Creating a Game Clause Samples
Creating a Game. When the Employer makes a decision to create/add a new non premium game, the following procedure will apply:
Related to Creating a Game
Unbundled Copper Loop – Designed (UCL-D) 2.4.2.1 The UCL-D will be provisioned as a dry copper twisted pair loop that is unencumbered by any intervening equipment (e.g., filters, load coils, range extenders, digital loop carrier, or repeaters). The UCL-D will be offered in two versions - Short and Long. 2.4.2.2 A short UCL-D (18,000 feet or less) is provisioned according to Resistance Design parameters, may have up to 6,000 feet of bridged tap and will have up to 1300 ohms of resistance. 2.4.2.3 The long UCL-D (beyond 18,000 feet) is provisioned as a dry copper twisted pair longer than 18,000 feet and may have up to 12,000 feet of bridged tap and up to 2800 ohms of resistance. 2.4.2.4 The UCL-D is a designed circuit, is provisioned with a test point, and comes standard with a DLR. OC is a chargeable option for a UCL-D; however, OC is always required on UCLs where a reuse of existing facilities has been requested by Granite. 2.4.2.5 These loops are not intended to support any particular services and may be utilized by Granite to provide a wide-range of telecommunications services so long as those services do not adversely affect BellSouth’s network. This facility will include a Network Interface Device (NID) at the customer’s location for the purpose of connecting the loop to the customer’s inside wire. 2.4.2.6 BellSouth will make available the following UCL-Ds:
End User License Agreement This work is licensed under a Creative Commons Attribution-NonCommercial-NoDerivs 3.0 Unported License. ▇▇▇▇://▇▇▇▇▇▇▇▇▇▇▇▇▇▇▇.▇▇▇/licenses/by-nc-nd/3.0/ You are free to: Share: to copy, distribute and transmit the work Under the following conditions: Attribution: You must attribute the work in the manner specified by the author (but not in any way that suggests that they endorse you or your use of the work).
Sublicense to Use the Scudder Trademarks As exclusive licensee of the rights to use an▇ ▇▇▇▇▇cense the use of the "Scudder," "Scudder Investments" and "Scudder, Stevens & Clark, In▇." ▇▇▇dema▇▇▇ (▇▇gether, the "Scudde▇ ▇▇▇▇▇"), ▇▇▇ ▇ere▇▇ ▇▇ant the Trust a nonexclusive right ▇▇▇ ▇▇▇license to use (i) the "Scudder" name and mark as part of the Trust's name (the "Fund Nam▇"), ▇▇d (ii) the Scudder Marks in connection with the Trust's investment products ▇▇▇ ▇▇▇vices, in each case only for so long as this Agreement, any other investment management agreement between you or any organization which shall have succeeded to your business as investment manager ("your Successor") and the Trust, or any extension, renewal or amendment hereof or thereof remains in effect, and only for so long as you are a licensee of the Scudder Marks, provided however, that you agree to use your best ▇▇▇▇▇▇▇ to maintain your license to use and sublicense the Scudder Marks. The Trust agrees that it shall have no right to su▇▇▇▇▇▇▇e or assign rights to use the Scudder Marks, shall acquire no interest in the Scudder Marks oth▇▇ ▇▇▇▇ the rights granted herein, that all of t▇▇ ▇▇▇▇t's uses of the Scudder Marks shall inure to the benefit of Scudder Trust Company ▇▇ ▇▇▇er and licensor of the Scudder Marks (▇▇▇ "▇rademark Owner"), and that the Trust shall n▇▇ ▇▇▇▇lenge the validity of the Scudder Marks or the Trademark Owner's ownership thereof. The Tru▇▇ ▇▇▇▇her agrees that all services and products it offers in connection with the Scudder Marks shall meet commercially reasonable standards of dua▇▇▇▇, ▇s may be determined by you or the Trademark Owner from time to time, provided that you acknowledge that the services and products the Trust rendered during the one-year period preceding the date of this Agreement are acceptable. At your reasonable request, the Trust shall cooperate with you and the Trademark Owner and shall execute and deliver any and all documents necessary to maintain and protect (including but not limited to in connection with any trademark infringement action) the Scudder Marks and/or enter the Trust as a registered user thereof. ▇▇ ▇▇ch time as this Agreement or any other investment management agreement shall no longer be in effect between you (or your Successor) and the Trust, or you no longer are a licensee of the Scudder Marks, the Trust shall (to the extent that, and as soon a▇, ▇▇ ▇awfully can) cease to use the Fund Name or any other name indicating that it is advised by, managed by or otherwise connected with you (or your Successor) or the Trademark Owner. In no event shall the Trust use the Scudder Marks or any other name or mark confusingly similar there▇▇ (▇▇▇luding, but not limited to, any name or mark that includes the name "Scudder") if this Agreement or any other investment advisory agre▇▇▇▇▇ ▇etween you (or your Successor) and the Fund is terminated.
Developer License We grant you a non-assignable, non-sublicensable, non-exclusive, worldwide right and license for the number of Developer(s) indicated in the Order Form to install the Software on any number of Machines in order to internally use the Software to create, develop and test Applications. For clarity, a single Software license may be re-allocated to another Developer in the event that the original Developer is no longer employed by you or has been assigned to a new role where access to the Software will no longer be required on a permanent basis.
Unbundled Copper Loop – Non-Designed (UCL-ND 2.4.3.1 The UCL–ND is provisioned as a dedicated 2-wire metallic transmission facility from BellSouth’s Main Distribution Frame (MDF) to a customer’s premises (including the NID). The UCL-ND will be a “dry copper” facility in that it will not have any intervening equipment such as load coils, repeaters, or digital access main lines (DAMLs), and may have up to 6,000 feet of bridged tap between the End User’s premises and the serving wire center. The UCL-ND typically will be 1300 Ohms resistance and in most cases will not exceed 18,000 feet in length, although the UCL-ND will not have a specific length limitation. For Loops less than 18,000 feet and with less than 1300 Ohms resistance, the Loop will provide a voice grade transmission channel suitable for Loop start signaling and the transport of analog voice grade signals. The UCL-ND will not be designed and will not be provisioned with either a DLR or a test point. 2.4.3.2 The UCL-ND facilities may be mechanically assigned using BellSouth’s assignment systems. Therefore, the Loop Makeup (LMU) process is not required to order and provision the UCL-ND. However, CBX One-Stop can request LMU for which additional charges would apply. 2.4.3.3 For an additional charge, BellSouth also will make available Loop Testing so that CBX One-Stop may request further testing on the UCL-ND. Rates for Loop Testing are as set forth in Exhibit A of this Attachment. 2.4.3.4 UCL-ND Loops are not intended to support any particular service and may be utilized by CBX One-Stop to provide a wide-range of telecommunications services as long as those services do not adversely affect BellSouth’s network. The UCL- ND will include a NID at the customer’s location for the purpose of connecting the Loop to the customer’s inside wire. 2.4.3.5 OC will be provided as a chargeable option and may be utilized when the UCL-ND provisioning is associated with the reuse of BellSouth facilities. OC-TS does not apply to this product. 2.4.3.6 CBX One-Stop may use BellSouth’s Unbundled Loop Modification (ULM) offering to remove excessive bridged taps and/or load coils from any copper Loop within the BellSouth network. Therefore, some Loops that would not qualify as UCL-ND could be transformed into Loops that do qualify, using the ULM process.