Common use of Buyer’s Compliance Clause in Contracts

Buyer’s Compliance. This price quotation and/or sales order is made on the assumption that the Buyer has taken all necessary steps to ensure that the Product application is in full compliance with the Local and State Building and Licensing Codes and Regulations, and meet and complies with their regulations and laws; including by not limited to those relating to safety and protection of the public, access, escape in case of fire, ventilation, lighting, and other usability or functionality requirements. Xxxxx agrees to comply with all applicable Local and State Building and Licensing Codes and Regulations, including but not limited to those in which the Product installation is taking place. Krown Lab, Inc. is not responsible for any violations of building, zoning or other municipal or government codes, ordinances or regulations existing in the building(s) into which its Products are to be installed and used. SITE AND APPLICATION SUITABILITY Krown Lab, Inc. is not responsible for the site and application suitability of its Products. Buyer is responsible to secure engineering and architectural approval to ensure that the final Product installation and application is suitable, complies with all local, state and national laws, safety requirements, mechanical and thermal loading, applicable codes, aesthetics and functionality, framing or mounting systems, structural elements, compatible glazing or other material, tolerances and expansion, breakage or failure scenarios, appropriate safety and health practices, conformance requirements, and performance requirements (collectively, the “Design Requirements”). Drawings provided by Krown Lab, Inc. are drawings for Buyer’s use, engineering, and architectural approval, as may be required to ensure compliance with all Design Requirements. Krown Lab, Inc. is not responsible for Design Requirements or for any engineering or architectural calculations, all such being the responsibility of Buyer. INSTALLATION All Krown Lab, Inc.’s Products are to be installed by qualified building professionals [experienced, competent tradesmen] with a comprehensive understanding of relevant material properties, and full building and site conditions. Krown Lab, Inc. is not responsible for decisions by aforementioned professionals, or anyone else involved in product installation, and therefore not responsible for installation or application suitability of its Products. Krown Lab, Inc. is further not responsible for the proper installation or performance of the door panel, or the specification or performance of any other surface, material, or product used in conjunction with Krown Lab, Inc.’s Products as part of the Design Requirements. Furthermore, Krown Lab, Inc. is not responsible for site conditions, including but not limited to, uneven floors or levels; walls being out of square or plumb; improperly supported headers or other structural element or substrate material involved in installation; inferior manufacturing or fabrication of any building material or product used in conjunction with its Products; for variations of size, design, or shape of existing or new drywall (or any other material); or by any other site-specific condition involving the application of its Products. Buyer acknowledges that to deviate, or to not comprehensively and precisely follow all Krown Lab, Inc provided specifications and installation instructions can result in unsafe or hazardous site conditions that can cause bodily harm or death. Xxxxx agrees to defend, indemnify and hold harmless Krown Lab, Inc. against all costs, damages, penalties, expenses, and fees in any way associated with the improper installation, maintenance, or use of its Products. GLASS CONDITIONS – IF APPLICABLE All tempered glass is subject to experience spontaneous breakage. Any and all specifications and installation instructions provided by Krown Lab, Inc. for glass is only in respect to installation of our Products. It is the responsibility of the Buyer, or its designated representative, in consultation with an independent engineering professional of their choosing, to determine and approve glass specification(s) suitable to meet all factors relevant to their particular use or application in conjunction with all Krown Lab, Inc.’s and our Manufacturing Partners’ Products. Krown Lab, Inc. is not responsible to ensure that the fabrication of glass is done in accordance with specifications provided Buyer by Krown Lab, Inc. or any other party. WARRANTY This Limited Warranty (“Warranty”) is extended by Krown Lab, Inc. ("Krown Lab, Inc.”) to the Original Purchaser (“Buyer”, “Customer”, "You", and its other forms) of Krownlab products (“Product(s)”). Xxxxx acknowledges that the provided Product Warranty and Installation Checklist Buyer is to be followed, completed, and submitted to Krown Lab, Inc. in order to be covered by Krown Lab, Inc.’s Limited Warranty. This Limited Warranty is non-transferrable, gives specific legal rights, and may grant other rights which vary from state to state. The Original Purchaser includes both the actual purchasing company as well as the owner(s) or tenant(s) of the interior space where the Product(s) are initially installed. Products provided by Krown Lab, Inc.’s Manufacturing Partners are covered by their own separate Warranty, which may differ from Krown Lab, Inc.’s. Products provided by Krown Lab, Inc.’s Manufacturing Partners are not covered by Krown Lab, Inc.’s Warranty. Krown Lab, Inc. will transfer to Buyer Warranties supplied by our Manufacturing Partners. Buyer acknowledges that improperly installed products are void of warranty and all Krownlab liability and obligations.

