Common use of Condition of Property Clause in Contracts

Condition of Property. The Mortgage Loan Seller or the originator of the Mortgage Loan inspected or caused to be inspected each related Mortgaged Property within six months of origination of the Mortgage Loan and within twelve months of the Cut-off Date. An engineering report or property condition assessment was prepared by a third party engineering consultant in connection with the origination of each Mortgage Loan no more than twelve months prior to the Cut-off Date. To the Mortgage Loan Seller’s knowledge, based solely upon the due diligence customarily performed by the Mortgage Loan Seller in connection with the origination of similar commercial and multifamily loans intended for securitization, and except as set forth in such engineering report or property condition report or with respect to which repairs were required to be reserved for or made, (a) all major building systems for the improvements of each related Mortgaged Property are in good working order, and (b) each related Mortgaged Property (i) is free of any material damage, and (ii) is in good repair and condition, and (iii) is free of patent and observable structural defects, except, as to all statements in clauses (a) and (b) above, to the extent: (x) any damage or deficiencies would not reasonably be expected to materially and adversely affect the use or operation of the Mortgaged Property or the security intended to be provided by such Mortgage, or repairs with respect to such damage or deficiencies are estimated to not exceed 5% of the original principal balance of the Mortgage Loan; (y) such repairs have been completed; or (z) escrows in an aggregate amount consistent with the standards utilized by the Mortgage Loan Seller in connection with the origination of similar commercial and multifamily loans intended for securitization, which escrows will in all events be in an aggregate amount not less than the estimated cost of such repairs. To the Mortgage Loan Seller’s knowledge, based on the engineering report or property condition assessment and the Sponsor Diligence (as defined in paragraph 42), there are no issues with the physical condition of the Mortgaged Property that the Mortgage Loan Seller believes would have a material adverse effect on the current marketability or principal use of the Mortgaged Property other than those disclosed in the engineering report or Servicing File and those addressed in sub-clauses (x), (y), and (z) of the preceding sentence.

Condition of Property. The Mortgage Loan Seller or the originator of the Mortgage Loan inspected or caused to be inspected each related Mortgaged Property within six months of origination of the Mortgage Loan and within twelve months of the Cut-off Date. An engineering report or property condition assessment was prepared by a third party engineering consultant in connection with the origination of each Mortgage Loan no more than twelve months prior to the Cut-off Date. To the Mortgage Loan Seller’s knowledge, based solely upon the due diligence customarily performed by the Mortgage Loan Seller in connection with the origination of similar commercial and multifamily loans intended for securitization, and except as set forth in such engineering report or property condition report or with respect to which repairs were required to be reserved for or made, (a) all major building systems for the improvements of each related Mortgaged Property are in good working order, and (b) each related Mortgaged Property (i) is free of any material damage, and (ii) is in good repair and condition, and (iii) is free of patent and observable structural defects, except, except to the extent as to all statements in clauses (a) and (b) above, to the extent: ) (x) any damage or deficiencies would not reasonably be expected to materially and adversely affect the use or operation of the Mortgaged Property or the security intended to be provided by such Mortgage, or repairs with respect to such damage or deficiencies are estimated to not exceed 5% of the original principal balance of the Mortgage Loan, the amount necessary to effect the necessary; (y) such repairs have been completed; or (z) escrows in an aggregate amount consistent with the standards utilized by the Mortgage Loan Seller in connection with the origination of similar commercial and multifamily loans intended for securitization, which escrows will in all events be in an aggregate amount not less than the estimated cost of such repairs. To the Mortgage Loan Seller’s knowledge, based on the engineering report or property condition assessment and the Sponsor Diligence (as defined in paragraph 42), there are no issues with the physical condition of the Mortgaged Property that the Mortgage Loan Seller believes would have a material adverse effect on the current marketability or principal use of the Mortgaged Property other than those disclosed in the engineering report or Servicing File and those addressed in sub-clauses (x), (y), and (z) of the preceding sentence.

