Common use of Buyer’s Compliance Clause in Contracts

Buyer’s Compliance. This price quotation and/or Sales Order is made upon the assumption that Buyer has taken all necessary steps to ensure that the Product installation and application is in full compliance with all applicable Local, State, and Federal Building Codes and Regulations, including by not limited to those relating to public safety, access, and egress. SITE AND APPLICATION SUITABILITY Krown Lab, Inc. is not responsible for site conditions, including but not limited to, uneven floors or levels; walls being out of square or plumb; improperly supported headers or other structural element or substrate material involved in installation; inferior manufacturing or fabrication of any building material or product used in conjunction with its Products; for variations of size, design, or shape of existing or new drywall (or any other material); or by any other site- specific condition involving the application of its Products. Krown Lab, Inc. is furthermore not responsible for the application suitability of its Products. Xxxxx is responsible for securing engineering and architectural approval to ensure that the final Product installation and application is suitable, including but not limited to mechanical and thermal loading; aesthetics and functionality; structural elements, including framing or mounting systems; material compatibility; tolerances and expansion; breakage or failure scenarios; conformance and performance requirements (collectively, the “Design Requirements”). Drawings provided by Krown Lab, Inc. are drawings for Xxxxx’s use, engineering, and architectural approval, as may be required to ensure compliance with all Design Requirements. Krown Lab, Inc. is not responsible for Design Requirements or for any engineering or architectural calculations, all such being the responsibility of Buyer. INSTALLATION All Krown Lab, Inc.’s Products are to be installed by qualified building professionals [experienced, competent tradesmen] with a comprehensive understanding of relevant material properties, and site conditions. Krown Lab, Inc. is not responsible for decisions by the aforementioned professionals, or anyone else involved in product installation. Krown Lab, Inc. is further not responsible for the proper installation or performance of the door panel, or the specification or performance of any other surface, material, or product used in conjunction with Krown Lab, Inc.’s Products as part of the Design Requirements. Buyer acknowledges that to deviate, or to not comprehensively and precisely follow all Krown Lab, Inc provided specifications and installation instructions can result in unsafe or hazardous site conditions that can cause bodily harm or death. Xxxxx agrees to defend, indemnify, and hold harmless Krown Lab, Inc. against all liability, including damages, penalties, expenses, and fees in any way associated with the improper installation, maintenance, or use of its Products. GLASS CONDITIONS – IF APPLICABLE All tempered glass is subject to experience spontaneous breakage. Any and all specifications and installation instructions provided by Krown Lab, Inc. for glass is only in respect to installation of Krown Lab, Inc.’s Products. It is the responsibility of the Buyer, or its designated representative, in consultation with an independent engineering professional of their choosing, to determine and approve glass specification(s) suitable to meet all factors relevant to their particular use or application in conjunction with all Krown Lab, Inc.’s and our Manufacturing Partners’ Products. Krown Lab, Inc. is not responsible to ensure that the fabrication of glass used in conjunction with Krown Lab, Inc.’s Products is performed in accordance with specifications provided Buyer by Krown Lab, Inc. or any other party. WARRANTY This Limited Warranty (“Warranty”) is extended by Krown Lab, Inc. ("Krown Lab, Inc.”) to the Original Purchaser (“Buyer”) of Krownlab products (“Product(s)”). Buyer acknowledges that any provided “Product Warranty and Installation Checklist” is to be followed, completed, and submitted to Krown Lab, Inc. in order to be covered by Krown Lab, Inc.’s Limited Warranty. This Limited Warranty is non-transferrable, gives specific legal rights, and may grant other rights which vary from state to state. The Buyer includes the purchasing entity and the owner(s) or tenant(s) of the site where the Product is installed. Products provided by Krown Lab, Inc.’s Manufacturing Partners are covered by their own separate Warranty, which may differ from Krown Lab, Inc.’s. Products provided by Krown Lab, Inc.’s Manufacturing Partners are not covered by Krown Lab, Inc.’s Warranty. Krown Lab, Inc. will transfer to Buyer warranties supplied by its Manufacturing Partners. Buyer acknowledges that improperly installed products are void of warranty and all Krownlab liability and obligations.