Buyer’s Compliance. This price quotation and/or sales order is made on the assumption that the Buyer has taken all necessary steps to ensure that the Product application is in full compliance with the Local and State Building and Licensing Codes and Regulations, and meet and complies with their regulations and laws; including by not limited to those relating to safety and protection of the public, access, escape in case of fire, ventilation, lighting, and other usability or functionality requirements. Xxxxx agrees to comply with all applicable Local and State Building and Licensing Codes and Regulations, including but not limited to those in which the Product installation is taking place. Krown Lablab, Inc. is not responsible for any violations of building, zoning or other municipal or government codes, ordinances or regulations existing in the building(s) into which its Products are to be installed and used. SITE AND APPLICATION SUITABILITY Krown Lab, Inc. is not responsible for the site and application suitability of its Products. Buyer is responsible to secure engineering and architectural approval to ensure that the final Product installation and application is suitable, complies with all local, state and national laws, safety requirements, mechanical and thermal loading, applicable codes, aesthetics and functionality, framing or mounting systems, structural elements, compatible glazing or other material, tolerances and expansion, breakage or failure scenarios, appropriate safety and health practices, conformance requirements, and performance requirements (collectively, the “Design Requirements”). Drawings provided by Krown Lab, Inc. are drawings for Buyer’s use, engineering, and architectural approval, as may be required to ensure compliance with all Design Requirements. Krown Lab, Inc. is not responsible for Design Requirements or for any engineering or architectural calculations, all such being the responsibility of Buyer. INSTALLATION All Krown Lablab, Inc.’s Products are to be installed by qualified building professionals [experienced, competent tradesmen] with a comprehensive understanding of relevant material properties, and full building and site conditions. Krown Lablab, Inc. is not responsible for decisions by aforementioned professionals, or anyone else involved in product installation, and therefore not responsible for installation or application suitability of its Products. Krown Lablab, Inc. is further not responsible for the proper installation or performance of the door panel, or the specification or performance of any other surface, material, or product used in conjunction with Krown Lablab, Inc.’s Products as part of the Design Requirements. Furthermore, Krown Lablab, Inc. is not responsible for site conditions, including but not limited to, uneven floors or levels; walls being out of square or plumb; improperly supported headers or other structural element or substrate material involved in installation; inferior manufacturing or fabrication of any building material or product used in conjunction with its Products; for variations of size, design, or shape of existing or new drywall (or any other material); or by any other site-specific condition involving the application of its Products. Buyer acknowledges that to deviate, or to not comprehensively and precisely follow all Krown Lab, Inc provided specifications and installation instructions can result in unsafe or hazardous site conditions that can cause bodily harm or death. Xxxxx agrees to defend, indemnify and hold harmless Krown Lab, Inc. against all costs, damages, penalties, expenses, and fees in any way associated with the improper installation, maintenance, or use of its Products. GLASS CONDITIONS – IF APPLICABLE All tempered glass is subject to experience spontaneous breakage. Any and all specifications and installation instructions provided by Krown Lab, Inc. for glass is only in respect to installation of our Products. It is the responsibility of the Buyer, or its designated representative, in consultation with an independent engineering professional of their choosing, to determine and approve glass specification(s) suitable to meet all factors relevant to their particular use or application in conjunction with all Krown