Condition of Property. The Mortgage Loan Seller or the originator of the Mortgage Loan inspected or caused to be inspected each related Mortgaged Property within six months of origination of the Mortgage Loan and within twelve months of the Cut-off Date. An engineering report or property condition assessment was prepared by a third party engineering consultant in connection with the origination of each Mortgage Loan no more than twelve months prior to the Cut-off Date. To the Mortgage Loan Seller’s knowledge, based solely upon the due diligence customarily performed by the Mortgage Loan Seller in connection with the origination of similar commercial and multifamily loans intended for securitization, and except as set forth in such engineering report or property condition report or with respect to which repairs were required to be reserved for or made, (a) all major building systems for the improvements of each related Mortgaged Property are in good working order, and (b) each related Mortgaged Property (i) is free of any material damage, and (ii) is in good repair and condition, and (iii) is free of patent and observable structural defects, except, as to all statements in clauses (a) and (b) above, to the extent: (x) any damage or deficiencies would not reasonably be expected to materially and adversely affect the use or operation of the Mortgaged Property or the security intended to be provided by such Mortgage, or repairs with respect to such damage or deficiencies are estimated to not exceed 5% of the original principal balance of the Mortgage Loan, the amount necessary to effect the necessary; (y) such repairs have been completed; or (z) escrows in an aggregate amount consistent with the standards utilized by the Mortgage Loan Seller in connection with the origination of similar commercial and multifamily loans intended for securitization, which escrows will in all events be in an aggregate amount not less than the estimated cost of such repairs. To the Mortgage Loan Seller’s knowledge, based on the engineering report or property condition assessment and the Sponsor Diligence (as defined in paragraph 42), there are no issues with the physical condition of the Mortgaged Property that the Mortgage Loan Seller believes would have a material adverse effect on the current marketability or principal use of the Mortgaged Property other than those disclosed in the engineering report or Servicing File and those addressed in sub-clauses (x), (y), and (z) of the preceding sentence.

Condition of Property. The Mortgage Loan Seller or the originator of the Mortgage Loan inspected or caused to be inspected each related Mortgaged Property within six months of origination of the Mortgage Loan and within twelve months of the Cut-off Date. An engineering report or property condition assessment was prepared by a third party engineering consultant in connection with the origination of each Mortgage Loan no more than twelve months prior to the Cut-off Date. To the Mortgage Loan Seller’s knowledge, based solely upon the due diligence customarily performed by the Mortgage Loan Seller in connection with the origination of similar commercial and multifamily loans intended for securitization, and except as set forth in such engineering report or property condition report or with respect to which repairs were required to be reserved for or made, (a) all major building systems for the improvements of each related Mortgaged Property are in good working order, and (b) each related Mortgaged Property (i) is free of any material damage, and (ii) is in good repair and condition, and (iii) is free of patent and observable structural defects, except, as to all statements in clauses (a) and (b) above, to the extent: (x) any damage or deficiencies would not reasonably be expected to materially and adversely affect the use or operation of the Mortgaged Property or the security intended to be provided by such Mortgage, or repairs with respect to such damage or deficiencies are estimated to not exceed 5% of the original principal balance of the Mortgage Loan; (y) such repairs have been completed; or (z) escrows in an aggregate amount consistent with the standards utilized by the Mortgage Loan Seller in connection with the origination of similar commercial and multifamily loans intended for securitization, which escrows will in all events be in an aggregate amount not less than the estimated cost of such repairs. To the Mortgage Loan Seller’s knowledge, based on the engineering report or property condition assessment and the Sponsor Diligence (as defined in paragraph 42), there are no issues with the physical condition of the Mortgaged Property that the Mortgage Loan Seller believes would have a material adverse effect on the current marketability or principal use of the Mortgaged Property other than those disclosed in the engineering report or Servicing File and those addressed in sub-clauses (x), (y), and (z) of the preceding sentence.

Condition of Property. The Mortgage Loan Seller or the originator of the Mortgage Loan inspected or caused to be inspected each related Mortgaged Property within six months of origination of the Mortgage Loan and within twelve months of the Cut-off Date. An engineering report or property condition assessment was prepared by a third party engineering consultant in connection with the origination of each Mortgage Loan no more than twelve months prior to the Cut-off Date. To the Mortgage Loan Seller’s knowledge, based solely upon the due diligence customarily performed by the Mortgage Loan Seller in connection with the origination of similar commercial and multifamily loans intended for securitization, and except as set forth in such engineering report or property condition report or with respect to which repairs were required to be reserved for or made, (a) all major building systems for the improvements of each related Mortgaged Property are in good working order, and (b) each related Mortgaged Property (i) is free of any material damage, and (ii) is in good repair and condition, and (iii) is free of patent and observable structural defects, exceptexcept to the extent, as to all statements in clauses (a) and (b) above, to the extent: (x) any damage or deficiencies would not reasonably be expected to materially and adversely affect the use or operation of the Mortgaged Property or the security intended to be provided by such Mortgage, or repairs with respect to such damage or deficiencies are estimated to not exceed 5% of the original principal balance of the Mortgage Loan; (y) such repairs have been completed; or (z) escrows in an aggregate amount consistent with the standards utilized by the Mortgage Loan Seller in connection with the origination of similar commercial and multifamily loans intended for securitization, which escrows will in all events be in an aggregate amount not less than the estimated cost of such repairs. To the Mortgage Loan Seller’s knowledge, based on the engineering report or property condition assessment and the Sponsor Diligence (as defined in paragraph 42), there are no issues with the physical condition of the Mortgaged Property that the Mortgage Loan Seller believes would have a material adverse effect on the current marketability or principal use of the Mortgaged Property other than those disclosed in the engineering report or Servicing File and those addressed in sub-clauses (x), (y), and (z) of the preceding sentence.

