Provisions Related to Extended Revolving Credit Commitments If the maturity date shall have occurred in respect of any tranche of Revolving Credit Commitments at a time when another tranche or tranches of Revolving Credit Commitments is or are in effect with a longer maturity date, then on the earliest occurring maturity date all then outstanding Swing Line Loans shall be repaid in full on such date (and there shall be no adjustment to the participations in such Swing Line Loans as a result of the occurrence of such maturity date); provided, however, that if on the occurrence of such earliest maturity date (after giving effect to any repayments of Revolving Credit Loans and any reallocation of Letter of Credit participations as contemplated in Section 2.03(l)), there shall exist sufficient unutilized Extended Revolving Credit Commitments so that the respective outstanding Swing Line Loans could be incurred pursuant the Extended Revolving Credit Commitments which will remain in effect after the occurrence of such maturity date, then there shall be an automatic adjustment on such date of the participations in such Swing Line Loans and the same shall be deemed to have been incurred solely pursuant to the relevant Extended Revolving Credit Commitments, and such Swing Line Loans shall not be so required to be repaid in full on such earliest maturity date.
Termination, Reduction and Increase of Commitments (a) Unless previously terminated, (i) the Term Loan Commitments shall terminate at 5:00 p.m., Houston, Texas time, on the Effective Date and (ii) the Revolving Commitments shall terminate on the Revolving Maturity Date. (b) The Borrower may at any time terminate, or from time to time reduce, the Commitments of any Class; provided that (i) each reduction of the Commitments of any Class shall be in an amount that is an integral multiple of $1,000,000 and (ii) the Borrower shall not terminate or reduce the Revolving Commitments if, after giving effect to any concurrent prepayment of the Revolving Loans in accordance with Section 2.10, the sum of the Revolving Exposures would exceed the total Revolving Commitments. (c) The Borrower shall notify the Administrative Agent of any election to terminate or reduce the Commitments under paragraph (b) of this Section, at least three Business Days prior to the effective date of such termination or reduction, specifying such election and the effective date thereof. Promptly following receipt of any notice, the Administrative Agent shall advise the Lenders of the contents thereof. Each notice delivered by the Borrower pursuant to this Section shall be irrevocable; provided that a notice of termination of the Commitments delivered by the Borrower may state that such notice is conditioned upon the effectiveness of other credit facilities, in which case such notice may be revoked by the Borrower (by notice to the Administrative Agent on or prior to the specified effective date) if such condition is not satisfied. Any termination or reduction of the Commitments of any Class shall be permanent. Each reduction of the Commitments of any Class shall be made ratably among the Lenders in accordance with their respective Commitments of such Class. (d) At any time prior to the expiration of the Revolving Availability Period, and so long as no Event of Default shall have occurred which is continuing, the Borrower may elect to increase the aggregate of the Revolving Commitments to an amount not exceeding the Maximum Accordion Amount minus any reductions in the Revolving Commitments pursuant to Section2.07(b) hereof, provided that (i) no Lender shall be required to increase its Revolving Commitment unless it shall have expressly agreed to such increase in writing (but otherwise, no notice to or consent by any Lender shall be required, notwithstanding anything to the contrary set forth in Section 9.02 hereof), (ii) the addition of new Lenders shall be subject to the terms and provisions of Section 9.04 hereof as if such new Lenders were acquiring an interest in the Loans by assignment from an existing Lenders (to the extent applicable, i.e. required approvals, minimum amounts and the like), (iii) the Borrower shall execute and deliver such additional or replacement Notes and such other documentation (including evidence of proper authorization) as may be reasonably requested by the Administrative Agent, any new Lender or any Lender which is increasing its Revolving Commitment, (iv) no Lender shall have any right to decrease its Revolving Commitment as a result of such increase of the aggregate amount of the Revolving Commitments, (v) the Administrative Agent shall have no obligation to arrange, find or locate any Lender or new bank or financial institution to participate in any unsubscribed portion of such increase in the aggregate committed amount of the Revolving Commitments, and (vi) such option to increase the Revolving Commitments may only be exercised once. The Borrower shall be required to pay (or to reimburse each applicable Lender for) any breakage costs incurred by any Lender in connection with the need to reallocate existing Loans among the Lenders following any increase in the Revolving Commitments pursuant to this provision. Except as may otherwise be agreed by the Borrower and any applicable Lender, the Borrower shall not be required to pay any upfront or other fees or expenses to any existing Lenders, new Lenders or the Administrative Agent with respect to any such increase in Revolving Commitments.
