Contracting Shippers' Obligations Sample Clauses

Contracting Shippers' Obligations. Contracting Shippers shall each furnish TEPPCO with all information which Contracting Shippers are required to furnish to TEPPCO within the time limits expressly required hereunder. Decisions and approvals required of Contracting Shippers under the Contract Documents shall be provided within a reasonable time, not to exceed six (6) days.
AutoNDA by SimpleDocs

Related to Contracting Shippers' Obligations

  • Developer’s Obligations 7.1.1 In consideration of the Rights hereby granted, the Developer shall pay to the Authority an annual fee of Rs. /- (Rupees only) (“Fee”) commencing from the 1st (first) anniversary of Appointed Date. The Fee is exclusive of GST and all other applicable taxes and shall be payable by the Developer at actual over and above the Fee. The Fee is payable to the Authority on or before 30 (thirty) days prior to the start of every year in advance as set out in Schedule 1 throughout the Agreement Period. During the Agreement Period the Fee shall be increased by 5% (five percent) every year over the previous year’s Fee on compounded basis. 7.1.2 The Developer should pay the Fee to the Authority notwithstanding the fact that, the development of Project Facilities is not completed within the specified period or Developer does not start the commercial operation of the Project. In other words, the Developer shall not be entitled to seek any reduction of Fee, claim, damages, compensation or any other consideration from the Authority on account of any reason. 7.1.3 Any delay in payment of the Fee shall attract an interest for the delayed period at the rate of SBI PLR plus 5% per annum on the outstanding amount, which shall be due from the date of such payment till the amount is realized by the Authority. In addition to the foregoing, any delay in payment of Fee beyond a period of 60 (sixty) days from the due date of such payment will be construed to be Material Breach under this Agreement.

  • SUPPLIER’S OBLIGATIONS 6.1. The Supplier shall perform the Services substantially in accordance with the Service Definition Document and with reasonable skill and care. 6.2. Clause 6.1 shall not apply to the extent of any non-conformance which is caused by use of the Services by the Customer contrary to the Supplier's instructions, or modification or alteration of the Services by any party other than the Supplier or the Supplier's duly authorised contractors or agents. If the Services do not conform with the provisions of clause 6.1, the Supplier will, at its expense, use reasonable endeavours to correct any such non-conformance promptly, or provide the Customer with an alternative means of accomplishing the desired performance. Such correction or substitution constitutes the Customer's sole and exclusive remedy for any breach of clause 6.1. Notwithstanding the foregoing, the Supplier: 6.2.1. does not warrant that the Customer's use of the Services will be uninterrupted or error-free; or that the Services, Service Definition Document and/or the information obtained by the Customer through the Services will meet the Customer's requirements; and 6.2.2. is not responsible for any delays, delivery failures, or any other loss or damage resulting from the transfer of data over communications networks and facilities, including the internet, and the Customer acknowledges that the Services and Service Definition Document may be subject to limitations, delays and other problems inherent in the use of such communications facilities. 6.3. This agreement shall not prevent the Supplier from entering into similar agreements with third parties, or from independently developing, using, selling or licensing documentation, products and/or services which are similar to those provided under this agreement. 6.4. The Supplier warrants that it has and will maintain all necessary licences, consents, and permissions necessary for the performance of its obligations under this agreement.

  • Customer’s Obligations 8.1 The Customer shall: (a) ensure that the terms of the Order and (if submitted by the Customer) the Goods Specification are complete and accurate; (b) co-operate with the Supplier in all matters relating to the Services; (c) provide the Supplier, its employees, agents, consultants and subcontractors, with access to the Customer's premises, office accommodation and other facilities as reasonably required by the Supplier to provide the Services; (d) provide the Supplier with such information and materials as the Supplier may reasonably require to supply the Services, and ensure that such information is accurate in all material respects; (e) obtain and maintain all necessary licences, permissions and consents which may be required for the Services before the date on which the Services are to start; (f) keep and maintain all materials, equipment, documents and other property of the Supplier (Supplier Materials) at the Customer's premises in safe custody at its own risk, maintain the Supplier Materials in good condition until returned to the Supplier, and not dispose of or use the Supplier Materials other than in accordance with the Supplier's written instructions or authorisation; and 8.2 If the Supplier's performance of any of its obligations in respect of the Services is prevented or delayed by any act or omission by the Customer or failure by the Customer to perform any relevant obligation (Customer Default): (a) the Supplier shall without limiting its other rights or remedies have the right to suspend performance of the Services until the Customer remedies the Customer Default, and to rely on the Customer Default to relieve it from the performance of any of its obligations to the extent the Customer Default prevents or delays the Supplier's performance of any of its obligations; (b) the Supplier shall not be liable for any costs or losses sustained or incurred by the Customer arising directly or indirectly from the Supplier's failure or delay to perform any of its obligations as set out in this clause 8.2; and (c) the Customer shall reimburse the Supplier on written demand for any costs or losses sustained or incurred by the Supplier arising directly or indirectly from the Customer Default.

