Technical Specifications The Technical Specifications furnished on the CD are intended to establish the standards for quality, performance and technical requirements for all labor, workmanship, material, methods and equipment necessary to complete the Work. When specifications and drawings are provided or referenced by the County, these are to be considered part of the Scope of Work, and to be specifically documented in the Detailed Scope of Work. For convenience, the County supplied specifications, if any, and the Technical Specifications furnished on the CD.
Plans and Specifications Tenant shall be solely responsible for the preparation of the final architectural, electrical and mechanical construction drawings, plans and specifications (called “plans”) necessary for Tenant to construct the Premises for Tenant’s occupancy, which plans shall be subject to approval by Landlord’s architect and engineers and shall comply with their reasonable requirements to avoid aesthetic or other conflicts with the design and function of the balance of the Building. Landlord’s approval is solely given for the benefit of Landlord, and neither Tenant nor any third party shall have the right to rely upon Landlord’s approval of Tenant’s plans for any purpose whatsoever other than that Landlord does not object thereto under this Lease. Landlord’s architects and engineers shall respond (with approval or disapproval) to any plan submission by Tenant within 8 business days after Landlord’s receipt thereof. If Landlord fails to respond to any such submission within such 8 business day period, which failure continues for more than 2 business days after Tenant gives Landlord a written notice (the “Deemed Approved Notice”) advising Landlord that such plan submission shall be deemed approved within 2 business days of Landlord’s receipt of the Deemed Approved Notice, then such plan submission shall be deemed approved hereunder. The Deemed Approved Notice shall, in order to be effective, contain on the first page thereof, in a font at least twice as large as the font of any other text contained in such notice, a legend substantially as follows: “FAILURE TO RESPOND TO THIS NOTICE WITHIN TWO (2) BUSINESS DAYS AFTER RECEIPT HEREOF SHALL CONSTITUTE LANDLORD’S APPROVAL OF SUBMITTED PLANS.” In the event Landlord’s architect’s or engineers’ approval of Tenant’s plans is withheld or conditioned, Landlord shall send prompt written notification thereof to Tenant and include a reasonably detailed statement identifying the reasons for such refusal or condition, and Tenant shall promptly have the plans revised by its architect to incorporate all reasonable objections and conditions presented by Landlord and shall resubmit such plans to Landlord. Landlord’s architects and engineers shall respond (with approval or disapproval) to any plan re-submission by Tenant within 8 business days after Landlord’s receipt thereof. Such process shall be followed until the plans shall have been approved by Landlord’s architect and engineers without unreasonable objection or condition. Without limiting the foregoing, Tenant shall be responsible for all elements of the design of Tenant’s plans (including, without limitation, compliance with law, functionality of design, the structural integrity of the design, the configuration of the Premises and the placement of Tenant’s furniture, appliances and equipment), and Landlord’s approval of Tenant’s plans shall in no event relieve Tenant of the responsibility for such design. Tenant agrees it shall be solely responsible for the timely preparation and submission of all such plans and for all elements of the design of such plans and for all costs related thereto. (The word “architect” as used in this Section 3.2 shall include an interior designer or space planner.) Tenant shall reimburse Landlord Landlord’s reasonable out-of-pocket expense incurred in connection with the review of Tenant’s plans.
Quality Specifications SANMINA-SCI shall comply with the quality specifications set forth in its Quality Manual, incorporated by reference herein, a copy of which is available from SANMINA-SCI upon request.
Specifications That part of the Contract Documents consisting of written requirements for materials, equipment, systems, standards, and workmanship as applied to the Work, and certain administrative requirements and procedural matters applicable thereto. The term "Specifications" shall also include all written matter in the Project Manual or on the drawings and any Addenda or Change Orders thereto.
APPROVAL OF PLANS AND SPECIFICATIONS The Plans and Specifications will conform to the requirements and conditions set out by applicable law or any effective restrictive covenant, and to all governmental authorities which exercise jurisdiction over the Leased Premises or the construction thereon.
Deliverables Upon satisfactory completion of the work authorization, the Engineer shall submit the deliverables as specified in the executed work authorization to the State for review and acceptance.