Condition of Property. The Mortgage Loan Seller or the originator of the Mortgage Loan inspected or caused to be inspected each related Mortgaged Property within six months of origination of the Mortgage Loan and within twelve months of the Cut-off Off Date. An engineering report or property condition assessment was prepared by a third party engineering consultant in connection with the origination of each Mortgage Loan no more than twelve months prior to the Cut-off Off Date. To the Mortgage Loan Seller’s knowledge, based solely upon the due diligence customarily performed by the Mortgage Loan Seller in connection with the origination of similar commercial and multifamily loans intended for securitization, and except as set forth in such engineering report or property condition report or with respect to which repairs were required to be reserved for or made, (a) all major building systems for the improvements of each related Mortgaged Property are in good working order, and (b) each related Mortgaged Property (i) is free of any material damage, and (ii) is in good repair and condition, and (iii) is free of patent and observable structural defects, except, except to the extent as to all statements in clauses (a) and (b) above, to the extent: ) (x) any damage or deficiencies would not reasonably be expected to materially and adversely affect the use or operation of the Mortgaged Property or the security intended to be provided by such Mortgage, or repairs with respect to such damage or deficiencies are estimated to not exceed 5% of the original principal balance of the Mortgage Loan, the amount necessary to effect the necessary; (y) such repairs have been completed; or (z) escrows in an aggregate amount consistent with the standards utilized by the Mortgage Loan Seller in connection with the origination of similar commercial and multifamily loans intended for securitization, which escrows will in all events be in an aggregate amount not less than the estimated cost of such repairs. To the Mortgage Loan Seller’s knowledge, based on the engineering report or property condition assessment and the Sponsor Diligence (as defined in paragraph 42), there are no issues with the physical condition of the Mortgaged Property that the Mortgage Loan Seller believes would have a material adverse effect on the current marketability or principal use of the Mortgaged Property other than those disclosed in the engineering report or Servicing File and those addressed in sub-clauses (x), (y), and (z) of the preceding sentence.

Condition of Property. The Mortgage Loan Seller or the originator of the Mortgage Loan inspected or caused to be inspected each related Mortgaged Property within six months of origination of the Mortgage Loan and within twelve months of the Cut-off Date. An engineering report or property condition assessment was prepared by a third party engineering consultant in connection with the origination of each Mortgage Loan no more than twelve months prior to the Cut-off Date. To the Mortgage Loan Seller’s knowledge, based solely upon the due diligence customarily performed by the Mortgage Loan Seller in connection with the origination of similar commercial and multifamily loans intended for securitization, and except as set forth in such engineering report or property condition report or with respect to which repairs were required to be reserved for or made, (a) all major building systems for the improvements of each related Mortgaged Property are in good working order, and (b) each related Mortgaged Property (i) is free of any material damage, and (ii) is in good repair and condition, and (iii) is free of patent and observable structural defects, exceptexcept to the extent, as to all statements in clauses (a) and (b) above, to the extent: (x) any damage or deficiencies would not reasonably be expected to materially and adversely affect the use or operation of the Mortgaged Property or the security intended to be provided by such Mortgage, or repairs with respect to such damage or deficiencies are estimated to not exceed 5% of the original principal balance of the Mortgage Loan, the amount necessary to effect the necessary; (y) such repairs have been completed; or (z) escrows in an aggregate amount consistent with the standards utilized by the Mortgage Loan Seller in connection with the origination of similar commercial and multifamily loans intended for securitization, which escrows will in all events be in an aggregate amount not less than the estimated cost of such repairs. To the Mortgage Loan Seller’s knowledge, based on the engineering report or property condition assessment and the Sponsor Diligence (as defined in paragraph 42), there are no issues with the physical condition of the Mortgaged Property that the Mortgage Loan Seller believes would have a material adverse effect on the current marketability or principal use of the Mortgaged Property other than those disclosed in the engineering report or Servicing File and those addressed in sub-clauses (x), (y), and (z) of the preceding sentence.

