Depiction of Listed Powers and/or New Powers Based on Examples in Marvel Sample Clauses

Depiction of Listed Powers and/or New Powers Based on Examples in Marvel approved Works - SPE would have the right to depict each Listed Power and/or each New Power in any way that does not materially deviate from any depiction of the applicable power(s) in any Authorized Work provided, however that SPE shall not have the right to depict an Incidental Depiction of a Power that is not a Listed Power. In other words, any manner in which a Listed Power or a New Power is depicted in any Authorized Work other than an Incidental Depiction would be fair game; and SPE would not be in breach as long as its portrayal of the applicable power does not materially deviate from the portrayal of that power in the Marvel Authorized Work. For example, if an episode of New Marvel Animation portrays Spider-Man as being able to lift 25 tons (rather than the 10 tons listed above) or shoot lasers out of his eyes, then SPE may depict these items in its Productions.
AutoNDA by SimpleDocs

Related to Depiction of Listed Powers and/or New Powers Based on Examples in Marvel

  • Preservation of Existence and Similar Matters Except as otherwise permitted under Section 9.4., the Borrower shall, and shall cause each other Loan Party and each other Subsidiary to, preserve and maintain its respective existence, rights, franchises, licenses and privileges in the jurisdiction of its incorporation or formation and qualify and remain qualified and authorized to do business in each jurisdiction in which the character of its properties or the nature of its business requires such qualification and authorization and where the failure to be so authorized and qualified could reasonably be expected to have a Material Adverse Effect.

  • Specific Provisions for Access Rights to Software For the avoidance of doubt, the general provisions for Access Rights provided for in this Section 9 are applicable also to Software. Parties’ Access Rights to Software do not include any right to receive source code or object code ported to a certain hardware platform or any right to receive respective Software documentation in any particular form or detail, but only as available from the Party granting the Access Rights.

  • Attachment C, Standard State Provisions for Contracts and Grants Attachment C is hereby deleted in its entirety and replaced by the Attachment C December 15, 2017 attached to this Amendment. Child Support (Applicable to natural persons only; not applicable to corporations, partnerships or LLCs). Contractor is under no obligation to pay child support or is in good standing with respect to or in full compliance with a plan to pay any and all child support payable under a support order as of the date of this amendment.

  • Use of Attachment Facilities by Third Parties Purpose of Attachment Facilities.‌‌ Except as may be required by Applicable Laws and Regulations, or as otherwise agreed to among the Parties, the Attachment Facilities shall be constructed for the sole purpose of interconnecting the Large Generating Facility to the New York State Transmission System and shall be used for no other purpose.

  • CFR PART 200 Domestic Preferences for Procurements As appropriate and to the extent consistent with law, the non-Federal entity should, to the greatest extent practicable under a Federal award, provide a preference for the purchase, acquisition, or use of goods, products, or materials produced in the United States (including but not limited to iron, aluminum, steel, cement, and other manufactured products). The requirements of this section must be included in all subawards including all contracts and purchase orders for work or products under this award. For purposes of 2 CFR Part 200.322, “Produced in the United States” means, for iron and steel products, that all manufacturing processes, from the initial melting stag through the application of coatings, occurred in the United States. Moreover, for purposes of 2 CFR Part 200.322, “Manufactured products” means items and construction materials composed in whole or in part of non-ferrous metals such as aluminum, plastics and polymer-based products such as polyvinyl chloride pipe, aggregates such as concrete, class, including optical fiber, and lumber. Pursuant to the above, when federal funds are expended by ESC Region 8 and TIPS Members, Vendor certifies that to the greatest extent practicable Vendor will provide a preference for the purchase, acquisition, or use of goods, products, or materials produced in the United States (including but not limited to iron, aluminum, steel, cement, and other manufactured products). Does vendor agree? Yes

  • Chief Executive Office; Change of Name; Jurisdiction of Organization (a) The exact legal name, type of organization, jurisdiction of organization, federal taxpayer identification number, organizational identification number and chief executive office of such Grantor is indicated next to its name in Sections I.A. and I.B. of the Perfection Certificate. Such Grantor shall furnish to the Collateral Agent prompt written notice of any change in (i) its corporate name, (ii) the location of its chief executive office, its principal place of business, any office in which it maintains books or records relating to Collateral owned by it or any office or facility at which Collateral owned by it is located (including the establishment of any such new office or facility), (iii) its identity or type of organization or corporate structure, (iv) its federal taxpayer identification number or organizational identification number or (v) its jurisdiction of organization (in each case, including, without limitation, by merging with or into any other entity, reorganizing, dissolving, liquidating, reincorporating or incorporating in any other jurisdiction). Such Grantor agrees (A) not to effect or permit any such change unless all filings have been made under the UCC or otherwise that are required in order for the Collateral Agent to continue at all times following such change to have a valid, legal and perfected first priority security interest in all the Collateral (subject to, with respect to priority, Permitted Encumbrances having priority by operation of law) and (B) to take all action reasonably satisfactory to the Collateral Agent to maintain the perfection and priority of the security interest of the Collateral Agent for the benefit of the Credit Parties in the Collateral intended to be granted hereunder. Each Grantor agrees to promptly provide the Collateral Agent with certified Organization Documents reflecting any of the changes described in the preceding sentence. (b) The Collateral Agent may rely on opinions of counsel as to whether any or all UCC financing statements of the Grantors need to be amended as a result of any of the changes described in SECTION 4.3(a). If any Grantor fails to provide information to the Collateral Agent about such changes on a timely basis, the Collateral Agent shall not be liable or responsible to any party for any failure to maintain a perfected security interest in such Grantor’s property constituting Collateral, for which the Collateral Agent needed to have information relating to such changes. The Collateral Agent shall have no duty to inquire about such changes if any Grantor does not inform the Collateral Agent of such changes, the parties acknowledging and agreeing that it would not be feasible or practical for the Collateral Agent to search for information on such changes if such information is not provided by any Grantor.

