Common use of Building and Structural Works Clause in Contracts

Building and Structural Works. a) Any alterations and additions to the ceiling shall be made of non-combustible materials. Changes to existing ceiling height must be indicated clearly. No PVC/plastic material is permitted for ceiling and wall finishes/fixtures due to toxicity reason unless otherwise specified by CMRL. b) Height and construction of any raised platform over existing floor to be indicated and must comply with authorities’ requirements. c) Coring in the floor slabs and walls is not allowed. d) Any hot work, heavy drilling, knocking, spray painting, varnishing or any other works that are hazardous, generate smell & create noise (if such works are approved by CMRL) that are likely to cause inconvenience to other Licensee and Commuters can only be conducted after train operation hours. e) The Licensee shall install a temporary water meter to tap water supply to its existing Licensed Premises for works requiring water, wherever possible. For Licensed Premises without water provision, the Licensee may bring water into the Licensed Premises by using water containers. Use of water hose is not allowed. Water consumed during any renovation works will be chargeable. f) False ceiling shall be constructed with non-combustible material. g) For any work that damages or affects the existing waterproofing system, the Licensee must reinstate the waterproofing system using the same supplier at their own cost and arrangement. Once work is completed, the Licensee shall submit the warranty to CMRL for record. h) Removal of inter-unit partitions: A licensee of multiple units may dismantle non- structural internal walls between units on the following conditions. i) Licensee obtains all necessary approvals from the relevant authorities. ii) Licensee bears the cost of design and construction. iii) Licensee shall reinstate the internal walls to its original condition upon expiry or earlier termination of the license.

Building and Structural Works. a) Any alterations and additions to the ceiling shall be made of non-combustible materials. Changes to existing ceiling height must be indicated clearly. No PVC/plastic material is permitted for ceiling and wall finishes/fixtures due to toxicity reason unless otherwise specified by CMRL. b) Height and construction of any raised platform over existing floor to be indicated and must comply with authorities’ authorities‟ requirements. c) Coring in the floor slabs and walls is not allowed. d) Any hot work, heavy drilling, knocking, spray painting, varnishing or any other works that are hazardous, generate smell & create noise (if such works are approved by CMRL) that are likely to cause inconvenience to other Licensee and Commuters can only be conducted after train operation hours. e) The Licensee shall install a temporary water meter to tap water supply to its existing Licensed Premises for works requiring water, wherever possible. For Licensed Premises without water provision, the Licensee may bring water into the Licensed Premises by using water containers. Use of water hose is not allowed. Water consumed during any renovation works will be chargeable. f) False ceiling shall be constructed with non-combustible material. g) For any work that damages or affects the existing waterproofing system, the Licensee must reinstate the waterproofing system using the same supplier at their own cost and arrangement. Once work is completed, the Licensee shall submit the warranty to CMRL for record. h) Removal of inter-unit partitions: A licensee of multiple units may dismantle non- structural internal walls between units on the following conditions. i) Licensee obtains all necessary approvals from the relevant authorities. ii) Licensee bears the cost of design and construction. iii) Licensee shall reinstate the internal walls to its original condition upon expiry or earlier termination of the license.