CABINET WORK/MILLWORK. A) Telephone backboard fire rated 4’- 0” x 8’- 0” x 3/4” (Allowance — One (1) per tenant space.)
CABINET WORK/MILLWORK Sample Clauses
Related to CABINET WORK/MILLWORK
Partitions (a) Partitions within the Premises shall have 2” gypsum board on each sided of 3-5/8” metal studs, 16’ on center, taped and spackled. Partitions between the Premises, corridor(s) and between the Premises and adjacent space, shall have 5/8” fire code gypsum board, taped and spackled, on each side of 3-5/8” metal studs, 16” on center above finished ceiling to underside of metal deck. Demising partitions and corridor partitions to have thermofibre insulation installed within, and to be constructed from floor to underside of metal deck above.
Interior (a) Ceilings, sidewalls and bulkhead panels shall be clean and free of cracks and stains;
NIGHTLY a. All floors in Group A to be swept, wet mopped and rinsed.
Configuration The configuration for the Purchase Right Aircraft will be the Detail Specification for Model 767-3S2F aircraft at the revision level in effect at the time of the Supplemental Agreement. Such Detail Specification will be revised to include (i) changes required to obtain required regulatory certificates and (ii) other changes as mutually agreed upon by Boeing and Customer.
Windows Windows in the Premises shall not be covered or obstructed by Lessee. No bottles, parcels or other articles shall be placed on the windowsills, in the halls, or in any other part of the Building other than the Premises. No article shall be thrown out of the doors or windows of the Premises.
Work Tenant, at its sole cost and expense, shall perform, or cause to be performed, the work (the “Work”) in the Expansion Space of the Premises provided for in the Approved Plans (as defined in Section 4 hereof). Subject to Tenant’s satisfaction of the conditions specified in this Work Letter Agreement, Tenant shall be entitled to Landlord’s Contribution (as defined in Section 9(b) below).
GLASS The Tenant shall maintain the glass part of the demised premises, promptly replacing any breakage and fully saving the Landlord harmless from any loss, cost or damage resulting from such breakage or the replacement thereof.
Roof Any Tenant-installed equipment must be removed with all roof penetrations properly repaired by a licensed roofing contractor approved by Landlord. Leaks arising from any Tenant-installed equipment or roof penetrations must be fixed in accordance with Landlord’s maintenance and repair recommendations.
ASBESTOS CONTAINING BUILDING MATERIALS Please be advised that an asbestos survey may have been performed at the Property. If provided, please review the information that identifies the locations of known asbestos containing material or presumed asbestos containing material. All personnel and appropriate subcontractors should be notified of the presence of these materials, and informed not to disturb these materials. Any activity that involves the disturbance or removal of these materials must be done by an appropriately trained individual/contractor.
Walls Sheetrock (drywall) damage should be patched and fire-taped so that there are no holes in either office or warehouse.