Termination of Commitment On the service of a notice under paragraph (a) of Clause 18.2, the Commitment and all other obligations of the Lender to the Borrower under this Agreement shall terminate.
Termination of Commitment to Lend Notwithstanding anything in the Loan Documents, Lender’s obligation to lend the undisbursed portion of the Commitment Amount to Borrower hereunder shall terminate on the earlier of (i) at Lender’s sole election, the occurrence of any Default or Event of Default hereunder, and (ii) the applicable Commitment Termination Date. Notwithstanding the foregoing, Lender’s obligation to lend the undisbursed portion of the Commitment Amount to Borrower shall terminate if, in Lender’s sole judgment, there has been a material adverse change in the general affairs, management, results of operations, condition (financial or otherwise) or prospects of Borrower, whether or not arising from transactions in the ordinary course of business, or there has been any material adverse deviation by Borrower from the business plan of Borrower presented to Lender on or before the date of this Agreement.
Termination and Reduction of Revolving Commitments (a) Unless previously terminated, the Revolving Commitments shall terminate on the Maturity Date. (b) The Borrower may at any time terminate, or from time to time reduce, the Revolving Commitments; provided that (i) each partial reduction of the Revolving Commitments shall be in an amount that is an integral multiple of $1,000,000 and not less than $5,000,000 and (ii) the Borrower shall not terminate or reduce the Revolving Commitments if, after giving effect to any concurrent prepayment of the Loans in accordance with Section 2.08, the sum of the Aggregate Total Exposure would exceed the total Commitments. (c) The Borrower shall notify the Administrative Agent of any election to terminate or reduce the Revolving Commitments under paragraph (b) of this Section at least three Business Days prior to the effective date of such termination or reduction, specifying such election and the effective date thereof. Promptly following receipt of any notice, the Administrative Agent shall advise the Lenders of the contents thereof. Each notice delivered by the Borrower pursuant to this Section shall be irrevocable; provided that a notice of termination of the Revolving Commitments delivered by the Borrower may state that such notice is conditioned upon the effectiveness of other credit facilities or another transaction, in which case such notice may be revoked by the Borrower (by notice to the Administrative Agent on or prior to the specified effective date) if such condition is not satisfied. Any termination or reduction of the Revolving Commitments shall be permanent. Each reduction of the Revolving Commitments shall be applied to the Lenders in accordance with their respective Applicable Percentages. (d) If, after giving effect to any reduction of the Revolving Commitments, the Letter of Credit Sublimit exceeds the amount of the Revolving Commitments, such Letter of Credit Sublimit shall be automatically reduced by the amount of such excess.
Mandatory Termination of Commitments The Commitments shall terminate on the Termination Date and any Loans then outstanding (together with accrued interest thereon) shall be due and payable on such date.
Replacement of the L/C Issuer The L/C Issuer may be replaced at any time by written agreement between the Borrower, the Administrative Agent, the replaced L/C Issuer and the successor L/C Issuer. The Administrative Agent shall notify the Lenders of any such replacement of the L/C Issuer. At the time any such replacement shall become effective, the Borrower shall pay all unpaid fees accrued for the account of the replaced L/C Issuer pursuant to Section 2.03(m). From and after the effective date of any such replacement, (i) the successor L/C Issuer shall have all the rights and obligations of an L/C Issuer under this Agreement with respect to Letters of Credit to be issued by it thereafter and (ii) references herein to the term “L/C Issuer” shall be deemed to include such successor or any previous L/C Issuer, or such successor and all previous L/C Issuer, as the context shall require. After the replacement of the L/C Issuer hereunder, the replaced L/C Issuer shall remain a party hereto and shall continue to have all the rights and obligations of an L/C Issuer under this Agreement with respect to Letters of Credit issued by it prior to such replacement, but shall not be required to issue additional Letters of Credit.
