Common use of Discretionary Alterations, Modifications and Additions Clause in Contracts

Discretionary Alterations, Modifications and Additions. (i) Except as set forth in the preceding clause (a) or the following clause (ii), Lessee shall not make any alteration, modification or addition to (A) the Airframe or any galleys, lavatories, avionics, APU or Engines without the prior written consent of Lessor or (B) any other Item of Equipment unless in accordance with the requirements of the Maintenance Program and the regulations of the Certificating Authorities. (ii) Notwithstanding the provisions of the preceding clause (i), Lessor’s consent shall not be required for any discretionary alteration, modification or addition that Lessee wishes to perform to the Aircraft or any Item of Equipment provided that any such alteration, modification or addition does not require or result in a modification to the Aircraft structure or electrical wiring system, and is: (A) for the installation of additional or enhanced Items of Equipment (and not in substitution for the same); or (B) is cosmetic (and non-structural) in nature in order for Lessee to display its name, logo or other identification or advertising; or (C) to the Aircraft interior configuration that (1) utilizes the existing seat track system (without modification), (2) does not require the addition to, removal of or modification of any Aircraft structure, (3) does not impair the value or utility of the Aircraft or any Item of Equipment or adversely affect compliance with the type certificate data sheet of the Aircraft, and (4) does not cause any change in the category or status of the Aircraft as defined by the Manufacturer. Notwithstanding anything to the contrary herein, Lessee may request Lessor’s written consent to return the Aircraft in such modified configuration at the time of the request of such modification or subsequent to that and prior to the Termination Date, and such written consent shall be at Lessor’s sole discretion, and shall be nonrevocable by Lessor.

Discretionary Alterations, Modifications and Additions. (i) Except as set forth in the preceding clause (a) or the following clause (ii), Lessee shall not make any alteration, modification or addition to (A) the Airframe Aircraft or any Item of Equipment (including, but not limited to, galleys, lavatories, avionics, APU avionics or Engines Engines) without the prior written consent of Lessor or Lessor, which consent shall not be unreasonably withheld and shall be deemed given in the absence of a response within ten (B10) any other Item Business Days following Lessor’s receipt of Equipment unless in accordance with the requirements of the Maintenance Program and the regulations of the Certificating AuthoritiesLessee’s written request. (ii) Notwithstanding the provisions of the preceding clause (i), Lessor’s consent shall not be required for any discretionary alteration, modification or addition that Lessee wishes to perform to the Aircraft or any Item of Equipment provided that any such alteration, modification or addition does not require or result in a modification to the Aircraft structure or electrical wiring system, and is: (A) for the installation of additional or enhanced Items of Equipment (and not in substitution for the same); , unless replacing a Part with another Part that is of a higher modification status) or (B) is cosmetic (and non-structural) in nature in order for Lessee to display its name, logo or other identification or advertising; or (C) to the Aircraft interior configuration that (1) utilizes utilises the existing seat track system (without modification), (2) does not require the addition to, removal of or modification of any Aircraft structure, (3) does not impair the value or utility of the Aircraft or any Item of Equipment or adversely affect compliance with the type certificate data sheet of the Aircraft, and (4) does not cause any change in the category or status of the Aircraft as defined by the Manufacturer. Notwithstanding anything to the contrary herein, Lessee may request Lessor’s written consent to return the Aircraft in such modified configuration at the time of the request of such modification or subsequent to that and prior to the Termination Date, and such written consent shall be at Lessor’s sole discretion, and shall be nonrevocable by Lessor.

Discretionary Alterations, Modifications and Additions. (i) Except as set forth in the preceding clause (a) or the following clause (ii), Lessee shall not make any alteration, modification or addition to (A) the Airframe Aircraft or any Item of Equipment (including, but not limited to, galleys, lavatories, avionics, APU avionics or Engines Engines) without the prior written consent of Lessor or Lessor, which consent shall not be unreasonably withheld and shall be deemed given in the absence of a response within ten (B10) any other Item Business Days following Lessor’s receipt of Equipment unless in accordance with the requirements of the Maintenance Program and the regulations of the Certificating AuthoritiesLessee’s written request. (ii) Notwithstanding the provisions of the preceding clause (i), Lessor’s consent shall not be required for any discretionary alteration, modification or addition that Lessee wishes to perform to the Aircraft or any Item of Equipment provided that any such alteration, modification or addition does not require or result in a modification to the Aircraft structure or electrical wiring system, and is: (A) for the installation of additional or enhanced Items of Equipment (and not in substitution for the same, unless replacing a Part with another Part that is of a higher modification status); or (B) is cosmetic (and non-structural) in nature in order for Lessee to display its name, logo or other identification or advertising; or (C) to the Aircraft interior configuration that (1) utilizes utilises the existing seat track system (without modification), (2) does not require the addition to, removal of or modification of any Aircraft structure, (3) does not impair the value or utility of the Aircraft or any Item of Equipment or adversely affect compliance with the type certificate data sheet of the Aircraft, and (4) does not cause any change in the category or status of the Aircraft as defined by the Manufacturer. Notwithstanding anything to the contrary herein, Lessee may request Lessor’s written consent to return the Aircraft in such modified configuration at the time of the request of such modification or subsequent to that and prior to the Termination Date, and such written consent shall be at Lessor’s sole discretion, and shall be nonrevocable by Lessor.27 ARTICLE 12 MAINTENANCE MODIFICATION AND OPERATION OF THE AIRCRAFT

