Change in Draw Feature; Draft Conditions Sample Clauses

Open Split View

Download

Share

Cite

Change in Draw Feature; Draft Conditions. Section 3(e) of the Dealer Note is hereby amended and restated in its entirety to read as follows:

Sample 1

Save

Copy

Related to Change in Draw Feature; Draft Conditions

• Termination Conditions Such license shall not be terminated or its exploitation enjoined, until and unless: (i) Hitachi has committed a material breach of its obligations under this IP License Agreement, Opto-Device has given written notice of such breach to Hitachi and such breach remains uncured after the Cure Period, or, in the case of a breach, which cannot be cured within such Cure Period, Hitachi has not instituted within such Cure Period steps necessary to remedy the default and/or thereafter has not diligently pursued the same to completion; or (ii) such a material breach is incurable. In the event the breach is a curable breach that cannot be cured within the Cure Period but with respect to which Hitachi has instituted steps necessary to remedy the default and is thereafter diligently pursuing such cure, both parties shall negotiate to determine whether further pursuit of such cure is reasonable. If the parties cannot agree on a resolution in such negotiations, then this issue shall be referred to arbitration pursuant to the arbitration procedures set forth in Exhibit B hereto to decide whether such breach can be cured or any other alternative remedy should be adopted. In the event the breach is an incurable breach, the parties agree that the matter shall be referred to arbitration pursuant to the arbitration procedures set forth in Exhibit B hereto to determine the appropriate remedy. In the event that either party submits the dispute to arbitration, both parties shall cooperate in such binding arbitration in accordance with Exhibit B.

• Specific Conditions If applicable, specific conditions required after a risk assessment will be included in Exhibit G. Grantee shall adhere to the specific conditions listed therein.

• Market Conditions Notwithstanding any provision of this Agreement to the contrary, settlement and payment for Foreign Assets received for the account of the Portfolios and delivery of Foreign Assets maintained for the account of the Portfolios may be effected in accordance with the customary established securities trading or processing practices and procedures in the country or market in which the transaction occurs, including, without limitation, delivering Foreign Assets to the purchaser thereof or to a dealer therefor (or an agent for such purchaser or dealer) with the expectation of receiving later payment for such Foreign Assets from such purchaser or dealer. The Custodian shall provide to each Board the information with respect to custody and settlement practices in countries in which the Custodian employs a Foreign Sub-Custodian described on Schedule C hereto at the time or times set forth on such Schedule. The Custodian may revise Schedule C from time to time, provided that no such revision shall result in a Board being provided with substantively less information than had been previously provided hereunder.

• Change in Condition There occurs any event or a change in the condition or affairs, financial or otherwise, of Borrower which, in the reasonable opinion of Lender, impairs Lender's security or ability of Borrower to discharge its obligations hereunder or which impairs the rights of Lender in such Collateral.

• ADDITIONAL SPECIAL CONTRACT CONDITIONS Special Contract Conditions revisions: the corresponding subsections of the Special Contract Conditions referenced below are replaced in their entirety with the following:

• Conditions Precedent to the Initial Extension of Credit The obligation of each Lender to make the initial extensions of credit provided for hereunder is subject to the fulfillment, to the satisfaction of Agent and each Lender, of each of the conditions precedent set forth on Schedule 3.1 to this Agreement (the making of such initial extensions of credit by a Lender being conclusively deemed to be its satisfaction or waiver of the conditions precedent).

• Unbundled Loop Modifications (Line Conditioning 2.5.1 Line Conditioning is defined as routine network modification that BellSouth regularly undertakes to provide xDSL services to its own customers. This may include the removal of any device, from a copper Loop or copper Subloop that may diminish the capability of the Loop or Subloop to deliver high-speed switched wireline telecommunications capability, including xDSL service. Such devices include, load coils, excessive bridged taps, low pass filters, and range extenders. Excessive bridged taps are bridged taps that serves no network design purpose and that are beyond the limits set according to industry standards and/or the BellSouth’s TR 73600 Unbundled Local Loop Technical Specification. 2.5.2 BellSouth will remove load coils only on copper Loops and Subloops that are less than eighteen thousand (18,000) feet in length. 2.5.3 For any copper loop being ordered by NewPhone which has over six thousand (6,000) feet of combined bridged tap will be modified, upon request from NewPhone, so that the loop will have a maximum of six thousand (6,000) feet of bridged tap. This modification will be performed at no additional charge to NewPhone. Loop conditioning orders that require the removal of bridged tap that serves no network design purpose on a copper Loop that will result in a combined total of bridged tap between two thousand five hundred (2,500) and six thousand (6,000) feet will be performed at the rates set forth in Exhibit A. 2.5.4 NewPhone may request removal of any unnecessary and non-excessive bridged tap (bridged tap between zero (0) and two thousand five hundred (2,500) feet which serves no network design purpose), at rates pursuant to BellSouth’s SC Process as mutually agreed to by the Parties. 2.5.5 Rates for ULM are as set forth in Exhibit A. 2.5.6 BellSouth will not modify a Loop in such a way that it no longer meets the technical parameters of the original Loop type (e.g., voice grade, ADSL, etc.) being ordered. 2.5.7 If NewPhone requests ULM on a reserved facility for a new Loop order, BellSouth may perform a pair change and provision a different Loop facility in lieu of the reserved facility with ULM if feasible. The Loop provisioned will meet or exceed specifications of the requested Loop facility as modified. NewPhone will not be charged for ULM if a different Loop is provisioned. For Loops that require a DLR or its equivalent, BellSouth will provide LMU detail of the Loop provisioned. 2.5.8 NewPhone shall request Loop make up information pursuant to this Attachment prior to submitting a service inquiry and/or a LSR for the Loop type that NewPhone desires BellSouth to condition. 2.5.9 When requesting ULM for a Loop that BellSouth has previously provisioned for NewPhone, NewPhone will submit a SI to BellSouth. If a spare Loop facility that meets the Loop modification specifications requested by NewPhone is available at the location for which the ULM was requested, NewPhone will have the option to change the Loop facility to the qualifying spare facility rather than to provide ULM. In the event that BellSouth changes the Loop facility in lieu of providing ULM, NewPhone will not be charged for ULM but will only be charged the service order charges for submitting an order.