Condition of Property. The Mortgage Loan Seller or the originator of the Mortgage Loan inspected or caused to be inspected each related Mortgaged Property within six months of origination of the Mortgage Loan and within twelve months of the Cut-off Date. An engineering report or property condition assessment was prepared by a third party engineering consultant in connection with the origination of each Mortgage Loan no more than twelve months prior to the Cut-off Date. To the Mortgage Loan Seller’s knowledge, based solely upon the due diligence customarily performed by the Mortgage Loan Seller in connection with the origination of similar commercial and multifamily loans intended for securitization, and except as set forth in such engineering report or property condition report or with respect to which repairs were required to be reserved for or made, (a) all major building systems for the improvements of each related Mortgaged Property are in good working order, and (b) each related Mortgaged Property (i) is free of any material damage, and (ii) is in good repair and condition, and (iii) is free of patent and observable structural defects, except, except to the extent as to all statements in clauses (a) and (b) above, to the extent: (x) any damage or deficiencies would not reasonably be expected to materially and adversely affect the use or operation of the Mortgaged Property or the security intended to be provided by such Mortgage, or repairs with respect to such damage or deficiencies are estimated to not exceed 5% of the original principal balance of the Mortgage Loan, the amount necessary to effect the necessary; (y) such repairs have been completed; or (z) escrows in an aggregate amount consistent with the standards utilized by the Mortgage Loan Seller in connection with the origination of similar commercial and multifamily loans intended for securitization, which escrows will in all events be in an aggregate amount not less than the estimated cost of such repairs. To the Mortgage Loan Seller’s knowledge, based on the engineering report or property condition assessment and the Sponsor Diligence (as defined in paragraph 42), there are no issues with the physical condition of the Mortgaged Property that the Mortgage Loan Seller believes would have a material adverse effect on the current marketability or principal use of the Mortgaged Property other than those disclosed in the engineering report or Servicing File and those addressed in sub-clauses (x), (y), and (z) of the preceding sentence.

Condition of Property. The Mortgage Loan Seller or the originator of the Mortgage Loan inspected or caused to be inspected each related Mortgaged Property within six months of origination of the Mortgage Loan and within twelve months of the Cut-off Date. An engineering report or property condition assessment was prepared by a third party engineering consultant in connection with the origination of each Mortgage Loan no more than twelve months prior to the Cut-off Date. To the Mortgage Loan Seller’s knowledge, based solely upon the due diligence customarily performed by the Mortgage Loan Seller in connection with the origination of similar commercial and multifamily loans intended for securitization, and except as set forth in such engineering report or property condition report or with respect to which repairs were required to be reserved for or made, (a) all major building systems for the improvements of each related Mortgaged Property are in good working order, and (b) each related Mortgaged Property (i) is free of any material damage, and (ii) is in good repair and condition, and (iii) is free of patent and observable structural defects, exceptexcept to the extent, as to all statements in clauses (a) and (b) above, to the extent: ; (x) any damage or deficiencies would not reasonably be expected to materially and adversely affect the use or operation of the Mortgaged Property or the security intended to be provided by such Mortgage, or repairs with respect to such damage or deficiencies are estimated to not exceed 5% of the original principal balance of the Mortgage Loan; (y) such repairs have been completed; or (z) escrows in an aggregate amount consistent with the standards utilized by the Mortgage Loan Seller in connection with the origination of similar commercial and multifamily loans intended for securitization, which escrows will in all events be in an aggregate amount not less than the estimated cost of such repairs. To the Mortgage Loan Seller’s knowledge, based on the engineering report or property condition assessment and the Sponsor Diligence (as defined in paragraph 42), there are no issues with the physical condition of the Mortgaged Property that the Mortgage Loan Seller believes would have a material adverse effect on the current marketability or principal use of the Mortgaged Property other than those disclosed in the engineering report or Servicing File and those addressed in sub-clauses (x), (y), and (z) of the preceding sentence.