  • HIRER’S OBLIGATIONS a) The Hirer acknowledges having received the Vehicle in a clean condition, with a full fuel tank and full bottle of gas (if applicable). The Hirer will return the Vehicle in a clean condition with a full fuel tank and a full bottle of gas (if applicable, and subject to any pre-purchase fuel and/or pre- purchase gas option being taken), on the Return Date at the time and at the Return Point set out in the Rental Agreement. b) The Hirer must ensure that all reasonable care is taken in handling and parking the Vehicle and that it is left securely locked when not in use. c) The Hirer must ensure that the recommended levels are maintained with respect to the water in the radiator and battery, the oil and the tyre pressures of the Vehicle. d) Smoking and/or animals (excluding registered guide or assistance dogs) are not permitted in the Vehicle at any time. If this condition is breached, the Hirer must pay to JUCY a cleaning fee determined by JUCY in its reasonable opinion and being not more than $250. e) The Hirer must ensure that all Authorised Drivers comply with, and all Authorised Drivers shall be bound by, these terms and conditions and all Authorised Drivers must carry their driver’s licence with them when driving the Vehicle. f) In the event of any new damage to the Vehicle, the Hirer must notify JUCY of the full circumstances of the damage as soon as practicable (being not more than 48 hours) from the time the Hirer has knowledge of the damage. g) If there is an equipment defect or mechanical failure of the Vehicle during the Term of Hire, the Hirer must notify JUCY as soon as practicable, and in any event within 48 hours, from the time the Hirer has knowledge of the defect or failure to give JUCY the opportunity to rectify the problem during the Term of Hire. JUCY does not accept liability for any claims submitted after this period. h) The Hirer must ensure that a copy of this Agreement is kept in the Vehicle throughout the Term of Hire and produced without delay for inspection on demand by an enforcement officer i) The Hirer shall not: i) drive or use the Vehicle (or permit the Vehicle to be driven or used) otherwise than in a prudent and cautious manner. For the purposes of these terms and conditions, a single Vehicle rollover shall be considered a breach of this clause 6(i) unless the Stress Free Plus excess reduction has been taken out;

  • The Supplier's Obligations The Supplier will in writing, by the time and date specified by the Contracting Body in accordance with paragraph 3.1.3(b) provide the Contracting Body with either: 3.2.1 a statement to the effect that it does not wish to tender in relation to the relevant Service Requirements; or 3.2.2 the Statement of Work and full details of its tender made in respect of the relevant Statement of Requirements. In the event that the Supplier submits a Statement of Work, it should include, as a minimum: a) an email response subject line to comprise unique reference number and Supplier name, so as to clearly identify the Supplier; b) a brief summary, in the email (followed by a confirmation letter), stating whether or not the Supplier is bidding for the Statement of Requirements; c) a proposal covering the Services Requirements; and d) confirmation of discounts applicable to the work, as referenced in Framework Agreement Schedule 3 (Charging Structure). 3.2.3 The Supplier shall ensure that any prices submitted in relation to a further competition held pursuant to this paragraph 3 shall be based on the Charging Structure and take into account any discount to which the Contracting Body may be entitled as set out in Framework Agreement Schedule 3 (Charging Structure). 3.2.4 The Supplier agrees that: a) all tenders submitted by the Supplier in relation to a further competition held pursuant to this paragraph 3 shall remain open for acceptance by the Contracting Body for ninety (90) Working Days (or such other period specified in the invitation to tender issued by the relevant Contracting Body in accordance with the Ordering Procedure); and b) all tenders submitted by the Supplier are made and will be made in good faith and that the Supplier has not and will not fix(ed) or adjust(ed) the amount of the offer by or in accordance with any agreement or arrangement with any other person. The Supplier certifies that it has not and undertakes that it will not: (a) communicate to any person other than the person inviting these offers the amount or approximate amount of the offer, except where the disclosure, in confidence, of the approximate amount of the offer was necessary to obtain quotations required for the preparation of the offer; and (b) enter into any arrangement or agreement with any other person that he or the other person(s) shall refrain from making an offer or as to the amount of any offer to be submitted.

  • Owner’s Obligations 5.1 The Owners shall pay all sums due to the Managers punctually in accordance with the terms of this Agreement. 5.2 Where the Managers are providing Technical Management in accordance with sub-clause 3.2, the Owners shall: (i) procure that all officers and ratings supplied by them or on their behalf comply with the requirements of STCW 95; (ii) instruct such officers and ratings to obey all reasonable orders of the Managers in connection with the operation of the Managers’ safety management system. 5.3 Where the Managers are not providing Technical Management in accordance with sub-clause 3.2, the Owners shall procure that the requirements of the law of the flag of the Vessel are satisfied and that they, or such other entity as may be appointed by them and identified to the Managers, shall be deemed to be the “Company” as defined by the ISM Code assuming the responsibility for the operation of the Vessel and taking over the duties and responsibilities imposed by the ISM Code when applicable.