Project Schedule Construction must begin within 30 days of the date set forth in Appendix A, Page 2, for the start of construction, or this Agreement may become null and void, at the sole discretion of the Director. However, the Recipient may apply to the Director in writing for an extension of the date to initiate construction. The Recipient shall specify the reasons for the delay in the start of construction and provide the Director with a new start of construction date. The Director will review such requests for extensions and may extend the start date, providing that the Project can be completed within a reasonable time frame.
Product Specifications The Company agrees that all Products sold to Xxxx hereunder shall conform to the respective specifications set forth on Schedule A or to such other specifications as are from time to time agreed upon by the Parties.
Specification Changes Upon any change in the Product Specifications, stability protocols, QC laboratory methods raw material specification or Packaging Specifications (whether initiated by Horizon or made in response to a request by sanofi-aventis that is agreed to by Horizon), including the addition of new packaging configurations, new SKUs, new formulations, or a change in either raw materials or Packaging Component supply, Horizon shall promptly advise sanofi-aventis in writing of such changes, and sanofi-aventis shall promptly advise Horizon as to any scheduling and/or price adjustments which may result from such changes. Prior to implementation of such changes, the Parties shall negotiate in good faith in an attempt to reach agreement on (a) the new Product Price for any Product which embodies such changes, (b) any amounts to be reimbursed by Horizon to sanofi-aventis as described in the next sentence of this paragraph, and (c) any other amendments to this Agreement which may be necessitated by such changes (i.e., an adjustment to the lead time for purchase orders). Horizon shall reimburse sanofi-aventis for the mutually agreed upon reasonable expenses incurred by sanofi-aventis as a result of such changes, including, but not limited to, reimbursing sanofi-aventis for its mutually agreed validation and development costs, capital expenditure costs, costs for any Packaging Components or other materials rendered unusable as a result of such changes, and cost of required stability to support a change. If during the Term Horizon amends the Product Specifications or Packaging ***Confidential Treatment Requested MANUFACTURING AND SUPPLY AGREEMENT PAGE 7 Specifications (whether voluntarily or as required by law) so as to render obsolete quantities of the Active Ingredient, Excipients and/or Packaging Components for the Product on hand at sanofi-aventis, Horizon shall (i) accept the return of all such obsolete Active Ingredient and (ii) purchase from sanofi-aventis, at sanofi-aventis’ Acquisition Cost, all such obsolete Excipients and Packaging Components obtained by sanofi-aventis pursuant to its normal procurement policies to manufacture quantities of the Product pursuant to Horizon forecasts under Section 6.1. Sanofi-aventis’ normal procurement policies for purposes of the preceding sentence of this Article 5 shall be considered to be quantities of Excipients and Packaging Components corresponding to the immediately following […***…] months of Horizon’s most recent forecasted Product demand. If a change in Specifications is initiated by sanofi-aventis and approved by Horizon, any cost associated with said change shall be borne by sanofi-aventis. In the event that a change in Specifications is initiated by Horizon or driven by a regulatory or business change, the costs associated with qualification of the change shall be paid by Horizon. The amount of the change shall be reasonable and customary and subject to written approval by Horizon, such approval not to be unreasonably withheld. Sanofi-aventis, with written agreement and approval from Horizon, will be responsible for the appropriate (cGMP) destruction of any materials covered under this Article 5, and sanofi-aventis shall be reimbursed by Horizon at the reasonable and customary approved rate.
Changes to Specifications All Specifications and any changes thereto agreed to by the parties from time to time shall be in writing, dated and signed by the parties. Any change to the Packaging process shall be deemed a Specification change. No change in the Specifications shall be implemented by PCI, whether requested by Client, requested by PCI or requested or required by any Regulatory Authority, until the parties have agreed in writing to such change, the implementation date of such change, and any increase or decrease in costs, expenses or fees associated with such change (including any change to Pricing). PCI shall respond promptly to any request made by Client for a change in the Specifications, and both parties shall use commercially reasonable, good faith efforts to agree to the terms of such change in a timely manner. As soon as possible after a request is made for any change in Specifications, PCI shall notify Client of the costs associated with such change and shall provide such supporting documentation as Client may reasonably require. Client shall pay all costs associated with such agreed upon changes. If there is a conflict between the terms of this Agreement and the terms of the Specifications, this Agreement shall control. PCI reserves the right to postpone effecting changes to the Specifications, or in the case of changes requested or required by any Regulatory Authority postpone Packaging under this Agreement, until such time as the parties agree to and execute the required written amendment.