Condition of Property. The Mortgage Loan Seller or the originator of the Mortgage Loan inspected or caused to be inspected each related Mortgaged Property within six months of origination of the Mortgage Loan and within twelve months of the Cut-off Date. An engineering report or property condition assessment was prepared by a third party engineering consultant in connection with the origination of each Mortgage Loan no more than twelve months prior to the Cut-off Date. To the Mortgage Loan Seller’s knowledge, based solely upon the due diligence customarily performed by the Mortgage Loan Seller in connection with the origination of similar commercial and multifamily loans intended for securitization, and except as set forth in such engineering report or property condition report or with respect to which repairs were required to be reserved for or made, (a) all major building systems for the improvements of each related Mortgaged Property are in good working order, and (b) each related Mortgaged Property (i) is free of any material damage, and (ii) is in good repair and condition, and (iii) is free of patent and observable structural defects, except, as to all statements in clauses (a) and (b) above, to the extent: extent (x) any damage or deficiencies would not reasonably be expected to materially and adversely affect the use or operation of the Mortgaged Property or the security intended to be provided by such Mortgage, or repairs with respect to such damage or deficiencies are estimated to not exceed 5% of the original principal balance of the Mortgage Loan, the amount necessary to effect the necessary; (y) such repairs have been completed; or (z) escrows in an aggregate amount consistent with the standards utilized by the Mortgage Loan Seller in connection with the origination of similar commercial and multifamily loans intended for securitization, which escrows will in all events be in an aggregate amount not less than the estimated cost of such repairs. To the Mortgage Loan Seller’s knowledge, based on the engineering report or property condition assessment and the Sponsor Diligence (as defined in paragraph 42), there are no issues with the physical condition of the Mortgaged Property that the Mortgage Loan Seller believes would have a material adverse effect on the current marketability or principal use of the Mortgaged Property other than those disclosed in the engineering report or Servicing File and those addressed in sub-clauses (x), (y), and (z) of the preceding sentence.

Condition of Property. The Mortgage Loan Seller or the originator of the Mortgage Loan inspected or caused to be inspected each related Mortgaged Property within six months of origination of the Mortgage Loan and within twelve months of the Cut-off Date. An engineering report or property condition assessment was prepared by a third party engineering consultant in connection with the origination of each Mortgage Loan no more than twelve months prior to the Cut-off Date. To the Mortgage Loan Seller’s knowledge, based solely upon the due diligence customarily performed by the Mortgage Loan Seller in connection with the origination of similar commercial and multifamily loans intended for securitization, and except as set forth in such engineering report or property condition report or with respect to which repairs were required to be reserved for or made, (a) all major building systems for the improvements of each related Mortgaged Property are in good working order, and (b) each related Mortgaged Property (i) is free of any material damage, and (ii) is in good repair and condition, and (iii) is free of patent and observable structural defects, except, except to the extent as to all statements in clauses (a) and (b) above, to the extent: ) (x) any damage or deficiencies would not reasonably be expected to materially and adversely affect the use or operation of the Mortgaged Property or the security intended to be provided by such Mortgage, or repairs with respect to such damage or deficiencies are estimated to not exceed 5% of the original principal balance of the Mortgage Loan, the amount necessary to effect the necessary; (y) such repairs have been completed; or (z) escrows in an aggregate amount consistent with the standards utilized by the Mortgage Loan Seller in connection with the origination of similar commercial and multifamily loans intended for securitization, which escrows will in all events be in an aggregate amount not less than the estimated cost of such repairs. To the Mortgage Loan Seller’s knowledge, based on the engineering report or property condition assessment and the Sponsor Diligence (as defined in paragraph 42), there are no issues with the physical condition of the Mortgaged Property that the Mortgage Loan Seller believes would have a material adverse effect on the current marketability or principal use of the Mortgaged Property other than those disclosed in the engineering report or Servicing File and those addressed in sub-clauses (x), (y), and (z) of the preceding sentence.