Lab, Inc.’s and our Manufacturing Partners’ Products. Krown Lab, Inc. is not responsible to ensure that the fabrication of glass is done in accordance with specifications provided Buyer by Krown Lab, Inc. or any other party. WARRANTY This Limited Warranty (“Warranty”) is extended by Krown Lab, Inc. ("Krown Lab, Inc.”) to the Original Purchaser (“Buyer”, “Customer”, "You", and its other forms) of Krownlab products (“Product(s)”). Xxxxx Buyer acknowledges that the provided Product Warranty and Installation Checklist Buyer is to be followed, completed, and submitted to Krown Lab, Inc. in order to be covered by Krown Lab, Inc.’s Limited Warranty. This Limited Warranty is non-transferrable, gives specific legal rights, and may grant other rights which vary from state to state. The Original Purchaser includes both the actual purchasing company as well as the owner(s) or tenant(s) of the interior space where the Product(s) are initially installed. Products provided by Krown Lab, Inc.’s Manufacturing Partners are covered by their own separate Warranty, which may differ from Krown Lab, Inc.’s. Products provided by Krown Lab, Inc.’s Manufacturing Partners are not covered by Krown Lab, Inc.’s Warranty. Krown Lab, Inc. will transfer to Buyer Warranties supplied by our Manufacturing Partners. Buyer acknowledges that improperly installed products are void of warranty and all Krownlab liability and obligations.

Buyer’s Compliance. This price quotation and/or sales order is made on the assumption that the Buyer has taken all necessary steps to ensure that the Product application is in full compliance with the Local and State Building and Licensing Codes and Regulations, and meet and complies with their regulations and laws; including by not limited to those relating to safety and protection of the public, access, escape in case of fire, ventilation, lighting, and other usability or functionality requirements. Xxxxx agrees to comply with all applicable Local and State Building and Licensing Codes and Regulations, including but not limited to those in which the Product installation is taking place. Krown Lablab, Inc. is not responsible for any violations of building, zoning or other municipal or government codes, ordinances or regulations existing in the building(s) into which its Products are to be installed and used. SITE AND APPLICATION SUITABILITY Krown Lab, Inc. is not responsible for the site and application suitability of its Products. Buyer is responsible to secure engineering and architectural approval to ensure that the final Product installation and application is suitable, complies with all local, state and national laws, safety requirements, mechanical and thermal loading, applicable codes, aesthetics and functionality, framing or mounting systems, structural elements, compatible glazing or other material, tolerances and expansion, breakage or failure scenarios, appropriate safety and health practices, conformance requirements, and performance requirements (collectively, the “Design Requirements”). Drawings provided by Krown Lab, Inc. are drawings for Buyer’s use, engineering, and architectural approval, as may be required to ensure compliance with all Design Requirements. Krown Lab, Inc. is not responsible for Design Requirements or for any engineering or architectural calculations, all such being the responsibility of Buyer. INSTALLATION All Krown Lablab, Inc.’s Products are to be installed by qualified building professionals [experienced, competent tradesmen] with a comprehensive understanding of relevant material properties, and full building and site conditions. Krown Lablab, Inc. is not responsible for decisions by aforementioned professionals, or anyone else involved in product installation, and therefore not responsible for installation or application suitability of its Products. Krown Lablab, Inc. is further not responsible for the proper installation or performance of the door panel, or the specification or performance of any other surface, material, or product used in conjunction with Krown Lablab, Inc.’s Products as part of the Design Requirements. Furthermore, Krown Lablab, Inc. is not responsible for site conditions, including but not limited to, uneven floors or levels; walls being out of square