Buyer’s Compliance. This price quotation and/or Sales Order is made upon the assumption that Buyer has taken all necessary steps to ensure that the Product installation and application is in full compliance with all applicable Local, State, and Federal Building Codes and Regulations, including by not limited to those relating to public safety, access, and egress. SITE AND APPLICATION SUITABILITY Krown Lab, Inc. is not responsible for site conditions, including but not limited to, uneven floors or levels; walls being out of square or plumb; improperly supported headers or other structural element or substrate material involved in installation; inferior manufacturing or fabrication of any building material or product used in conjunction with its Products; for variations of size, design, or shape of existing or new drywall (or any other material); or by any other site- specific condition involving the application of its Products. Krown Lab, Inc. is furthermore not responsible for the application suitability of its Products. Xxxxx is responsible for securing engineering and architectural approval to ensure that the final Product installation and application is suitable, including but not limited to mechanical and thermal loading; aesthetics and functionality; structural elements, including framing or mounting systems; material compatibility; tolerances and expansion; breakage or failure scenarios; conformance and performance requirements (collectively, the “Design Requirements”). Drawings provided by Krown Lab, Inc. are drawings for Xxxxx’s use, engineering, and architectural approval, as may be required to ensure compliance with all Design Requirements. Krown Lab, Inc. is not responsible for Design Requirements or for any engineering or architectural calculations, all such being the responsibility of Buyer. INSTALLATION All Krown Lab, Inc.’s Products are to be installed by qualified building professionals [experienced, competent tradesmen] with a comprehensive understanding of relevant material properties, and site conditions. Krown Lab, Inc. is not responsible for decisions by the aforementioned professionals, or anyone else involved in product installation. Krown Lab, Inc. is further not responsible for the proper installation or performance of the door panel, or the specification or performance of any other surface, material, or product used in conjunction with Krown Lab, Inc.’s Products as part of the Design Requirements. Buyer acknowledges that to deviate, or to not comprehensively and precisely follow all Krown Lab, Inc provided specifications and installation instructions can result in unsafe or hazardous site conditions that can cause bodily harm or death. Xxxxx agrees to defend, indemnify, and hold harmless Krown Lab, Inc. against all liability, including damages, penalties, expenses, and fees in any way associated with the improper installation, maintenance, or use of its Products. GLASS CONDITIONS – IF APPLICABLE All tempered glass is subject to experience spontaneous breakage. Any and all specifications and installation instructions provided by Krown Lab, Inc. for glass is only in respect to installation of Krown Lab, Inc.’s Products. It is the responsibility of the Buyer, or its designated representative, in consultation with an independent engineering professional of their choosing, to determine and approve glass specification(s) suitable to meet all factors relevant to their particular use or application in conjunction with all Krown Lab, Inc.’s and our Manufacturing Partners’ Products. Krown Lab, Inc. is not responsible to ensure that the fabrication of glass used in conjunction with Krown Lab, Inc.’s Products is performed in accordance with specifications provided Buyer by Krown Lab, Inc. or any other party. WARRANTY This Limited Warranty (“Warranty”) is extended by Krown Lab, Inc. ("Krown Lab, Inc.Krownlab”) to the Original Purchaser original purchaser (“Buyer”) of Krownlab products (“Product(s)”)) and provides Buyer with specific legal rights, which may vary from state to state. Buyer acknowledges that any provided “Product Warranty and Installation Checklist” is Coverage & Period: Krownlab’s Products are warranted to be followed, completedfree of manufacturing defects upon delivery, and submitted to Krown Labremain free of such defects for ten (10) years (“Warranty Period”) from the date of purchase. The Warranty Period is not extended if Krownlab repairs or replaces a warranted Product. Krownlab may change the availability of this Warranty at its discretion, Inc. in order to but any changes will not be covered by Krown Lab, Inc.’s Limited Warrantyretroactive. This Limited Warranty extends only to the original purchaser of the Product(s) and is non-transferrable, gives specific legal rights, and may grant other rights which vary from state to state. The Buyer includes the purchasing entity and the owner(s) or tenant(s) of the site where the Product is installed. Products provided by Krown Lab, Inc.’s Krownlab's manufacturing partners ("Manufacturing Partners Partners") are covered by their own separate Warrantywarranty, which may differ from Krown Lab, Inc.’sthis Warranty. Products provided by Krown Lab, Inc.’s Krownlab's Manufacturing Partners are not covered by Krown Lab, Inc.’s this Warranty. Krown LabKrownlab's responsibility for defective Products is limited to repair, Inc. will transfer to Buyer warranties supplied by its Manufacturing Partnersreplacement or refund as set forth in this Warranty. Buyer acknowledges and agrees that improperly this Warranty is subject to confirmation that the Product was: (i) used for its intended purpose under the conditions for which it was designed following Krownlab’s product specifications and any other