Discretionary Alterations, Modifications and Additions. (i) Except as set forth in the preceding clause (a) or the following clause (ii), Lessee shall not make any alteration, modification or addition to (A) the Airframe Aircraft or any Item of Equipment (including, but not limited to, galleys, lavatories, avionics, APU avionics or Engines Engines) without the prior written consent of Lessor or Lessor, which consent shall not be unreasonably withheld and shall be deemed given in the absence of a response within ten (B10) any other Item Business Days following Lessor’s receipt of Equipment unless in accordance with the requirements of the Maintenance Program and the regulations of the Certificating AuthoritiesLessee’s written request. (ii) Notwithstanding the provisions of the preceding clause (i), Lessor’s consent shall not be required for any discretionary alteration, modification or addition that Lessee wishes to perform to the Aircraft or any Item of Equipment provided that any such alteration, modification or addition does not require or result in a modification to the Aircraft structure or electrical wiring system, and is: (A) for the installation of additional or enhanced Items of Equipment (and not in substitution for the same, unless replacing a Part with another Part that is of a higher modification status); or (B) is cosmetic (and non-structural) in nature in order for Lessee to display its name, logo or other identification or advertising; or (C) to the Aircraft interior configuration that (1) utilizes utilises the existing seat track system (without modification), (2) does not require the addition to, removal of or modification of any Aircraft structure, (3) does not impair the value or utility of the Aircraft or any Item of Equipment or adversely affect compliance with the type certificate data sheet of the Aircraft, and (4) does not cause any change in the category or status of the Aircraft as defined by the Manufacturer. Notwithstanding anything to the contrary herein, Lessee may request Lessor’s written consent to return the Aircraft in such modified configuration at the time of the request of such modification or subsequent to that and prior to the Termination Date, and such written consent shall be at Lessor’s sole discretion, and shall be nonrevocable by Lessor.the

Discretionary Alterations, Modifications and Additions. (i) Except as set forth in the preceding clause (a) or the following clause (ii), Lessee shall not make any alteration, modification or addition to (A) the Airframe Aircraft or any Item of Equipment (including, but not limited to, galleys, lavatories, avionics, APU avionics or Engines Engines) without the prior written consent of Lessor or Lessor, which consent shall not be unreasonably withheld and shall be deemed given in the absence of a response within ten (B10) any other Item Business Days following Lessor’s receipt of Equipment unless in accordance with the requirements of the Maintenance Program and the regulations of the Certificating AuthoritiesLessee’s written request. (ii) Notwithstanding the provisions of the preceding clause (i), Lessor’s consent shall not be required for any discretionary alteration, modification or addition that Lessee wishes to perform to the Aircraft or any Item of Equipment provided that any such alteration, modification or addition does not require or result in a modification to the Aircraft structure or electrical wiring system, and is: (A) for the installation of additional or enhanced Items of Equipment (and not in substitution for the same, unless replacing a Part with another Part that is of a higher modification status); or (B) is cosmetic (and non-structural) in nature in order for Lessee to display its name, logo or other identification or advertising; or (C) to the Aircraft interior configuration that (1) utilizes utilises the existing seat track system (without modification), (2) does not require the addition to, removal of or modification of any Aircraft structure, (3) does not impair the value or utility of the Aircraft or any Item of Equipment or adversely affect compliance with the type certificate data sheet of the Aircraft, and (4) does not cause any change in the category or status of the Aircraft as defined by the Manufacturer. Notwithstanding anything to the contrary herein, Lessee may request Lessor’s written consent to return the Aircraft in such modified configuration at the time of the request of such modification or subsequent to that and prior to the Termination Date, and such written consent shall be at Lessor’s sole discretion, and shall be nonrevocable by Lessor.

Discretionary Alterations, Modifications and Additions. (i) Except as set forth in the preceding clause (a) or the following clause (ii), Lessee shall not make any alteration, modification or addition to (A) the Airframe Aircraft or any Item of Equipment (including, but not limited to, galleys, lavatories, avionics, APU avionics or Engines Engines) without the prior written consent of Lessor or Lessor, which consent shall not be unreasonably withheld and shall be deemed given in the absence of a response within ten (B10) any other Item Business Days following Lessor’s receipt of Equipment unless in accordance with the requirements of the Maintenance Program and the regulations of the Certificating AuthoritiesLessee’s written request. (ii) Notwithstanding the provisions of the preceding clause (i), Lessor’s consent shall not be required for any discretionary alteration, modification or addition that Lessee wishes to perform to the Aircraft or any Item of Equipment provided that any such alteration, modification or addition does not require or result in a modification to the Aircraft structure or electrical wiring system, and is: (A) for the installation of additional or enhanced Items of Equipment (and not in substitution for the same, unless replacing a Part with another Part that is of a higher modification status); or (B) is cosmetic (and non-structural) in nature in order for Lessee to display its name, logo or other identification or advertising; or (C) to the Aircraft interior configuration that (1) utilizes utilises the existing seat track system (without modification), (2) does not require the addition to, removal of or modification of any Aircraft structure, (3) does not impair the value or utility of the Aircraft or any Item of Equipment or adversely affect compliance with the type certificate data sheet of the Aircraft, and (4) does not cause any change in the category or status of the Aircraft as defined by the Manufacturer. Notwithstanding anything to the contrary herein, Lessee may request Lessor’s written consent to return the Aircraft in such modified configuration at the time of the request of such modification or subsequent to that and prior to the Termination Date, and such written consent shall be at Lessor’s sole discretion, and shall be nonrevocable by Lessor.