Certification of Meeting or Exceeding Tobacco-Free Workplace Policy Minimum Standards A. Grantee certifies that it has adopted and enforces a Tobacco-Free Workplace Policy that meets or exceeds all of the following minimum standards of:
i. Prohibiting the use of all forms of tobacco products, including but not limited to cigarettes, cigars, pipes, water pipes (hookah), bidis, kreteks, electronic cigarettes, smokeless tobacco, snuff and chewing tobacco;
ii. Designating the property to which this Policy applies as a "designated area,” which must at least comprise all buildings and structures where activities funded under this Grant Agreement are taking place, as well as Grantee owned, leased, or controlled sidewalks, parking lots, walkways, and attached parking structures immediately adjacent to this designated area;
iii. Applying to all employees and visitors in this designated area; and
iv. Providing for or referring its employees to tobacco use cessation services.
B. If Grantee cannot meet these minimum standards, it must obtain a waiver from the System Agency.
Special Permit from Relevant Ministerial/ Government Agencies and Foreign Capital Ownership Limitation Raw Material for Explosives (Ammonium Nitrate) with maximum foreign equity ownership of 49% and a special permit from the Minister of Defense (ISIC 2411) Industry of explosive materials and its components for industry need with maximum foreign equity ownership of 49% and a special permit from the Minister of Defense (ISIC 2429) Sugar Industry (Xxxxx Xxxxxxx Sugar, Refined Crystal Sugar and Raw Crystal Sugar) with maximum foreign equity ownership of 95% and a special permit from the Minister of Industry and the Minister of Agriculture, and it has to be integrated with the sugar plantation. The manufacturing of raw crystal sugar is required for any sugar manufacturer with sugarcane input capacity exceeding 8000 tons per day (ISIC 1542) Processing of plantation product industry (similar capacity or exceeding a certain capacity, according to Regulation of Minister of Agriculture Number 26 of 2007 with maximum foreign capital ownership of 95% with a special permit from Minister of Agriculture. - Fiber and Seed Cotton Industry (ISIC1514, 1711) - Crude oil industry (edible oil) from vegetable and animal, coconut oil industry, palm oil industry, rubber to be sheet, thick latex, crumb rubber industry, raw castor oil industry, sugar, sugar cane and sugar cane residue industry, black tea/green tea industry, dry tobacco leaves industry, Copra, Fiber, Coconut Charcoal, Dust, Nata de coco industry, Coffee sorting, cleaning and peeling industry, Cocoa cleaning, peeling and drying industry, cleaning and peeling seed other than coffee and cacao industry, cashew to be dry seed cashew and Cashew Nut Shell Liquid (CNSL) Industry, Peppercorn to be dry white pepper and dry black pepper industry (ISIC 1514, 2429, 1542, 1549, 1600, 2519, 1531)
Certification Regarding Prohibition of Boycotting Israel (Tex Gov. Code 2271)
CFR PART 200 Domestic Preferences for Procurements As appropriate and to the extent consistent with law, the non-Federal entity should, to the greatest extent practicable under a Federal award, provide a preference for the purchase, acquisition, or use of goods, products, or materials produced in the United States (including but not limited to iron, aluminum, steel, cement, and other manufactured products). The requirements of this section must be included in all subawards including all contracts and purchase orders for work or products under this award. For purposes of 2 CFR Part 200.322, “Produced in the United States” means, for iron and steel products, that all manufacturing processes, from the initial melting stag through the application of coatings, occurred in the United States. Moreover, for purposes of 2 CFR Part 200.322, “Manufactured products” means items and construction materials composed in whole or in part of non-ferrous metals such as aluminum, plastics and polymer-based products such as polyvinyl chloride pipe, aggregates such as concrete, class, including optical fiber, and lumber. Pursuant to the above, when federal funds are expended by ESC Region 8 and TIPS Members, Vendor certifies that to the greatest extent practicable Vendor will provide a preference for the purchase, acquisition, or use of goods, products, or materials produced in the United States (including but not limited to iron, aluminum, steel, cement, and other manufactured products). Does vendor agree? Yes
State of California Public Liability and Workers’ Compensation Program A. The Judicial Council has elected to be self-insured for its motor vehicle, aircraft liability and general liability exposures.
B. The Judicial Council administers workers’ compensation benefits for its employees through a Third Party agreement.
Sector Sub-Sector Industry Classification Level of Government Type of Obligation Description of Measure Source of Measure All sectors : : - : Central : National Treatment Senior Management and Board of Directors : National Treatment and the Senior Management and Board of Directors obligations shall not apply to any measure relating to small and medium sized domestic market enterprise2. Foreign equity is restricted to a maximum of 40% for domestic market enterprises with paid-in equity capital of less than the equivalent of USD 200,000 Note: Members of the Board of Directors or governing body of corporation or associations shall be allowed in proportion to their allowable participation or share in the capital of such enterprises. : -1987 Constitution of the Republic of the Philippines. - Foreign Investments Act of 1991 (R.A. No. 7042, as amended by R.A. No. 8179). -Presidential and Administrative Issuances. ∞ 2 The concept of a small and medium sized domestic market enterprise is an enterprise with paid in equity capital of less than the equivalent of USD 200,000.00.
