Delivery and Specifications Sample Clauses

Delivery and Specifications. Deliveries must be made on the delivery date specified in the P.O. during normal business hours or otherwise at the times specified in the P.O. Time is of the essence. Goods not timely delivered are non- conforming and shall constitute a material breach of the Agreement notwithstanding any other provision of these Terms and Conditions that may allow Supplier to replace non-conforming Goods. Supplier also agrees to pay whatever additional cost, expense, loss or damage Xxxxx sustains as a result of any delay or any other deviation from the P.O. in addition to any other damages or relief to which Xxxxx may be entitled. Supplier shall not use material or processes other than what is required by Xxxxx’x specifications (“Specifications”). Supplier represents and warrants that it shall not make any changes to the specifications, materials, processes, or location where the Goods are manufactured, without Xxxxx'x consent. Any delay caused by a material change shall be a breach of the Agreement. Xxxxx shall not be liable for material processed in excess of the volumes indicated in the P.O. Any over-deliveries are made at Supplier’s risk and shall not be reimbursed or paid for by Xxxxx, and Supplier shall pay for any return of such Goods. Until the Goods are delivered by Supplier to Xxxxx, Xxxxx shall have the right to cancel any future delivery on the P.O. for any reason.
Sample 1Sample 2Sample 3See All (7)
AutoNDA by SimpleDocs
Delivery and Specifications. Company will make the Newsletter --------------------------- available to Microsoft at a specified URL and on a delivery schedule agreed upon by the parties in writing. The Company Logo, Newsletter text description and the Newsletters are all subject to specifications and submissions guidelines (as applicable) established by Microsoft and set forth in Appendix A, as the same may be modified from time to time by Microsoft upon notice. Company will deliver the Company Logo and Newsletter text description to Microsoft in the manner directed by Microsoft. Company acknowledges that time is of the essence in providing the foregoing to Microsoft, and the Company's failure to meet the foregoing timing requirements or any applicable specifications may delay or prevent delivery of Copies hereunder.
Sample 1Sample 2See All (4)
Delivery and Specifications. Deliveries must be made on the delivery date specified in the P.O. during normal business hours or otherwise at the times specified in the P.O. Time is of the essence. Supplier shall not use material or processes other than what is required by Xxxxx’x specifications (“Specifications”). Supplier represents and warrants that it shall not make any changes to the specifications, materials, processes, or location where the Goods are manufactured, without Xxxxx'x consent. Any delay caused by a material change shall be a breach of the Agreement. Xxxxx shall not be liable for material processed in excess of the volumes indicated in the P.O. Any over-deliveries are made at Supplier’s risk and shall not be reimbursed or paid for by Xxxxx, but shall be returned by Xxxxx and Supplier shall bear the (reasonable) costs for any return of such Goods (also including any reasonable warehousing costs until return can be made). Until Supplier’s acceptance of the P.O., Xxxxx shall have the right to cancel (revoke) the P.O. (partially or totally) for any reason. Partial deliveries are not permitted unless Xxxxx agrees to them.
Sample 1Sample 2
Delivery and Specifications. Unless otherwise agreed by Aron, all deliveries of Jet Fuel delivered under the Forward Jet Fuel Transaction shall be in accordance with Section 8.5 above and all such Products shall conform to the specification requirements under Section 8.6 above.
Sample 1Sample 2
Delivery and Specifications. Unless otherwise agreed by Xxxx, all deliveries of Jet Fuel delivered under the Forward Jet Fuel Transaction shall be in accordance with Section 8.5 above and all such Products shall conform to the specification requirements under Section 8.6 above.
Sample 1
Delivery and Specifications. Company will make the Newsletter available to Microsoft at a specified URL and on a delivery schedule agreed upon by the parties in writing. The Company Logo, Newsletter text description and the
Sample 1
Delivery and Specifications. 2.1. Time shall not be of the essence with regard to delivery and any dates quoted are an estimate only. The Company may make partial deliveries. 2.2. Delivery shall take place at the Company’s premises unless agreed otherwise in which case any and all extra costs of delivery shall be charged to the Purchaser. 2.3. All illustrations and specifications relating to the goods are approximate only and the Company reserves the right to make such alterations as it thinks fit. Performance figures are approximate and not to be relied upon. 2.4. The Purchaser agrees that an order for goods by reference to a product name, number or description shall be to the Company's basic standard version of those goods and that supply of them will fulfil the Company's obligations. 2.5. The Company will endeavour to match colours in printing designs, logos, etc onto the goods, but perfect colour match shall not be required. 2.6. Where goods are supplied by the Company with barcode identification, reasonable efforts shall be made to ensure such codes are clear and decipherable by the Purchaser. However, the Company shall not be liable for any loss arising from unreadable or indecipherable barcodes. 2.7. If the Company is unable to deliver the quantity of goods contracted for it shall be entitled to deliver such quantity as it can deliver and charge accordingly. In any event, the Company may deliver up to 15% more or less in quantity (however measured) than stipulated by the Purchaser, and the Purchaser shall pay for the quantity actually delivered. 2.8. If the Purchaser does not accept delivery of the goods when tendered, risk in them passes to the Purchaser, and the Company may pass on to the Purchaser any and all additional costs and expenses incurred from, but not limited to, storage and delivery thereof. 2.9. The Company reserves the right to refuse to supply any and all undelivered orders to the Purchaser in the event that, at the time of ordering, the Purchaser is deemed by the Company to be in breach of any of the terms or conditions of the contract, or there are amounts which the Company deem overdue for payment at the time of the Purchaser placing an order and/or the Purchaser’s trading account is over the credit limit allocated by the Company.
Sample 1
AutoNDA by SimpleDocs