documentation or information made available to Buyer in conjunction with Product purchase; (ii) exclusively exposed to controlled interior climatic conditions (including but not limited to moderate levels of UV exposure, dust, humidity, and temperature fluctuations); (iii) installed products are void of warranty in compliance with engineering and/or architectural approval to ensure that the final Product installation and application is suitable, including but not limited to mechanical and thermal loading; aesthetics and functionality; structural elements, including framing or mounting systems; material compatibility; tolerances and expansion; breakage or failure scenarios; conformance and performance requirements; (iv) installed following all Krownlab liability applicable building codes and obligations.regulations; (v) installed following Krownlab’s installation instructions; and

Buyer’s Compliance. This price quotation and/or Sales Order is made upon the assumption that Buyer has taken all necessary steps to ensure that the Product installation and application is in full compliance with all applicable Local, State, and Federal Building Codes and Regulations, including by not limited to those relating to public safety, access, and egress. SITE AND APPLICATION SUITABILITY Krown Lab, Inc. is not responsible for site conditions, including but not limited to, uneven floors or levels; walls being out of square or plumb; improperly supported headers or other structural element or substrate material involved in installation; inferior manufacturing or fabrication of any building material or product used in conjunction with its Products; for variations of size, design, or shape of existing or new drywall (or any other material); or by any other site- specific condition involving the application of its Products. Krown Lab, Inc. is furthermore not responsible for the application suitability of its Products. Xxxxx is responsible for securing engineering and architectural approval to ensure that the final Product installation and application is suitable, including but not limited to mechanical and thermal loading; aesthetics and functionality; structural elements, including framing or mounting systems; material compatibility; tolerances and expansion; breakage or failure scenarios; conformance and performance requirements (collectively, the “Design Requirements”). Drawings provided by Krown Lab, Inc. are drawings for XxxxxBuyer’s use, engineering, and architectural approval, as may be required to ensure compliance with all Design Requirements. Krown Lab, Inc. is not responsible for Design Requirements or for any engineering or architectural calculations, all such being the responsibility of Buyer. INSTALLATION All Krown Lab, Inc.’s Products are to be installed by qualified building professionals [experienced, competent tradesmen] with a comprehensive understanding of relevant material properties, and site conditions. Krown Lab, Inc. is not responsible for decisions by the aforementioned professionals, or anyone else involved in product installation. Krown Lab, Inc. is further not responsible for the proper installation or performance of the door panel, or the specification or performance of any other surface, material, or product used in conjunction with Krown Lab, Inc.’s Products as part of the Design Requirements. Buyer acknowledges that to deviate, or to not comprehensively and precisely follow all Krown Lab, Inc provided specifications and installation instructions can result in unsafe or hazardous site conditions that can cause bodily harm or death. Xxxxx agrees to defend, indemnify, and hold harmless Krown Lab, Inc. against all liability, including damages, penalties, expenses, and fees in any way associated with the improper installation, maintenance, or use of its Products. GLASS CONDITIONS – IF APPLICABLE All tempered glass is subject to experience spontaneous breakage. Any and all specifications and installation instructions provided by Krown Lab, Inc. for glass is only in respect to installation of Krown Lab, Inc.’s Products. It is the responsibility of the Buyer, or its designated representative, in consultation with an independent engineering professional of their choosing, to determine and approve glass specification(s) suitable to meet all factors relevant to their particular use or application in conjunction with all Krown Lab, Inc.’s and our Manufacturing Partners’ Products. Krown Lab, Inc. is not responsible to ensure that the fabrication of glass used in conjunction with Krown Lab, Inc.’s Products is performed in accordance with specifications provided Buyer by Krown Lab, Inc. or any other party. WARRANTY This Limited Warranty (“Warranty”) is extended by Krown Lab, Inc. ("Krown Lab, Inc.”) to the Original Purchaser (“Buyer”) of Krownlab products (“Product(s)”). Buyer acknowledges that any provided “Product Warranty and Installation Checklist” is to be followed, completed, and submitted to Krown Lab, Inc. in order to be covered by Krown Lab, Inc.’s Limited Warranty. This Limited Warranty is non-transferrable, gives specific legal rights, and may grant other rights which vary from state to state. The Buyer includes the purchasing entity and the owner(s) or tenant(s) of the site where the Product is installed. Products provided by Krown Lab, Inc.’s Manufacturing Partners are covered by their own separate Warranty, which may differ from Krown Lab, Inc.’s. Products provided by Krown Lab, Inc.’s Manufacturing Partners are not covered by Krown Lab, Inc.’s Warranty. Krown Lab, Inc. will transfer to Buyer warranties supplied by its Manufacturing Partners. Buyer acknowledges that improperly installed products are void of warranty and all Krownlab liability and obligations.

