Common use of Cutting, Patching Clause in Contracts

Cutting, Patching. Unless otherwise stated in this Agreement, the Contractor shall be responsible for any necessary cutting, fitting, and patching of the Project that may be required to properly receive the Work, to make its several parts join together properly, and to receive and provide for the work of other contractors or utilities, or as required by drawings and specifications to complete the Project. After such cutting, Contractor shall replace or restore or repair and make good all defective or patched work as required by the City Representative. He shall not cut, excavate, or otherwise alter any work in any manner or by a method or methods that will endanger the Project, adjacent property, workmen, the public, or the work of any other contractor. The Contractor shall check the location of all sleeves, openings, slots, etc., for the piping, ducts, breeching, conduits, louvers, grills, fans, etc., as they are laid out on the job. Pipes passing through concrete or masonry walls shall be protected by pipe sleeves two sizes larger than the pipe plus its installation to provide free movement. Under no condition shall structural, framing, or other parts or members subjected to computed stress be cut or disturbed without the approval of the City Representative. Any plates, studs or joists, or rafters that are approved to be cut to execute necessary work shall be securely strapped and braced to restore their strength by approved methods. Unless otherwise indicated in the Contract Documents, all pavement, rights-of-way, or driveways cut by the Contractor during the performance of the Project shall be returned to service as soon as possible and replaced or repaired within seven (7) calendar days of completion of the Project. All major thoroughfares must be repaired the same day as cut. The Contractor shall be responsible for the safety and welfare of the traveling public while construction work is being done and until the City accepts the Project. Contractor will replace, at his own expense, all pipe and accessories that may be broken, damaged, stolen, or lost and all materials that may become damaged, lost, stolen, or misused. City Representative's approval shall be obtained before cutting or drilling holes in concrete or masonry that tend to damage or weaken the load capacity.

Appears in 7 contracts

Samples: Agreement for General Contracting Services, Agreement for General Contracting Services, Agreement for General Contracting Services

AutoNDA by SimpleDocs

Cutting, Patching. Unless otherwise stated in this Agreement, the Contractor shall be responsible for any necessary cutting, fitting, and patching of the Project that may be required to properly receive the Work, to make its several parts join together properly, and to receive and provide for the work of other contractors or utilities, or as required by drawings and specifications to complete the Project. After such cutting, Contractor shall replace or restore or repair and make good all defective or patched work as required by the City Representative. He shall not cut, excavate, or otherwise alter any work in any manner or by a method or methods that will endanger the Project, adjacent property, workmen, the public, or the work of any other contractor. The Contractor shall check the location of all sleeves, openings, slots, etc., for the piping, ducts, breeching, conduits, louvers, grills, fans, etc., as they are laid out on the job. Pipes passing through concrete or masonry walls shall be protected by pipe sleeves two sizes larger than the pipe plus its installation to provide free movement. Under no condition shall structural, framing, or other parts or members subjected to computed stress be cut or disturbed without the approval of the City Representative. Any plates, studs or joists, or rafters that are approved to be cut to execute necessary work shall be securely strapped and braced to restore their strength by approved methods. Unless otherwise indicated in the Contract Documents, all pavement, rights-of-way, or driveways cut by the Contractor during the performance of the Project shall be returned to service as soon as possible and replaced or repaired within seven (7) calendar days of completion of the Project. All major thoroughfares must be repaired the same day as cut. The Contractor shall be responsible for the safety and welfare of the traveling public while construction work is being done and until the City accepts the Project. Contractor will replace, at his own expense, all pipe other portions of the playground and accessories that may be broken, damaged, stolen, or lost and all materials that may become damaged, lost, stolen, or misused. City Representative's approval shall be obtained before cutting or drilling holes in concrete or masonry that tend to damage or weaken the load capacity.

Appears in 1 contract

Samples: Agreement for General Contracting Services

AutoNDA by SimpleDocs

Cutting, Patching. Unless otherwise stated in this Agreement, the Contractor shall be responsible for any necessary cutting, fitting, and patching of the Project that may be required to properly receive the Work, to make its several parts join together properly, and to receive and provide for the work of other contractors or utilities, or as required by drawings and specifications to complete the Project. After such cutting, Contractor shall replace or restore or repair and make good all defective or patched work as required by the City Representative. He shall not cut, excavate, or otherwise alter any work in any manner or by a method or methods that will endanger the Project, adjacent property, workmen, the public, or the work of any other contractor. The Contractor shall check the location of all sleeves, openings, slots, etc., for the piping, ducts, breeching, conduits, louvers, grills, fans, etc., as they are laid out on the job. Pipes passing through concrete or masonry walls shall be protected by pipe sleeves two sizes larger than the pipe plus its installation to provide free movement. Under no condition shall structural, framing, or other parts or members subjected to computed stress be cut or disturbed without the approval of the City Representative. Any plates, studs or joists, or rafters that are approved to be cut to execute necessary work shall be securely strapped and braced to restore their strength by approved methods. Unless otherwise indicated in the Contract Documents, all pavement, rights-of-way, or driveways cut by the Contractor during the performance of the Project shall be returned to service as soon as possible and replaced or repaired within seven (7) calendar days of completion of the Project. All major thoroughfares must be repaired the same day as cut. The Contractor shall be responsible for the safety and welfare of the traveling public while construction work is being done and until the City accepts the Project. Contractor will replace, at his own expense, all pipe and accessories that may be broken, damaged, stolen, or lost and all materials that may become damaged, lost, stolen, or misused. City Representative's approval shall be obtained before cutting or drilling holes in concrete or masonry that tend to damage or weaken the load capacity.

Appears in 1 contract

Samples: Agreement

Time is Money Join Law Insider Premium to draft better contracts faster.