Condition of Property. The Mortgage Loan Seller or the originator of the Mortgage Loan inspected or caused to be inspected each related Mortgaged Property within six months of origination of the Mortgage Loan and within twelve months of the Cut-off Date. An engineering report or property condition assessment was prepared by a third party engineering consultant in connection with the origination of each Mortgage Loan no more than twelve months prior to the Cut-off Date. To the Mortgage Loan Seller’s knowledge, based solely upon the due diligence customarily performed by the Mortgage Loan Seller in connection with the origination of similar commercial and multifamily loans intended for securitization, and except as set forth in such engineering report or property condition report or with respect to which repairs were required to be reserved for or made, (a) all major building systems for the improvements of each related Mortgaged Property are in good working order, and (b) each related Mortgaged Property (i) is free of any material damage, and (ii) is in good repair and condition, and (iii) is free of patent and observable structural defects, except, as to all statements in clauses (a) and (b) above, to the extent: extent (x) any damage or deficiencies would not reasonably be expected to materially and adversely affect the use or operation of the Mortgaged Property or the security intended to be provided by such Mortgage, or repairs with respect to such damage or deficiencies are estimated to not exceed 5% of the original principal balance of the Mortgage Loan; (y) such repairs have been completed; or (z) escrows in an aggregate amount consistent with the standards utilized by the Mortgage Loan Seller in connection with the origination of similar commercial and multifamily loans intended for securitization, which escrows will in all events be in an aggregate amount not less than the estimated cost of such repairs. To the Mortgage Loan Seller’s knowledge, based on the engineering report or property condition assessment and the Sponsor Diligence (as defined in paragraph 42), there are no issues with the physical condition of the Mortgaged Property that the Mortgage Loan Seller believes would have a material adverse effect on the current marketability or principal use of the Mortgaged Property other than those disclosed in the engineering report or Servicing File and those addressed in sub-clauses (x), (y), and (z) of the preceding sentence.

Condition of Property. The Mortgage Loan Seller or the originator of the Mortgage Loan inspected or caused to be inspected each related Mortgaged Property within six months of origination of the Mortgage Loan and within twelve months of the Cut-off Date. An engineering report or property condition assessment was prepared by a third party engineering consultant in connection with the origination of each Mortgage Loan no more than twelve months prior to the Cut-off Date. To the Mortgage Loan Seller’s knowledge, based solely upon the due diligence customarily performed by the Mortgage Loan Seller in connection with the origination of similar commercial and multifamily loans intended for securitization, and except as set forth in such engineering report or property condition report or with respect to which repairs were required to be reserved for or made, (a) all major building systems for the improvements of each related Mortgaged Property are in good working order, and (b) each related Mortgaged Property (i) is free of any material damage, and (ii) is in good repair and condition, and (iii) is free of patent and observable structural defects, except, as to all statements in clauses (a) and (b) above, to the extent: (x) any damage or deficiencies would not reasonably be expected to materially and adversely affect the use or operation of the Mortgaged Property or the security intended to be provided by such Mortgage, or repairs with respect to such damage or deficiencies are estimated to not exceed 5% of the original principal balance of the Mortgage Exh. C-5 Loan; (y) such repairs have been completed; or (z) escrows in an aggregate amount consistent with the standards utilized by the Mortgage Loan Seller in connection with the origination of similar commercial and multifamily loans intended for securitization, which escrows will in all events be in an aggregate amount not less than the estimated cost of such repairs. To the Mortgage Loan Seller’s knowledge, based on the engineering report or property condition assessment and the Sponsor Diligence (as defined in paragraph 42), there are no issues with the physical condition of the Mortgaged Property that the Mortgage Loan Seller believes would have a material adverse effect on the current marketability or principal use of the Mortgaged Property other than those disclosed in the engineering report or Servicing File and those addressed in sub-clauses (x), (y), and (z) of the preceding sentence. 13.

Condition of Property. The Mortgage Loan Seller or the originator of the Mortgage Loan inspected or caused to be inspected each related Mortgaged Property within six months of origination of the Mortgage Loan and within twelve months of the Cut-off Date. An engineering report or property condition assessment was prepared by a third party engineering consultant in connection with the origination of each Mortgage Loan no more than twelve months prior to the Cut-off Date. To the Mortgage Loan Seller’s knowledge, based solely upon the due diligence customarily performed by the Mortgage Loan Seller in connection with the origination of similar commercial and multifamily loans intended for securitization, and except as set forth in such engineering report or property condition report or with respect to which repairs were required to be reserved for or made, (a) all major building systems for the improvements of each related Mortgaged Property are in good working order, and (b) each related Mortgaged Property (i) is free of any material damage, and (ii) is in good repair and condition, and (iii) is free of patent and observable structural defects, except, as to all statements in clauses (a) and (b) above, to the extent: ; (x) any damage or deficiencies would not reasonably be expected to materially and adversely affect the use or operation of the Mortgaged Property or the security intended to be provided by such Mortgage, or repairs with respect to such damage or deficiencies are estimated to not exceed 5% of the original principal balance of the Mortgage Loan; (y) such repairs have been completed; or (z) escrows in an aggregate amount consistent with the standards utilized by the Mortgage Loan Seller in connection with the origination of similar commercial and multifamily loans intended for securitization, which escrows will in all events be in an aggregate amount not less than the estimated cost of such repairs. To the Mortgage Loan Seller’s knowledge, based on the engineering report or property condition assessment and the Sponsor Diligence (as defined in paragraph 42), there are no issues with the physical condition of the Mortgaged Property that the Mortgage Loan Seller believes would have a material adverse effect on the current marketability or principal use of the Mortgaged Property other than those disclosed in the engineering report or Servicing File and those addressed in sub-clauses (x), (y), and (z) of the preceding sentence.