Related to Delivery and Specifications

  • DAF Specifications Developer shall submit initial specifications for the DAF, including System Protection Facilities, to Connecting Transmission Owner and NYISO at least one hundred eighty (180) Calendar Days prior to the Initial Synchronization Date; and final specifications for review and comment at least ninety (90) Calendar Days prior to the Initial Synchronization Date. Connecting Transmission Owner and NYISO shall review such specifications to ensure that the DAF are compatible with the technical specifications, operational control, and safety requirements of the Connecting Transmission Owner and NYISO and comment on such specifications within thirty (30) Calendar Days of Developer’s submission. All specifications provided hereunder shall be deemed to be Confidential Information.

  • The Specifications The Specifications are that portion of the Contract Documents consisting of the written requirements for materials, equipment, systems, standards and workmanship for the Work, and performance of related services.

  • Technical Specifications The Technical Specifications furnished on the CD are intended to establish the standards for quality, performance and technical requirements for all labor, workmanship, material, methods and equipment necessary to complete the Work. When specifications and drawings are provided or referenced by the County, these are to be considered part of the Scope of Work, and to be specifically documented in the Detailed Scope of Work. For convenience, the County supplied specifications, if any, and the Technical Specifications furnished on the CD.

  • Drawings and Specifications 9.1 A complete list of all Drawings that form a part of the Contract Documents are to be found as an index on the Drawings themselves, and/or may be provided to Developer and/or in the Table of Contents. 9.2 Materials or Work described in words that so applied have a well-known technical or trade meaning shall be deemed to refer to recognized standards, unless noted otherwise. 9.3 Trade Name or Trade Term It is not the intention of the Contract Documents to go into detailed descriptions of any materials and/or methods commonly known to the trade under “trade name” or “trade term.” The mere mention or notation of “trade name” or “trade term” shall be considered a sufficient notice to Developer that it will be required to complete the work so named, complete, finished, and operable, with all its appurtenances, according to the best practices of the trade. 9.4 The naming of any material and/or equipment shall mean furnishing and installing of same, including all incidental and accessory items thereto and/or labor therefor, as per best practices of the trade(s) involved, unless specifically noted otherwise. 9.5 Contract Documents are complementary, and what is called for by one shall be binding as if called for by all. As such, Drawings and Specifications are intended to be fully cooperative and to agree. However, if Developer observes that Drawings and Specifications are in conflict with the Contract Documents, Developer shall promptly notify District and Architect in writing, and any necessary changes shall be made as provided in the Contract Documents. 9.6 Figured dimensions shall be followed in preference to scaled dimensions, and Developer shall make all additional measurements necessary for the work and shall be responsible for their accuracy. Before ordering any material or doing any work, each Developer shall verify all measurements at the building and shall be responsible for the correctness of same. 9.7 Should any question arise concerning the intent or meaning of the Contract Documents, including the Plans and Specifications, the question shall be submitted to the District for interpretation. If a conflict exists in the Contract Documents, these Construction Provisions shall control over the Facilities Lease, which shall control over the Site Lease, which shall control over Division 1 Documents, which shall control over Division 2 through Division 49 documents, which shall control over figured dimensions, which shall control over large-scale drawings, which shall control over small-scale drawings. In no case shall a document calling for lower quality and/or quantity of material or workmanship control. However, in the case of discrepancy or ambiguity solely between and among the Drawings and Specifications, the discrepancy or ambiguity shall be resolved in favor of the interpretation that will provide District with the functionally complete and operable Project described in the Drawings and Specifications. 9.8 Drawings and Specifications are intended to comply with all laws, ordinances, rules, and regulations of constituted authorities having jurisdiction, and where referred to in the Contract Documents, the laws, ordinances, rules, and regulations shall be considered as a part of the Contract Documents within the limits specified. 9.9 As required by Section 4-317(c), Part 1, Title 24, CCR: “Should any existing conditions such as deterioration or non-complying construction be discovered which is not covered by the DSA-approved documents wherein the finished work will not comply with Title 24, California Code of Regulations, a construction change document, or a separate set of plans and specifications, detailing and specifying the required repair work shall be submitted to and approved by DSA before proceeding with the repair work.”