  • Legal Action; Utilization of Special Receivership Powers The Assuming Institution shall notify the Receiver in writing (such notice to be given in accordance with Article V below and to include all relevant details) prior to utilizing in any legal action any special legal power or right which the Assuming Institution derives as a result of having acquired an asset from the Receiver, and the Assuming Institution shall not utilize any such power unless the Receiver shall have consented in writing to the proposed usage. The Receiver shall have the right to direct such proposed usage by the Assuming Institution and the Assuming Institution shall comply in all respects with such direction. Upon request of the Receiver, the Assuming Institution will advise the Receiver as to the status of any such legal action. The Assuming Institution shall immediately notify the Receiver of any judgment in litigation involving any of the aforesaid special powers or rights.

  • Amendments and Supplements to Permitted Section 5(d) Communications If at any time following the distribution of any Permitted Section 5(d) Communication, there occurred or occurs an event or development as a result of which such Permitted Section 5(d) Communication included or would include an untrue statement of a material fact or omitted or would omit to state a material fact necessary in order to make the statements therein, in the light of the circumstances existing at that subsequent time, not misleading, the Company will promptly notify the Representatives and will promptly amend or supplement, at its own expense, such Permitted Section 5(d) Communication to eliminate or correct such untrue statement or omission.

  • Geographic Area and Sector Specific Allowances, Conditions and Exceptions The following allowances and conditions shall apply where relevant. Where the Employer does work which falls under the following headings, the Employer agrees to pay and observe the relevant respective conditions and/or exceptions set out below in each case.

  • Unbundled Loop Modifications (Line Conditioning 2.5.1 Line Conditioning is defined as routine network modification that BellSouth regularly undertakes to provide xDSL services to its own customers. This may include the removal of any device, from a copper Loop or copper Subloop that may diminish the capability of the Loop or Subloop to deliver high-speed switched wireline telecommunications capability, including xDSL service. Such devices include, load coils, excessive bridged taps, low pass filters, and range extenders. Excessive bridged taps are bridged taps that serves no network design purpose and that are beyond the limits set according to industry standards and/or the BellSouth’s TR 73600 Unbundled Local Loop Technical Specification. 2.5.2 BellSouth will remove load coils only on copper Loops and Subloops that are less than eighteen thousand (18,000) feet in length. 2.5.3 For any copper loop being ordered by NewPhone which has over six thousand (6,000) feet of combined bridged tap will be modified, upon request from NewPhone, so that the loop will have a maximum of six thousand (6,000) feet of bridged tap. This modification will be performed at no additional charge to NewPhone. Loop conditioning orders that require the removal of bridged tap that serves no network design purpose on a copper Loop that will result in a combined total of bridged tap between two thousand five hundred (2,500) and six thousand (6,000) feet will be performed at the rates set forth in Exhibit A. 2.5.4 NewPhone may request removal of any unnecessary and non-excessive bridged tap (bridged tap between zero (0) and two thousand five hundred (2,500) feet which serves no network design purpose), at rates pursuant to BellSouth’s SC Process as mutually agreed to by the Parties. 2.5.5 Rates for ULM are as set forth in Exhibit A. 2.5.6 BellSouth will not modify a Loop in such a way that it no longer meets the technical parameters of the original Loop type (e.g., voice grade, ADSL, etc.) being ordered. 2.5.7 If NewPhone requests ULM on a reserved facility for a new Loop order, BellSouth may perform a pair change and provision a different Loop facility in lieu of the reserved facility with ULM if feasible. The Loop provisioned will meet or exceed specifications of the requested Loop facility as modified. NewPhone will not be charged for ULM if a different Loop is provisioned. For Loops that require a DLR or its equivalent, BellSouth will provide LMU detail of the Loop provisioned. 2.5.8 NewPhone shall request Loop make up information pursuant to this Attachment prior to submitting a service inquiry and/or a LSR for the Loop type that NewPhone desires BellSouth to condition. 2.5.9 When requesting ULM for a Loop that BellSouth has previously provisioned for NewPhone, NewPhone will submit a SI to BellSouth. If a spare Loop facility that meets the Loop modification specifications requested by NewPhone is available at the location for which the ULM was requested, NewPhone will have the option to change the Loop facility to the qualifying spare facility rather than to provide ULM. In the event that BellSouth changes the Loop facility in lieu of providing ULM, NewPhone will not be charged for ULM but will only be charged the service order charges for submitting an order.

Draft better contracts in just 5 minutes Get the weekly Law Insider newsletter packed with expert videos, webinars, ebooks, and more!