Condition of Property. The Mortgage Loan Seller or the originator of the Mortgage Loan inspected or caused to be inspected each related Mortgaged Property within six months of origination of the Mortgage Loan and within twelve months of the Cut-off Date. An engineering report or property condition assessment was prepared by a third party engineering consultant in connection with the origination of each Mortgage Loan no more than twelve months prior to the Cut-off Date. To the Mortgage Loan Seller’s knowledge, based solely upon the due diligence customarily performed by the Mortgage Loan Seller in connection with the origination of similar commercial and multifamily loans intended for securitization, and except as set forth in such engineering report or property condition report or with respect to which repairs were required to be reserved for or made, (a) all major building systems for the improvements of each related Mortgaged Property are in good working order, and (b) each related Mortgaged Property (i) is free of any material damage, and (ii) is in good repair and condition, and (iii) is free of patent and observable structural defects, except, except to the extent as to all statements in clauses (a) and (b) above, to the extent: (x) any damage or deficiencies would not reasonably be expected to materially and adversely affect the use or operation of the Mortgaged Property or the security intended to be provided by such Mortgage, or repairs with respect to such damage or deficiencies are estimated to not exceed 5% of the original principal balance of the Mortgage Loan, the amount necessary to effect the necessary; (y) such repairs have been completed; or (z) escrows in an aggregate amount consistent with the standards utilized by the Mortgage Loan Seller in connection with the origination of similar commercial and multifamily loans intended for securitization, which escrows will in all events be in an aggregate amount not less than the estimated cost of such repairs. To the Mortgage Loan Seller’s knowledge, based on the engineering report or property condition assessment and the Sponsor Diligence (as defined in paragraph 42), there are no issues with the physical condition of the Mortgaged Property that the Mortgage Loan Seller believes would have a material adverse effect on the current marketability or principal use of the Mortgaged Property other than those disclosed in the engineering report or Servicing File and those addressed in sub-clauses (x), (y), and (z) of the preceding sentence.

Condition of Property. The Mortgage Loan Seller or the originator of the Mortgage Loan inspected or caused to be inspected each related Mortgaged Property within six months of origination of the Mortgage Loan and within twelve months of the Cut-off Off Date. An engineering report or property condition assessment was prepared by a third party engineering consultant in connection with the origination of each Mortgage Loan no more than twelve months prior to the Cut-off Off Date. To the Mortgage Loan Seller’s knowledge, based solely upon the due diligence customarily performed by the Mortgage Loan Seller in connection with the origination of similar commercial and multifamily loans intended for securitizationwhich indicates that, and except as set forth in such engineering report or property condition report assessment or with respect to which repairs were required to be reserved for or made, (a) all major building systems for the improvements of each related Mortgaged Property are in good working order, and (b) further indicates that each related Mortgaged Property (ia) is free of any material damage, and (iib) is in good repair and condition, and (iiic) is free of patent and observable structural defects, except, as to all statements in clauses (a) and (b) above, except to the extent: extent (xi) any damage or deficiencies that would not reasonably be expected to materially and adversely affect the use use, operation or operation value of the Mortgaged Property or the security intended to be provided by such Mortgage, the Mortgage or repairs with respect to such damage or deficiencies are estimated to either (x) cost less than $50,000 in the aggregate per Mortgaged Property or (y) not exceed 5% of the original principal balance of the related Mortgage Loan; (yii) such repairs have been completed; or (ziii) escrows in an aggregate amount consistent with the standards utilized by the Mortgage Loan Seller in connection with the origination of respect to similar commercial and multifamily loans intended it originates for securitizationsecuritization have been established, which escrows will in all events be in an aggregate amount not less than the estimated cost of such repairs. To the Mortgage Loan Seller’s knowledge, based on the engineering report or property condition assessment and the Sponsor Diligence (as defined in paragraph 42), there are The Seller has no knowledge of any material issues with respect to the physical condition of the Mortgaged Property that the Mortgage Loan Seller believes would have a material adverse effect on the current marketability use, operation or principal use value of the Mortgaged Property other than those disclosed in the engineering report or Servicing File property condition assessment and those addressed in sub-clauses (xi), (y), ii) and (ziii) of the preceding sentence.