  • Plans and Specifications Tenant shall be solely responsible for the preparation of the final architectural, electrical and mechanical construction drawings, plans and specifications (called “plans”) necessary for Tenant to construct the Premises for Tenant’s occupancy, which plans shall be subject to approval by Landlord’s architect and engineers and shall comply with their reasonable requirements to avoid aesthetic or other conflicts with the design and function of the balance of the Building. Landlord’s approval is solely given for the benefit of Landlord, and neither Tenant nor any third party shall have the right to rely upon Landlord’s approval of Tenant’s plans for any purpose whatsoever other than that Landlord does not object thereto under this Lease. Landlord’s architects and engineers shall respond (with approval or disapproval) to any plan submission by Tenant within 8 business days after Landlord’s receipt thereof. If Landlord fails to respond to any such submission within such 8 business day period, which failure continues for more than 2 business days after Tenant gives Landlord a written notice (the “Deemed Approved Notice”) advising Landlord that such plan submission shall be deemed approved within 2 business days of Landlord’s receipt of the Deemed Approved Notice, then such plan submission shall be deemed approved hereunder. The Deemed Approved Notice shall, in order to be effective, contain on the first page thereof, in a font at least twice as large as the font of any other text contained in such notice, a legend substantially as follows: “FAILURE TO RESPOND TO THIS NOTICE WITHIN TWO (2) BUSINESS DAYS AFTER RECEIPT HEREOF SHALL CONSTITUTE LANDLORD’S APPROVAL OF SUBMITTED PLANS.” In the event Landlord’s architect’s or engineers’ approval of Tenant’s plans is withheld or conditioned, Landlord shall send prompt written notification thereof to Tenant and include a reasonably detailed statement identifying the reasons for such refusal or condition, and Tenant shall promptly have the plans revised by its architect to incorporate all reasonable objections and conditions presented by Landlord and shall resubmit such plans to Landlord. Landlord’s architects and engineers shall respond (with approval or disapproval) to any plan re-submission by Tenant within 8 business days after Landlord’s receipt thereof. Such process shall be followed until the plans shall have been approved by Landlord’s architect and engineers without unreasonable objection or condition. Without limiting the foregoing, Tenant shall be responsible for all elements of the design of Tenant’s plans (including, without limitation, compliance with law, functionality of design, the structural integrity of the design, the configuration of the Premises and the placement of Tenant’s furniture, appliances and equipment), and Landlord’s approval of Tenant’s plans shall in no event relieve Tenant of the responsibility for such design. Tenant agrees it shall be solely responsible for the timely preparation and submission of all such plans and for all elements of the design of such plans and for all costs related thereto. (The word “architect” as used in this Section 3.2 shall include an interior designer or space planner.) Tenant shall reimburse Landlord Landlord’s reasonable out-of-pocket expense incurred in connection with the review of Tenant’s plans.

  • General specifications For the purpose of this Regulation, the vehicle shall fulfil the following requirements:

  • Packing Specifications 7.3.1 A pack will contain a minimum of one message record or a maximum of 99,999 message records plus a pack header record and a pack trailer record. One transmission can contain a maximum of 99 packs and a minimum of one pack.

  • Quality Specifications SANMINA-SCI shall comply with the quality specifications set forth in its Quality Manual, incorporated by reference herein, a copy of which is available from SANMINA-SCI upon request.

  • Equipment Specifications All equipment must meet the contract specifications and all federal and State safety codes and regulations in effect at the date of manufacture. All equipment must be Original Equipment Manufacturer (OEM) equipment unless otherwise stated in the contract. All products, materials, supplies, replacement parts, and equipment offered and furnished must be new, of current manufacturer production, and must have been formally announced by the manufacturer as being commercially available, unless otherwise stated in this Contract.

  • Specifications That part of the Contract Documents consisting of written requirements for materials, equipment, systems, standards, and workmanship as applied to the Work, and certain administrative requirements and procedural matters applicable thereto. The term "Specifications" shall also include all written matter in the Project Manual or on the drawings and any Addenda or Change Orders thereto.

Draft better contracts in just 5 minutes Get the weekly Law Insider newsletter packed with expert videos, webinars, ebooks, and more!