• Notice of Issuance, Amendment, Renewal, Extension; Certain Conditions Each issuance, amendment, renewal or extension of a Letter of Credit shall be subject to the conditions set forth in Section 6.02. To request the issuance of a Letter of Credit (or the amendment, renewal or extension of an outstanding Letter of Credit), the Borrower shall hand deliver or fax (or transmit by electronic communication, if arrangements for doing so have been approved by the relevant Issuing Bank) to any Issuing Bank and the Administrative Agent (not less than three (3) Business Days in advance of the requested date of issuance, amendment, renewal or extension) a notice: (i) requesting the issuance of a Letter of Credit or identifying the Letter of Credit issued by such Issuing Bank to be amended, renewed or extended; (ii) specifying the date of issuance, amendment, renewal or extension (which shall be a Business Day); (iii) specifying the date on which such Letter of Credit is to expire (which shall comply with Section 2.08(c)); (iv) specifying the amount of such Letter of Credit; (v) specifying the name and address of the beneficiary thereof and such other information as shall be necessary to prepare, amend, renew or extend such Letter of Credit; (vi) specifying the amount of the then effective Borrowing Base and whether a Borrowing Base Deficiency exists at such time, the current total Revolving Credit Exposures (without regard to the requested Letter of Credit or the requested amendment, renewal or extension of an outstanding Letter of Credit) and the pro forma total Revolving Credit Exposures (giving effect to the requested Letter of Credit or the requested amendment, renewal or extension of an outstanding Letter of Credit); and (vii) confirming the conditions set for in Section 6.02 have been satisfied. A Letter of Credit shall be issued, amended, renewed or extended only if (and each notice shall constitute a representation and warranty by the Borrower that) after giving effect to the requested issuance, amendment, renewal or extension, as applicable, (i) the LC Exposure shall not exceed the LC Commitment and (ii) the total Revolving Credit Exposures shall not exceed the total Commitments. If requested by any Issuing Bank, the Borrower also shall submit a letter of credit application on such Issuing Bank’s standard form in connection with any request for a Letter of Credit; provided that, in the event of any conflict between such application and the terms of this Agreement, the terms of this Agreement shall control.

• Payment Conditions The price of the whole accommodation service booked is always payable by the Guest in advance, at the latest upon arrival in the hotel. Set-off by the Guest is excluded unless the set- off relates to an undisputed or legally confirmed claim. Valid means of payment are cash in Euros, EC card, Master Card, Visa Card, Diners Card and American Express. For payment settlement we use the 3D Secure 2.0 system for secure and additional customer authorisation. For further information on data processing for payment transactions see xxxxx://xxx.xxxxx-xxx.xxx/en/data-privacy/.

• Extension of Facility Termination Date The Seller may advise any Managing Agent in writing of its desire to extend the Facility Termination Date for an additional period not exceeding 364 days, provided such request is made not more than 90 days prior to, and not less than 60 days prior to, the then current Facility Termination Date. Each Managing Agent so advised by the Seller shall promptly notify each Committed Purchaser in its related Purchaser Group of any such request and each such Committed Purchaser shall notify its related Managing Agent, the Collateral Agent and the Seller of its decision to accept or decline the request for such extension no later than 30 days prior to the then current Facility Termination Date (it being understood that each Committed Purchaser may accept or decline such request in its sole discretion and on such terms as it may elect, and the failure to so notify its Managing Agent, the Collateral Agent and the Seller shall be deemed an election not to extend by such Committed Purchaser). In the event that at least one Committed Purchaser agrees to extend the Facility Termination Date, the Seller Parties, the Collateral Agent, the extending Committed Purchasers and the applicable Managing Agent or Managing Agents shall enter into such documents as such extending Committed Purchasers may deem necessary or appropriate to reflect such extension, and all reasonable costs and expenses incurred by such Committed Purchasers, the Managing Agents and the Collateral Agent (including reasonable attorneys’ fees) shall be paid by the Seller. In the event that any Committed Purchaser (a) declines the request to extend the Facility Termination Date or (b) is in a Purchaser Group with respect to which the Seller did not seek an extension of the Facility Termination Date (each such Committed Purchaser being referred to herein as a “Non-Renewing Committed Purchaser”), and, in the case of a Non-Renewing Committed Purchaser described in clause (a), the Commitment of such Non-Renewing Committed Purchaser is not assigned to another Person in accordance with the terms of this Article XI prior to the then current Facility Termination Date, the Purchase Limit shall be reduced by an amount equal to each such Non-Renewing Committed Purchaser’s Commitment on the then current Facility Termination Date.