Condition of Property. The Mortgage Loan Seller or the originator of the Mortgage Loan inspected or caused to be inspected each related Mortgaged Property within six months of origination of the Mortgage Loan and within twelve months of the Cut-off Date. An engineering report or property condition assessment was prepared by a third party engineering consultant in connection with the origination of each Mortgage Loan no more than twelve months prior to the Cut-off Date. To the Mortgage Loan Seller’s knowledge, based solely upon the due diligence customarily performed by the Mortgage Loan Seller in connection with the origination of similar commercial and multifamily loans intended for securitization, and except as set forth in such engineering report or property condition report or with respect to which repairs were required to be reserved for or made, (a) all major building systems for the improvements of each related Mortgaged Property are in good working order, and (b) each related Mortgaged Property (i) is free of any material damage, and (ii) is in good repair and condition, and (iii) is free of patent and observable structural defects, exceptexcept to the extent, as to all statements in clauses (a) and (b) above, to the extent: (x) any damage or deficiencies would not reasonably be expected to materially and adversely affect the use or operation of the Mortgaged Property or the security intended to be provided by such Mortgage, or repairs with respect to such damage or deficiencies are estimated to not exceed 5% of the original principal balance of the Mortgage Exh. C-5 Loan, the amount necessary to effect the necessary; (y) such repairs have been completed; or (z) escrows in an aggregate amount consistent with the standards utilized by the Mortgage Loan Seller in connection with the origination of similar commercial and multifamily loans intended for securitization, which escrows will in all events be in an aggregate amount not less than the estimated cost of such repairs. To the Mortgage Loan Seller’s knowledge, based on the engineering report or property condition assessment and the Sponsor Diligence (as defined in paragraph 42), there are no issues with the physical condition of the Mortgaged Property that the Mortgage Loan Seller believes would have a material adverse effect on the current marketability or principal use of the Mortgaged Property other than those disclosed in the engineering report or Servicing File and those addressed in sub-clauses (x), (y), and (z) of the preceding sentence. 13.

Condition of Property. The Mortgage Loan Seller or the originator of the Mortgage Loan inspected or caused to be inspected each related Mortgaged Property within six months of origination of the Mortgage Loan and within twelve months of the Cut-off Date. An engineering report or property condition assessment was prepared by a third party engineering consultant in connection with the origination of each Mortgage Loan no more than twelve months prior to the Cut-off Date. To the Mortgage Loan Seller’s knowledge, based solely upon the due diligence customarily performed by the Mortgage Loan Seller in connection with the origination of similar commercial and multifamily loans intended for securitization, and except as set forth in such engineering report or property condition report or with respect to which repairs were required to be reserved for or made, (a) all major building systems for the improvements of each related Mortgaged Property are in good working order, and (b) each related Mortgaged Property (i) is free of any material damage, and (ii) is in good repair and condition, and (iii) is free of patent and observable structural defects, except, as to all statements in clauses (a) and (b) above, to the extent: (x) any damage or deficiencies would not reasonably be expected to materially and adversely affect the use or operation of the Mortgaged Property or the security intended to be provided by such Mortgage, or repairs with respect to such damage or deficiencies are estimated to not exceed 5% of the original principal balance of the Mortgage Exh. C-5 Loan, the amount necessary to effect the necessary; (y) such repairs have been completed; or (z) escrows in an aggregate amount consistent with the standards utilized by the Mortgage Loan Seller in connection with the origination of similar commercial and multifamily loans intended for securitization, which escrows will in all events be in an aggregate amount not less than the estimated cost of such repairs. To the Mortgage Loan Seller’s knowledge, based on the engineering report or property condition assessment and the Sponsor Diligence (as defined in paragraph 42), there are no issues with the physical condition of the Mortgaged Property that the Mortgage Loan Seller believes would have a material adverse effect on the current marketability or principal use of the Mortgaged Property other than those disclosed in the engineering report or Servicing File and those addressed in sub-clauses (x), (y), and (z) of the preceding sentence. 13.