Unbundled Loop Modifications (Line Conditioning 2.5.1 Line Conditioning is defined as routine network modification that BellSouth regularly undertakes to provide xDSL services to its own customers. This may include the removal of any device, from a copper Loop or copper Subloop that may diminish the capability of the Loop or Subloop to deliver high-speed switched wireline telecommunications capability, including xDSL service. Such devices include, load coils, excessive bridged taps, low pass filters, and range extenders. Excessive bridged taps are bridged taps that serves no network design purpose and that are beyond the limits set according to industry standards and/or the BellSouth’s TR 73600 Unbundled Local Loop Technical Specification. 2.5.2 BellSouth will remove load coils only on copper Loops and Subloops that are less than eighteen thousand (18,000) feet in length. 2.5.3 For any copper loop being ordered by NewPhone which has over six thousand (6,000) feet of combined bridged tap will be modified, upon request from NewPhone, so that the loop will have a maximum of six thousand (6,000) feet of bridged tap. This modification will be performed at no additional charge to NewPhone. Loop conditioning orders that require the removal of bridged tap that serves no network design purpose on a copper Loop that will result in a combined total of bridged tap between two thousand five hundred (2,500) and six thousand (6,000) feet will be performed at the rates set forth in Exhibit A. 2.5.4 NewPhone may request removal of any unnecessary and non-excessive bridged tap (bridged tap between zero (0) and two thousand five hundred (2,500) feet which serves no network design purpose), at rates pursuant to BellSouth’s SC Process as mutually agreed to by the Parties. 2.5.5 Rates for ULM are as set forth in Exhibit A. 2.5.6 BellSouth will not modify a Loop in such a way that it no longer meets the technical parameters of the original Loop type (e.g., voice grade, ADSL, etc.) being ordered. 2.5.7 If NewPhone requests ULM on a reserved facility for a new Loop order, BellSouth may perform a pair change and provision a different Loop facility in lieu of the reserved facility with ULM if feasible. The Loop provisioned will meet or exceed specifications of the requested Loop facility as modified. NewPhone will not be charged for ULM if a different Loop is provisioned. For Loops that require a DLR or its equivalent, BellSouth will provide LMU detail of the Loop provisioned. 2.5.8 NewPhone shall request Loop make up information pursuant to this Attachment prior to submitting a service inquiry and/or a LSR for the Loop type that NewPhone desires BellSouth to condition. 2.5.9 When requesting ULM for a Loop that BellSouth has previously provisioned for NewPhone, NewPhone will submit a SI to BellSouth. If a spare Loop facility that meets the Loop modification specifications requested by NewPhone is available at the location for which the ULM was requested, NewPhone will have the option to change the Loop facility to the qualifying spare facility rather than to provide ULM. In the event that BellSouth changes the Loop facility in lieu of providing ULM, NewPhone will not be charged for ULM but will only be charged the service order charges for submitting an order.
Limitation of responsibility of Existing Lenders (a) Unless expressly agreed to the contrary, an Existing Lender makes no representation or warranty and assumes no responsibility to a New Lender for: (i) the legality, validity, effectiveness, adequacy or enforceability of the Finance Documents or any other documents; (ii) the financial condition of any Obligor; (iii) the performance and observance by any Obligor of its obligations under the Finance Documents or any other documents; or (iv) the accuracy of any statements (whether written or oral) made in or in connection with any Finance Document or any other document, and any representations or warranties implied by law are excluded. (b) Each New Lender confirms to the Existing Lender and the other Finance Parties that it: (i) has made (and shall continue to make) its own independent investigation and assessment of the financial condition and affairs of each Obligor and its related entities in connection with its participation in this Agreement and has not relied exclusively on any information provided to it by the Existing Lender in connection with any Finance Document; and (ii) will continue to make its own independent appraisal of the creditworthiness of each Obligor and its related entities whilst any amount is or may be outstanding under the Finance Documents or any Commitment is in force. (c) Nothing in any Finance Document obliges an Existing Lender to: (i) accept a re-transfer from a New Lender of any of the rights and obligations assigned or transferred under this Clause 24; or (ii) support any losses directly or indirectly incurred by the New Lender by reason of the non-performance by any Obligor of its obligations under the Finance Documents or otherwise.
Termination of Commitments Declare the Commitments terminated whereupon the Commitments shall be immediately terminated.