of becoming aware of any defects appearing in or losses or damage occurring to Authority Property made available for the purposes of the AgreementContract.

Authority Property. 20.1. 18.1 Where the Authority for the purpose of the Agreement issues Authority Property free of charge to the Contractor contractor on a hire basis, or at its discretion as a free issue, such property shall be and remain the property of the Authority. The Contractor shall not in any circumstances have a lien on the Authority Property and the Contractor shall take all reasonable steps to ensure that the title of the Authority to such Authority Property and the exclusion of any such lien are brought to the notice of all sub-contractors and other persons dealing with the Agreement. 20.2. 18.2 Any Authority Property made available or otherwise received by the Contractor shall be deemed to be in good condition when received by or on behalf of the Contractor unless the Contractor notifies the Authority otherwise within 5 Working Days of receipt. 20.3. 18.3 The Contractor shall maintain all Authority Property in good order and condition, excluding fair wear and tear, and shall use Authority Property solely in connection with the Agreement and for no other purpose without prior Approval. 20.4. The Contractor shall notify the Contract Manager of any surplus Authority Property remaining after the expiry, termination and/or partial termination (as appropriate) of the Agreement and shall dispose of it as the Authority may direct. Waste of such Authority Property arising from bad workmanship or negligence of the Contractor or any of the Contractor’s employees, servants, agents, suppliers or sub-contractors shall be made good at the Contractor’s expense. Without prejudice to any other rights of the Authority, the Contractor shall deliver up Authority Property whether processed or not to the Authority on demand. 20.5. 18.4 The Contractor shall ensure the security of all Authority Property, whilst in the Contractor’s possession, either on its premises or elsewhere during the performance of the Agreement, in accordance with the Authority’s reasonable security requirements as required from time to time. 20.6. 18.5 The Contractor shall be liable for any and all loss of or damage (excluding fair wear and tear) to any Authority Property, unless the Contractor is able to demonstrate that such loss or damage was caused by the negligence or Default default of the Authority. The Contractor’s liability set out in this clause shall be reduced to the extent that such loss or damage was contributed to by the negligence or Default default of the Authority. The Contractor shall inform the Contract Manager within 2 Working Days of becoming aware of any defects appearing in or losses or damage occurring to Authority Property made available for the purposes of the Agreement.