Anti-Money Laundering and Red Flag Identity Theft Prevention Programs The Trust acknowledges that it has had an opportunity to review, consider and comment upon the written procedures provided by USBFS describing various tools used by USBFS which are designed to promote the detection and reporting of potential money laundering activity and identity theft by monitoring certain aspects of shareholder activity as well as written procedures for verifying a customer’s identity (collectively, the “Procedures”). Further, the Trust and USBFS have each determined that the Procedures, as part of the Trust’s overall Anti-Money Laundering Program and Red Flag Identity Theft Prevention Program, are reasonably designed to: (i) prevent each Fund from being used for money laundering or the financing of terrorist activities; (ii) prevent identity theft; and (iii) achieve compliance with the applicable provisions of the Bank Secrecy Act, Fair and Accurate Credit Transactions Act of 2003 and the USA Patriot Act of 2001 and the implementing regulations thereunder. Based on this determination, the Trust hereby instructs and directs USBFS to implement the Procedures on the Trust’s behalf, as such may be amended or revised from time to time. It is contemplated that these Procedures will be amended from time to time by the parties as additional regulations are adopted and/or regulatory guidance is provided relating to the Trust’s anti-money laundering and identity theft responsibilities. USBFS agrees to provide to the Trust:
(a) Prompt written notification of any transaction or combination of transactions that USBFS believes, based on the Procedures, evidence money laundering or identity theft activities in connection with the Trust or any Fund shareholder;
(b) Prompt written notification of any customer(s) that USBFS reasonably believes, based upon the Procedures, to be engaged in money laundering or identity theft activities, provided that the Trust agrees not to communicate this information to the customer;
(c) Any reports received by USBFS from any government agency or applicable industry self-regulatory organization pertaining to USBFS’ Anti-Money Laundering Program or the Red Flag Identity Theft Prevention Program on behalf of the Trust;
(d) Prompt written notification of any action taken in response to anti-money laundering violations or identity theft activity as described in (a), (b) or (c) immediately above; and
(e) Certified annual and quarterly reports of its monitoring and customer identification activities pursuant to the Procedures on behalf of the Trust. The Trust hereby directs, and USBFS acknowledges, that USBFS shall (i) permit federal regulators access to such information and records maintained by USBFS and relating to USBFS’ implementation of the Procedures, on behalf of the Trust, as they may request, and (ii) permit such federal regulators to inspect USBFS’ implementation of the Procedures on behalf of the Trust.
CERTIFICATION PROHIBITING DISCRIMINATION AGAINST FIREARM AND AMMUNITION INDUSTRIES (Texas law as of September 1, 2021) By submitting a proposal to this Solicitation, you certify that you agree, when it is applicable, to the following required by Texas law as of September 1, 2021: If (a) company is not a sole proprietorship; (b) company has at least ten (10) full-time employees; (c) this contract has a value of at least $100,000 that is paid wholly or partly from public funds; (d) the contract is not excepted under Tex. Gov’t Code § 2274.003 of SB 19 (87th leg.); and (e) governmental entity has determined that company is not a sole-source provider or governmental entity has not received any bids from a company that is able to provide this written verification, the following certification shall apply; otherwise, this certification is not required. Pursuant to Tex. Gov’t Code Ch. 2274 of SB 19 (87th session), the company hereby certifies and verifies that the company, or association, corporation, partnership, joint venture, limited partnership, limited liability partnership, or limited liability company, including a wholly owned subsidiary, majority-owned subsidiary parent company, or affiliate of these entities or associations, that exists to make a profit, does not have a practice, policy, guidance, or directive that discriminates against a firearm entity or firearm trade association and will not discriminate during the term of this contract against a firearm entity or firearm trade association. For purposes of this contract, “discriminate against a firearm entity or firearm trade association” shall mean, with respect to the entity or association, to: “
(1) refuse to engage in the trade of any goods or services with the entity or association based solely on its status as a firearm entity or firearm trade association; (2) refrain from continuing an existing business relationship with the entity or association based solely on its status as a firearm entity or firearm trade association; or (3) terminate an existing business relationship with the entity or association based solely on its status as a firearm entity or firearm trade association. See Tex. Gov’t Code § 2274.001(3) of SB 19. “Discrimination against a firearm entity or firearm trade association” does not include: “
(1) the established policies of a merchant, retail seller, or platform that restrict or prohibit the listing or selling of ammunition, firearms, or firearm accessories; and (2) a company’s refusal to engage in the trade of any goods or services, decision to refrain from continuing an existing business relationship, or decision to terminate an existing business relationship to comply with federal, state, or local law, policy, or regulations or a directive by a regulatory agency, or for any traditional business reason that is specific to the customer or potential customer and not based solely on an entity’s or association’s status as a firearm entity or firearm trade association.” See Tex. Gov’t Code § 2274.001(3) of SB 19.
Release of Claims Under Age Discrimination in Employment Act Without limiting the generality of the foregoing, Executive agrees that by executing this Release, he has released and waived any and all claims he has or may have as of the date of this Release for age discrimination under the Age Discrimination in Employment Act, 29 U.S.C. § 621, et seq. It is understood that Executive is advised to consult with an attorney prior to executing this Release; that he in fact has consulted a knowledgeable, competent attorney regarding this Release; that he may, before executing this Release, consider this Release for a period of twenty-one (21) calendar days; and that the consideration he receives for this Release is in addition to amounts to which he was already entitled. It is further understood that this Release is not effective until seven (7) calendar days after the execution of this Release and that Executive may revoke this Release within seven (7) calendar days from the date of execution hereof.
Labor Code Notice 2.6.1 All A-E and subcontractors must comply with the requirements of California Labor Code 1770 et seq. if the work performed is considered a “public works” under California Labor Code 1720 et seq. A-E is encouraged to contact the California Department of Industrial Relations for clarification if the A-E is unsure if some or any of the work performed under this CONTRACT qualifies as “public works”.