or plumb; improperly supported headers or other structural element or substrate material involved in installation; inferior manufacturing or fabrication of any building material or product used in conjunction with its Products; for variations of size, design, or shape of existing or new drywall (or any other material); or by any other site-specific condition involving the application of its Products. Buyer acknowledges that to deviate, or to not comprehensively and precisely follow all Krown Lab, Inc provided specifications and installation instructions can result in unsafe or hazardous site conditions that can cause bodily harm or death. Xxxxx agrees to defend, indemnify and hold harmless Krown Lab, Inc. against all costs, damages, penalties, expenses, and fees in any way associated with the improper installation, maintenance, or use of its Products. GLASS CONDITIONS – IF APPLICABLE All tempered glass is subject to experience spontaneous breakage. Any and all specifications and installation instructions provided by Krown Lab, Inc. for glass is only in respect to installation of our Products. It is the responsibility of the Buyer, or its designated representative, in consultation with an independent engineering professional of their choosing, to determine and approve glass specification(s) suitable to meet all factors relevant to their particular use or application in conjunction with all Krown Lab, Inc.’s and our Manufacturing Partners’ Products. Krown Lab, Inc. is not responsible to ensure that the fabrication of glass is done in accordance with specifications provided Buyer by Krown Lab, Inc. or any other party. WARRANTY This Limited Warranty (“Warranty”) is extended by Krown Lab, Inc. ("Krown Lab, Inc.”) to the Original Purchaser (“Buyer”, “Customer”, "You", and its other forms) of Krownlab products (“Product(s)”). Xxxxx Buyer acknowledges that the provided Product Warranty and Installation Checklist Buyer is to be followed, completed, and submitted to Krown Lab, Inc. in order to be covered by Krown Lab, Inc.’s Limited Warranty. This Limited Warranty is non-transferrable, gives specific legal rights, and may grant other rights which vary from state to state. The Original Purchaser includes both the actual purchasing company as well as the owner(s) or tenant(s) of the interior space dwelling where the Product(s) are initially installed. Products provided by Krown Lab, Inc.’s Manufacturing Partners are covered by their own separate Warranty, which may differ from Krown Lab, Inc.’s. Products provided by Krown Lab, Inc.’s Manufacturing Partners are not covered by Krown Lab, Inc.’s Warranty. Krown Lab, Inc. will transfer to Buyer Warranties supplied by our Manufacturing Partners. Buyer acknowledges that improperly installed products are void of warranty and all Krownlab liability and obligations.

Buyer’s Compliance. This price quotation and/or sales order is made on the assumption that the Buyer has taken all necessary steps to ensure that the Product application is in full compliance with the Local and State Building and Licensing Codes and Regulations, and meet and complies with their regulations and laws; including by not limited to those relating to safety and protection of the public, access, escape in case of fire, ventilation, lighting, and other usability or functionality requirements. Xxxxx agrees to comply with all applicable Local and State Building and Licensing Codes and Regulations, including but not limited to those in which the Product installation is taking place. Krown Lablab, Inc. is not responsible for any violations of building, zoning or other municipal or government codes, ordinances or regulations existing in the building(s) into which its Products are to be installed and used. SITE AND APPLICATION SUITABILITY Krown Lab, Inc. is not responsible for the site and application suitability of its Products. Buyer is responsible to secure engineering and architectural approval to ensure that the final Product installation and application is suitable, complies with all local, state and national laws, safety requirements, mechanical and thermal loading, applicable codes, aesthetics and functionality, framing or mounting systems, structural elements, compatible glazing or other material, tolerances