Automatic Testing Recording Clause Samples

Automatic Testing Recording. Each successful execution of an automated test sequence shall be recorded and stored in memory as a file. This file shall include all run data and stand parameters for the entire duration of the test, as well as include a time/date stamp that indicates start/finish time in hours/minutes/seconds as well as day month and year. Manual Controls The contractor shall provide tactile manual controls for the manual input of speed, individual torque, and UUT oil temperature. All manual controls shall be of an industrial, ruggedized style with redundant Hall Effect (or similar non-contact) position sensors for additional safety. Each controlled parameter shall have its own, individual manual control. Indicators shall be provided in close proximity of the controls to reflect the selected set point for each control. All controls shall be clearly labeled. Controls shall have integral dead-man switches to prevent inadvertent actuation. Manual operation shall require no more than one hand to operate each individual set point, and shall only require simple, linear, hand movements to actuate. For example, pushing a joystick forward to a set point is acceptable. Requiring multiple turns on a potentiometer to a set point is unacceptable. RDT&E Integration/Cyber Security 3.4.1. Upgrade to Windows 10 Operating System The new Host Computer and any other Personal Computer (PC), workstation, or embedded device running Microsoft Windows shall run Microsoft Windows, Secure Host Base Line (SHB) (formally known as DoD Unified Master Gold Disk (UMGD)) in compliance with DoD CIO Memo Migration to Windows 10 Secure Host Baseline. 3.4.2. Thumb-drives The use of USB “Thumb-drives” and all other flash media devices are banned from use within FRC-East.