CHAIN LINK FENCING Clause Samples

The CHAIN LINK FENCING clause sets out the requirements and standards for the installation of chain link fencing on a property or project site. It typically details the specifications for materials, such as the type and gauge of wire, height of the fence, and the method of installation, including posts, gates, and any necessary coatings or treatments. This clause ensures that the fencing provided meets durability, safety, and aesthetic standards, thereby preventing disputes over quality and ensuring the fence serves its intended security or boundary-marking purpose.
POPULAR SAMPLE Copied 1 times
CHAIN LINK FENCING. 6.1 The Grantor acknowledges that Genstar may be constructing chain link fencing on a portion of the side yard boundary of the Chainlink Side Yard Fence Lots to the rear of such Lots, which fencing (the "Chainlink Side Yard Fencing") may be 1.2 metres high and constructed of green vinyl chain link (the "Chainlink Specifications"). The Grantor agrees to allow the initial construction of the Chainlink Side Yard Fencing and its continued existence. Further, it shall be the responsibility of the Grantor and subsequent owners of the Chainlink Side Yard Fence Lots to properly maintain, repair, rebuild and otherwise keep the Chainlink Side Yard Fencing in good condition and if rebuilding or repair is required, to rebuild or repair in its original location and in accordance with the Chainlink Specifications. 6.2 The Grantor acknowledges that Genstar may be constructing chainlink fencing on the rear yard boundary of the Chainlink Rear Yard Fence Lots where such Lots abut a municipal reserve parcel or a private walkway, which fencing (the "Chainlink Rear Yard Fencing") may be constructed in accordance with the Chain Link Specifications. The Grantor agrees to allow the initial construction of the Chainlink Rear Yard Fencing and its continued existence. Further, it shall be the responsibility of the Grantor and subsequent owners of the Chainlink Rear Yard Fence Lots to properly maintain, repair, rebuild and otherwise keep the Chainlink Rear Yard Fencing in good condition and if rebuilding or repair is required, to rebuild or repair in its original location and in accordance with the Chainlink Specifications.
View Source
CHAIN LINK FENCING. The Contractor shall provide chain-link fencing of the entire solar-off grid Plant boundary for plant sites. Details are mention in accordance with the provision of clause 1.24 of Section 6
View Source
CHAIN LINK FENCING. 10.6.1. Chain link fencing shall be made of galvanized wire and shall conform to IS - 2721. Dia of wire and the length of side of mesh of chain link fence and the dia of line wire shall be as indicated. The wire shall be free from scale, irregularities, imperfections, flows, splits and other defects. ▇▇▇▇ coating shall be smooth even and bright. Chain link in fencing shall be fixed to fencing posts as directed by Engineer – In – Charge. 10.7. ANODISED ALUMINIUM DOORS, WINDOWS, VENTILATORS, PARTITIONS, COMPOSITE UNITS Etc.:- 10.7.1. Chemical and mechanical properties of section shall comply with requirements given in IS-733. Aluminium section and fittings shall be anodized with minimum average thickness of anodizing ie 15 micron and shall conform to IS-1868. Aluminium doors, window, ventilator, partition, composite unit etc. shall have matt scratch brush or polished finish as indicated. 10.7.2. Jointing of sections, providing fittings, lugs, method of fixing etc. shall be as per IS 1948. 10.7.3. Glass panes shall be as indicated. Unless otherwise indicated, fixing of glass pane shall be done with aluminium beading with CP, brass or stainless steel screws spaced not more than 100 mm from each corner and intermediate not more than 200 mm apart. When glass panes are fixed with aluminium beading having mitered joints, epoxy resin or silicon sealant shall be applied between glass panes and also between glass panes and beading. 10.7.4. PVC protected sheeting shall be used while fixing the frame of doors window ventilators etc. to avoid damages scratches etc.
View Source

Related to CHAIN LINK FENCING

  • Access Toll Connecting Trunk Group Architecture 9.2.1 If WCS chooses to subtend a Verizon access Tandem, WCS’s NPA/NXX must be assigned by WCS to subtend the same Verizon access Tandem that a Verizon NPA/NXX serving the same Rate Center Area subtends as identified in the LERG. 9.2.2 WCS shall establish Access Toll Connecting Trunks pursuant to applicable access Tariffs by which it will provide Switched Exchange Access Services to Interexchange Carriers to enable such Interexchange Carriers to originate and terminate traffic to and from WCS’s Customers. 9.2.3 The Access Toll Connecting Trunks shall be two-way trunks. Such trunks shall connect the End Office WCS utilizes to provide Telephone Exchange Service and Switched Exchange Access to its Customers in a given LATA to the access Tandem(s) Verizon utilizes to provide Exchange Access in such LATA. 9.2.4 Access Toll Connecting Trunks shall be used solely for the transmission and routing of Exchange Access to allow WCS’s Customers to connect to or be connected to the interexchange trunks of any Interexchange Carrier which is connected to a Verizon access Tandem.

  • Fencing The SPD shall Fence the demarcated boundary of the Demised Premises at the SPD’s own expense in every respect.

  • Parent Right to Access and Challenge Student Data The LEA shall establish reasonable procedures pursuant to which a parent, as that term is defined in 105 ILCS 10/2(g), may inspect and/or copy Student Data and/or challenge the accuracy, relevance or propriety of Student Data, pursuant to Sections 5 and 7 of ISSRA (105 ILCS 10/5; 105 ILCS 10/7) and Section 33 of SOPPA (105 ILCS 85/33). The Provider shall respond to any request by the LEA for Student Data in the possession of the Provider when Provider cooperation is required to afford a parent an opportunity to inspect and/or copy the Student Data, no later than 5 business days from the date of the request. In the event that a parent contacts the Provider directly to inspect and/or copy Student Data, the Provider shall refer the parent to the LEA, which shall follow the necessary and proper procedures regarding the requested Student Data.

  • Television Equipment Recycling Program If this Contract is for the purchase or lease of covered television equipment, then Contractor certifies that it is compliance with Subchapter Z, Chapter 361 of the Texas Health and Safety Code related to the Television Equipment Recycling Program.

  • System Logging The system must maintain an automated audit trail which can 20 identify the user or system process which initiates a request for PHI COUNTY discloses to 21 CONTRACTOR or CONTRACTOR creates, receives, maintains, or transmits on behalf of COUNTY, 22 or which alters such PHI. The audit trail must be date and time stamped, must log both successful and 23 failed accesses, must be read only, and must be restricted to authorized users. If such PHI is stored in a 24 database, database logging functionality must be enabled. Audit trail data must be archived for at least 3 25 years after occurrence.