and expansion, breakage or failure scenarios, appropriate safety and health practices, conformance requirements, and performance requirements (collectively, the “Design Requirements”). Drawings provided by Krown Lab, Inc. are drawings for Buyer’s use, engineering, and architectural approval, as may be required to ensure compliance with all Design Requirements. Krown Lab, Inc. is not responsible for Design Requirements or for any engineering or architectural calculations, all such being the responsibility of Buyer. INSTALLATION All Krown Lablab, Inc.’s Products are to be installed by qualified building professionals [experienced, competent tradesmen] with a comprehensive understanding of relevant material properties, and full building and site conditions. Krown Lablab, Inc. is not responsible for decisions by aforementioned professionals, or anyone else involved in product installation, and therefore not responsible for installation or application suitability of its Products. Krown Lablab, Inc. is further not responsible for the proper installation or performance of the door panel, or the specification or performance of any other surface, material, or product used in conjunction with Krown Lablab, Inc.’s Products as part of the Design Requirements. Furthermore, Krown Lablab, Inc. is not responsible for site conditions, including but not limited to, uneven floors or levels; walls being out of square or plumb; improperly supported headers or other structural element or substrate material involved in installation; inferior manufacturing or fabrication of any building material or product used in conjunction with its Products; for variations of size, design, or shape of existing or new drywall (or any other material); or by any other site-specific condition involving the application of its Products. Buyer Xxxxx acknowledges that to deviate, or to not comprehensively and precisely follow all Krown Lab, Inc provided specifications and installation instructions can result in unsafe or hazardous site conditions that can cause bodily harm or death. Xxxxx agrees to defend, indemnify and hold harmless Krown Lab, Inc. against all costs, damages, penalties, expenses, and fees in any way associated with the improper installation, maintenance, or use of its Products. GLASS CONDITIONS – IF APPLICABLE All tempered glass is subject to experience spontaneous breakage. Any and all specifications and installation instructions provided by Krown Lab, Inc. for glass is only in respect to installation of our Products. It is the responsibility of the Buyer, or its designated representative, in consultation with an independent engineering professional of their choosing, to determine and approve glass specification(s) suitable to meet all factors relevant to their particular use or application in conjunction with all Krown Lab, Inc.’s and our Manufacturing Partners’ Products. Krown Lab, Inc. is not responsible to ensure that the fabrication of glass is done in accordance with specifications provided Buyer by Krown Lab, Inc. or any other party. WARRANTY This Limited Warranty (“Warranty”) is extended by Krown Lab, Inc. ("Krown Lab, Inc.”) to the Original Purchaser (“Buyer”, “Customer”, "You", and its other forms) of Krownlab products (“Product(s)”). Xxxxx Buyer acknowledges that the provided Product Warranty and Installation Checklist Buyer is to be followed, completed, and submitted to Krown Lab, Inc. in order to be covered by Krown Lab, Inc.’s Limited Warranty. This Limited Warranty is non-transferrable, gives specific legal rights, and may grant other rights which vary from state to state. The Original Purchaser includes both the actual purchasing company as well as the owner(s) or tenant(s) of the interior space dwelling where the Product(s) are initially installed. Products provided by Krown Lab, Inc.’s Manufacturing Partners are covered by their own separate Warranty, which may differ from Krown Lab, Inc.’s. Products provided by Krown Lab, Inc.’s Manufacturing Partners are not covered by Krown Lab, Inc.’s Warranty. Krown Lab, Inc. will transfer to Buyer Warranties supplied by our Manufacturing Partners. Buyer acknowledges that improperly installed products are void of warranty and all Krownlab liability and obligations.