  • Contractor’s Obligations Pursuant to this contract, the Contractor agrees to provide the specific services detailed herein and shall be responsible for the following:

  • Managers’ Obligations 4.1 The Managers undertake to use their best endeavours to provide the agreed Management Services as agents for and on behalf of the Owners in accordance with sound ship management practice and to protect and promote the interests of the Owners in all matters relating to the provision of services hereunder. Provided, however, that the Managers in the performance of their management responsibilities under this Agreement shall be entitled to have regard to their overall responsibility in relation to all vessels as may from time to time be entrusted to their management and in particular, but without prejudice to the generality of the foregoing, the Managers shall be entitled to allocate available supplies, manpower and services in such manner as in the prevailing circumstances the Managers in their absolute discretion consider to be fair and reasonable. 4.2 Where the Managers are providing Technical Management in accordance with sub-clause 3.2, they shall procure that the requirements of the law of the flag of the Vessel are satisfied and they shall in particular be deemed to be the “Company” as defined by the ISM Code, assuming the responsibility for the operation of the Vessel and taking over the duties and responsibilities imposed by the ISM Code when applicable.

  • Processor’s Obligations Except where expressly permitted by Article 28 (3)(a) GDPR, Processor shall process data subjects’ Data only within the scope of the Agreement and the instructions issued by Controller. Where Processor believes that an instruction would be in breach of applicable law, Processor shall notify Controller of such belief without undue delay. Processor shall be entitled to suspend performance on such instruction until Controller confirms or modifies such instruction. Processor shall, within Processor’s scope of responsibility, organize Processor’s internal organization so it satisfies the specific requirements of data protection. Processor shall implement technical and organizational measures to ensure the adequate protection of Controller’s Data, which measures shall fulfil the requirements of the GDPR and specifically its Article 32. Processor shall implement technical and organizational measures and safeguards that ensure ongoing confidentiality, integrity, availability and resilience of processing systems and services and shall implement a process for regularly testing, assessing and evaluating the effectiveness of technical and organizational measures for ensuring the security of the processing. Controller is familiar with these technical and organizational measures, and it shall be Controller’s responsibility that such measures ensure a level of security appropriate to the risk. The parties agree to refer to the existing certification of Processor by Kiwa International Cert GmbH in accordance with DIN ISO/IEC 27001:2015 which is considered sufficient evidence for these purposes by Controller and which is available on the website of Processor (xxx.xxxxxxx.xxx). Processor reserves the right to modify the measures and safeguards implemented, provided, however, that that the level of security shall not be less protective than initially agreed upon. Processor shall support Controller, insofar as is agreed upon by the parties, and where possible for Processor, in fulfilling data subjects’ requests and claims, as detailed in chapter III of the GDPR and in fulfilling the obligations enumerated in Articles 33 to 36 GDPR. Processor shall ensure that all employees involved in Contract Processing of Controller’s Data and other such persons as may be involved in Contract Processing within Processor’s scope of responsibility shall only do so within the scope of the instructions. Furthermore, Processor shall ensure that any person entitled to process Data on behalf of Controller has undertaken a commitment to confidentiality under terms similar to the confidentiality terms of the Agreement. All such confidentiality obligations shall survive the termination or expiration of such Contract Processing. Processor shall notify Controller without undue delay if Processor becomes aware of any Data breaches within Processor’s scope of responsibility. Processor shall implement the measures necessary for securing Data and for mitigating potential negative consequences for the data subject; the Processor shall coordinate such efforts with Controller without undue delay. Processor shall notify to Controller the point of contact for any issues related to data protection arising out of or in connection with the Agreement. The Exhibit provides for a list of the initially designated persons. Processor shall correct or erase Data if so instructed by Controller and where covered by the scope of the instructions permissible. Where an erasure, consistent with data protection requirements, or a corresponding restriction of processing is impossible, Processor shall, based on Controller’s instructions, and unless agreed upon differently in the Agreement, destroy, in compliance with data protection requirements, all carrier media and other material or return the same to Controller. In specific cases designated by Controller, such Data shall be stored or handed over. The associated cost for doing so and protective measures to put in place shall be agreed upon separately, unless already agreed upon in the Agreement. Processor shall, upon termination of Contract Processing and upon Controller’s instruction, return all Data, carrier media and other materials to Controller or delete the same. Where a data subject asserts any claims against Controller in accordance with Article 82 of the GDPR, Processor shall support Controller in defending against such claims, where possible at Controller’s cost as set out in Section 6 para. 3. Controller shall notify Processor without undue delay, and comprehensively, of any defect or irregularity with regard to provisions on data protection detected by Controller in the results of Processor’s work.

  • Vendor’s Obligations Vendor shall incur no further obligations in connection with the terminated work and on the date set in the notice of termination Vendor will stop work to the extent specified. Vendor shall also terminate outstanding orders and subcontracts as they relate to the terminated work. Vendor shall settle the liabilities and claims arising out of the termination of subcontracts and orders connected with the terminated work. The MTC or designee may direct Vendor to assign Vendor’s right, title, and interest under terminated orders or subcontracts to the MTC. Vendor must still complete the work not terminated by the notice of termination and may incur obligations as are necessary to do so.

Draft better contracts in just 5 minutes Get the weekly Law Insider newsletter packed with expert videos, webinars, ebooks, and more!