Buyer’s Compliance. This price quotation and/or Sales Order sales order is made upon on the assumption that the Buyer has taken all necessary steps to ensure that the Product installation work which this quotation and application specifications refer to is in full compliance with all applicable Local, State, acceptable to the Local and Federal State Building and Licensing Codes and Regulations, and meet and complies with their regulations and laws; including by not limited to those relating to public safetysafety and protection of the public, access, escape in case of fire, ventilation, lighting, and egressother usability or functionality requirements. SITE AND APPLICATION SUITABILITY Xxxxx agrees to comply with all applicable Local and State Building and Licensing Codes and Regulations, including but not limited to those in which the build-out is taking place. Krown Lablab, Inc. is not responsible for any violations of building, zoning or other municipal or government codes, ordinances or regulations existing in the building(s) into which its Products are to be installed and used. INSTALLATION All Krown lab, Inc.’s Products are to be installed by qualified building professionals [experienced, competent tradesmen] with a comprehensive understanding of relevant material properties, and full building and site conditions. Krown lab, Inc. is not responsible for decisions by aforementioned professionals, or anyone else involved in product installation, and therefore not responsible for installation or application of its Products. Krown lab, Inc. is further not responsible for the proper installation or performance of the door panel, or the specification or performance of any other surface, material, or product used in conjunction with Krown lab, Inc.’s Products as part of the Design Requirements. Furthermore, Krown lab, Inc. is not responsible for site conditions, including but not limited to, uneven floors or levels; walls being out of square or plumb; improperly supported headers or other structural element or substrate material involved in installation; inferior manufacturing or fabrication of any building material or product used in conjunction with its Products; for variations of size, design, or shape of existing or new drywall (or any other material); or by any other site- site-specific condition involving the application of its Products. Krown Lab, Inc. is furthermore not responsible for the application suitability of its Products. Xxxxx is responsible for securing engineering and architectural approval to ensure that the final Product installation and application is suitable, including but not limited to mechanical and thermal loading; aesthetics and functionality; structural elements, including framing or mounting systems; material compatibility; tolerances and expansion; breakage or failure scenarios; conformance and performance requirements (collectively, the “Design Requirements”). Drawings provided by Krown Lab, Inc. are drawings for Xxxxx’s use, engineering, and architectural approval, as may be required to ensure compliance with all Design Requirements. Krown Lab, Inc. is not responsible for Design Requirements or for any engineering or architectural calculations, all such being the responsibility of Buyer. INSTALLATION All Krown Lab, Inc.’s Products are to be installed by qualified building professionals [experienced, competent tradesmen] with a comprehensive understanding of relevant material properties, and site conditions. Krown Lab, Inc. is not responsible for decisions by the aforementioned professionals, or anyone else involved in product installation. Krown Lab, Inc. is further not responsible for the proper installation or performance of the door panel, or the specification or performance of any other surface, material, or product used in conjunction with Krown Lab, Inc.’s Products as part of the Design Requirements. Buyer acknowledges that to deviate, or to not comprehensively and precisely follow all Krown Lab, Inc provided specifications and installation instructions can result in unsafe or hazardous site conditions that can cause bodily harm or death. Xxxxx agrees to defend, indemnify, indemnify and hold harmless Krown Lab, Inc. against all liabilitycosts, including damages, penalties, expenses, and fees in any way associated with the improper installation, maintenance, or use of its ProductsProducts unless specifically related to defects in material or workmanship. GLASS CONDITIONS – IF APPLICABLE All tempered glass is subject to experience spontaneous breakage. Any and all specifications and installation instructions provided by Krown Lab, Inc. for glass is only in respect to installation of Krown Lab, Inc.’s attachment to our Products. It is the responsibility of the Buyer, or its designated representative, in consultation with an independent engineering professional of their choosing, to determine and approve glass specification(s) suitable to meet all factors relevant to their particular use or application in conjunction with all Krown Lab, Inc.’s and (or our Manufacturing Partners’ ’) Products. Krown Lab, Inc. is not responsible to ensure that the fabrication of glass used in conjunction with Krown Lab, Inc.’s Products is performed done in accordance with specifications provided Buyer by Krown Lab, Inc. or any other party. WARRANTY This Limited Warranty (“Warranty”) is extended by Krown Lab, Inc. ("Krown Lab, Inc.”) to the Original Purchaser original purchaser (“Buyer”, “Customer”, "You", and its other forms) of Krownlab products (“Product(s)”). Buyer acknowledges that any provided “Product Warranty and Installation Checklist” is to be followed, completed, and submitted to Krown Lab, Inc. in order to be covered by Krown Lab, Inc.’s Limited Warranty. This Limited Warranty is non-transferrable, gives specific legal rights, and but You may grant have other rights which vary from state to state. The Buyer includes the purchasing entity and the owner(s) or tenant(s) of the site where the Product is installed. Products provided by Krown Lab, Inc.’s Manufacturing Partners are covered by their own separate Warranty, which may differ from Krown Lab, Inc.’s. Products provided by Krown Lab, Inc.’s Manufacturing Partners are not covered by Krown Lab, Inc.’s Warranty. Krown Lab, Inc. will transfer to Buyer warranties supplied by its Manufacturing Partners. Buyer acknowledges that improperly installed products are void of warranty and all Krownlab liability and obligations.