Buyer’s Compliance. This price quotation and/or sales order is made on the assumption that the Buyer has taken all necessary steps to ensure that the Product application is in full compliance with the Local and State Building and Licensing Codes and Regulations, and meet and complies with their regulations and laws; including by not limited to those relating to safety and protection of the public, access, escape in case of fire, ventilation, lighting, and other usability or functionality requirements. Xxxxx agrees to comply with all applicable Local and State Building and Licensing Codes and Regulations, including but not limited to those in which the Product installation is taking place. Krown Lablab, Inc. is not responsible for any violations of building, zoning or other municipal or government codes, ordinances or regulations existing in the building(s) into which its Products are to be installed and used. SITE AND APPLICATION SUITABILITY Krown Lab, Inc. is not responsible for the site and application suitability of its Products. Buyer is responsible to secure engineering and architectural approval to ensure that the final Product installation and application is suitable, complies with all local, state and national laws, safety requirements, mechanical and thermal loading, applicable codes, aesthetics and functionality, framing or mounting systems, structural elements, compatible glazing or other material, tolerances and expansion, breakage or failure scenarios, appropriate safety and health practices, conformance requirements, and performance requirements (collectively, the “Design Requirements”). Drawings provided by Krown Lab, Inc. are drawings for Buyer’s use, engineering, and architectural approval, as may be required to ensure compliance with all Design Requirements. Krown Lab, Inc. is not responsible for Design Requirements or for any engineering or architectural calculations, all such being the responsibility of Buyer. INSTALLATION All Krown Lablab, Inc.’s Products are to be installed by qualified building professionals [experienced, competent tradesmen] with a comprehensive understanding of relevant material properties, and full building and site conditions. Krown Lablab, Inc. is not responsible for decisions by aforementioned professionals, or anyone else involved in product installation, and therefore not responsible for installation or application suitability of its Products. Krown Lablab, Inc. is further not responsible for the proper installation or performance of the door panel, or the specification or performance of any other surface, material, or product used in conjunction with Krown Lablab, Inc.’s Products as part of the Design Requirements. Furthermore, Krown Lablab, Inc. is not responsible for site conditions, including but not limited to, uneven floors or levels; walls being out of square or plumb; improperly supported headers or other structural element or substrate material involved in installation; inferior manufacturing or fabrication of any building material or product used in conjunction with its Products; for variations of size, design, or shape of existing or new drywall (or any other material); or by any other site-specific condition involving the application of its Products. Buyer acknowledges that to deviate, or to not comprehensively and precisely follow all Krown Lab, Inc provided specifications and installation instructions can result in unsafe or hazardous site conditions that can cause bodily harm or death. Xxxxx agrees to defend, indemnify and hold harmless Krown Lab, Inc. against all costs, damages, penalties, expenses, and fees in any way associated with the improper installation, maintenance, or use of its Products. GLASS CONDITIONS – IF APPLICABLE All tempered glass is subject to experience spontaneous breakage. Any and all specifications and installation instructions provided by Krown Lab, Inc. for glass is only in respect to installation of our Products. It is the responsibility of the Buyer, or its designated representative, in consultation with an independent engineering professional of their choosing, to determine and approve glass specification(s) suitable to meet all factors relevant to their particular use or application in conjunction with all Krown Lab, Inc.’s and our Manufacturing Partners’ Products. Krown Lab, Inc. is not responsible to ensure that the fabrication of glass is done in accordance with specifications provided Buyer by Krown Lab, Inc. or any other party. WARRANTY This Limited Warranty (“Warranty”) is extended by Krown Lab, Inc. ("Krown Lab, Inc.”) to the Original Purchaser (“Buyer”, “Customer”, "You", and its other forms) of Krownlab products (“Product(s)”). Xxxxx acknowledges that the provided Product Warranty and Installation Checklist Buyer is to be followed, completed, and submitted to Krown Lab, Inc. in order to be covered by Krown Lab, Inc.’s Limited Warranty. This Limited Warranty is non-transferrable, gives specific legal rights, and may grant other rights which vary from state to state. The Original Purchaser includes both the actual purchasing company as well as the owner(s) or tenant(s) of the interior space where the Product(s) are initially installed. Products provided by Krown Lab, Inc.’s Manufacturing Partners are covered by their own separate Warranty, which may differ from Krown Lab, Inc.’s. Products provided by Krown Lab, Inc.’s Manufacturing Partners are not covered by Krown Lab, Inc.’s Warranty. Krown Lab, Inc. will transfer to Buyer Warranties supplied by our Manufacturing Partners. Buyer acknowledges that improperly installed products are void of warranty and all Krownlab liability and obligations.